Showing 1–16 of 38 results
-

€10.99
Freshen up or customize your clip-in pedals with crankbrothers anodised alloy 6mm hex end caps kits. Contains 2 end caps per kit. Compatible with the following pedals: Eggbeater (1, 2, 3, 11) Candy (1, 2, 3) Mallet (2, 3, E, DH) Doubleshot 1 Stamp 1 Gen 1 Stamp 2 Gen 1 Stamp 3 Gen 1…
-

€10.99
Freshen up or customize your clip-in pedals with crankbrothers anodised alloy 6mm hex end caps kits. Contains 2 end caps per kit. Compatible with the following pedals: Eggbeater (1, 2, 3, 11) Candy (1, 2, 3) Mallet (2, 3, E, DH) Doubleshot 1 Stamp 1 Gen 1 Stamp 2 Gen 1 Stamp 3 Gen 1…
-

€10.99
Freshen up or customize your clip-in pedals with crankbrothers anodised alloy 6mm hex end caps kits. Contains 2 end caps per kit. Compatible with the following pedals: Eggbeater (1, 2, 3, 11) Candy (1, 2, 3) Mallet (2, 3, E, DH) Doubleshot 1 Stamp 1 Gen 1 Stamp 2 Gen 1 Stamp 3 Gen 1…
-

€10.99
Freshen up or customize your clip-in pedals with crankbrothers anodised alloy 6mm hex end caps kits. Contains 2 end caps per kit. Compatible with the following pedals: Eggbeater (1, 2, 3, 11) Candy (1, 2, 3) Mallet (2, 3, E, DH) Doubleshot 1 Stamp 1 Gen 1 Stamp 2 Gen 1 Stamp 3 Gen 1…
-

€10.99
Freshen up or customize your clip-in pedals with crankbrothers anodised alloy 6mm hex end caps kits. Contains 2 end caps per kit. Compatible with the following pedals: Eggbeater (1, 2, 3, 11) Candy (1, 2, 3) Mallet (2, 3, E, DH) Doubleshot 1 Stamp 1 Gen 1 Stamp 2 Gen 1 Stamp 3 Gen 1…
-

€10.99
Freshen up or customize your clip-in pedals with crankbrothers anodised alloy 6mm hex end caps kits. Contains 2 end caps per kit. Compatible with the following pedals: Eggbeater (1, 2, 3, 11) Candy (1, 2, 3) Mallet (2, 3, E, DH) Doubleshot 1 Stamp 1 Gen 1 Stamp 2 Gen 1 Stamp 3 Gen 1…
-

€10.99
Freshen up or customize your clip-in pedals with crankbrothers anodised alloy 6mm hex end caps kits. Contains 2 end caps per kit. Compatible with the following pedals: Eggbeater (1, 2, 3, 11) Candy (1, 2, 3) Mallet (2, 3, E, DH) Doubleshot 1 Stamp 1 Gen 1 Stamp 2 Gen 1 Stamp 3 Gen 1…
-

€10.99
Sleeves snap on to the next gen candy and eggbeaters to tighten the interface between the shoe and pedal. Includes: 1mm, 2mm, 3mm sleeves Compatible with candy and eggbeater 11, 3, and 2
-

€54.99
Widen your Q-factor by 5mm to 57mm. Kit includes: 2x Long spindles 1x Refresh kit Compatible with eggbeater, candy, mallet, 5050, double shot from 2010-present.
-

€15.99
Traction pin kit for the Stamp, Mallet, Doubleshot and 5050 pedals. 8mm or 10mm anodized alloy pins, thread lock pre-applied 8mm is recommended for Mallet (3, E, DH, Trail) and Double Shot 3 10mm is recommended for Stamp 1 Gen 2, 2, 3, 7 & 11 flat pedals 40 pins included in each kit Neither…
-

€15.99
Traction pin kit for the Stamp, Mallet, Doubleshot and 5050 pedals. 8mm or 10mm anodized alloy pins, thread lock pre-applied 8mm is recommended for Mallet (3, E, DH, Trail) and Double Shot 3 10mm is recommended for Stamp 1 Gen 2, 2, 3, 7 & 11 flat pedals 40 pins included in each kit Neither…
-

€15.99
Traction pin kit for the Stamp, Mallet, Doubleshot and 5050 pedals. 8mm or 10mm anodized alloy pins, thread lock pre-applied 8mm is recommended for Mallet (3, E, DH, Trail) and Double Shot 3 10mm is recommended for Stamp 1 Gen 2, 2, 3, 7 & 11 flat pedals 40 pins included in each kit Neither…
-

€15.99
Traction pin kit for the Stamp, Mallet, Doubleshot and 5050 pedals. 8mm or 10mm anodized alloy pins, thread lock pre-applied 8mm is recommended for Mallet (3, E, DH, Trail) and Double Shot 3 10mm is recommended for Stamp 1 Gen 2, 2, 3, 7 & 11 flat pedals 40 pins included in each kit Neither…
-

€15.99
Traction pin kit for the Stamp, Mallet, Doubleshot and 5050 pedals. 8mm or 10mm anodized alloy pins, thread lock pre-applied 8mm is recommended for Mallet (3, E, DH, Trail) and Double Shot 3 10mm is recommended for Stamp 1 Gen 2, 2, 3, 7 & 11 flat pedals 40 pins included in each kit Neither…
-

€15.99
Traction pin kit for the Stamp, Mallet, Doubleshot and 5050 pedals. 8mm or 10mm anodized alloy pins, thread lock pre-applied 8mm is recommended for Mallet (3, E, DH, Trail) and Double Shot 3 10mm is recommended for Stamp 1 Gen 2, 2, 3, 7 & 11 flat pedals 40 pins included in each kit Neither…
-

€15.99
Traction pin kit for the Stamp, Mallet, Doubleshot and 5050 pedals. 8mm or 10mm anodized alloy pins, thread lock pre-applied 8mm is recommended for Mallet (3, E, DH, Trail) and Double Shot 3 10mm is recommended for Stamp 1 Gen 2, 2, 3, 7 & 11 flat pedals 40 pins included in each kit Neither…