UNIOR: Product features
material: premium flex plus carbon steel
Inner dimension: 9/16 x 20 TPI
Outer dimension: 5/8 x 24 TPI
Pedal thread inserts are used to replace damaged threads in cranks. They are used together with appropriate pedal taps and are available in 10 pcs sets.
UNIOR: Product features
material: premium flex plus carbon steel
1/2? square drive makes it easy to use with ratchets, fixed handles and torque wrenches
Compatible with:
Shimano Octalink® bottom brackets with outside notches, Bontrager ® and Truvativ ® ISIS Drive ® type bottom brackets
Bosch® Generation 3 and Generation 4 E-bike system front chainring lockring
UNIOR: Product features
material: premium flex plus carbon steel
For: Shimano®, ISIS®
How to use the tool:Use it together with the Unior 1/2" ratchet 190.1ABI
UNIOR: Product featuresShimano®, SRAM®, Sun Tour®, Chris King® and Sun Race® and others.How to use the tool:Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI
UNIOR: Product featuresFor: Shimano®, SRAM® and Sachs Aris®, Sun Race®How to use the tool:Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI
UNIOR: Product features
material: premium flex plus carbon steel
drop forged, entirely hardened and tempered
Surface finish: blacken
How to use the tool:The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.
UNIOR: Product features
reversible ratchet head
Torque appllication: one-way, but always apply in direction specified on torque wrench handle
ratchet operates in clockwise and anti-clockwise directions
for tightening on right hand threaded bolts and nuts
unmistakable signal when set torque is reached
Default value for the recalibration interval is 12 month of use, or approximately 5.000 cycles!
made according to standard ISO 6789
dual scaled, Nm and Kgm
Important!
Do not use torque wrench for untightening!
Torque tightens only in the direction showed on the key sticker! Sticker shows the proper direction of tightening!
The default calibration interval of the torque wrench is 12 months or 5.000 measurements from the date of end user purchase.
ALWAYS set the measuring mechanism to starting point, at the end of work.
When the requested torque is reached, please do not tight any more.
Torque wrench can be damaged, if manual instructions are not considered.
StandardsISO 6789
UNIOR: Product features
material: premium flex plus carbon steel
surface finish: chrome plated according to ISO 1456:2009
The hub cone wrenches are intended for the home mechanics or professional users. The extreme thin design with pen end jaw fit four popular sizes. These cone wrenches are used by every cyclist for quick repairs and daily maintenance of bicycles.
UNIOR: Product features
material: premium chrome vanadium steel
surface finish: chrome plated according to ISO 1456:2009
drop forged, entirely hardened and tempered
How to use the tool:Pedal wrench is intended for quick, simple end effective assembly and disassembly of the pedals. Extremely long and slim body as well as specially designed jaw enable perfect adaptability to the pedals. Higher speed and safety by screwing and unscrewing the pedals compared to the traditional open end wrench ensures comfortable working without damage. The pedal wrenches are available in three different dimensions: 15 x 15 for pedals, while 15 x 17 and 15 x 9/16" for hubs.
UNIOR: Product features
material: premium chrome vanadium steel
drop forged, entirely hardened and tempered
surface finish: chrome plated according to ISO 1456:2009
profile up to dimension 12x14 is 6 point, from 17x19 to 30x32 is 12 point
Usage:
In industry and repair shops specializing in hydraulic and pneumatic installations
This wrench helps working on joints where the use of standard ring wrench is impossible due to the nature of the job (ex. unions on steel cables, hydraulic and water pipes and on valves etc).
UNIOR: Product features
material: socket from premium flex chrome vanadium steel
material: bit from premium plus carbon steel
entirely hardened and tempered
made according to standard DIN 7422 (only metric dimension)
UNIOR: Product features
accuracy: 0,02mm/0,001"
function: measurement of internal dimensions, of external dimensions, of depth, of steps
made according to standard DIN 862
dual scale in inch and mm
UNIOR: Long lifespanThe wrenches are made of Premium chrome vanadium steel with a greater density at the points of the highest pressure, and such dimensioning and manufacture only increase their extreme power and durability.Safety cutWith their special safety cut, the wrenches prevent the damaging of corners and edges of the screws and nuts by distributing the force evenly over the surface away from the outer lines of the nut or screw head instead of directly on the edges.Innovative designState-of-the art design makes Unior wrenches guarantee an accurate and efficient transfer of force to screw heads and nuts. Features:
Material: Premium Chrome Vanadium Steel
Drop Forged, Entirely Hardened And Tempered
Surface Finish: Chrome Plated According To ISO 1456:2009
Polished Head
Ring Part With Life Profile
Advantages:
The Wrench Acts On The Flats To Protect The Corners Of The Nut
3 Drive Surface For Greater Power
100% Positioning Of The Wrench
Rewind Action Without Removing The Wrench
UNIOR: Product features
blade: premium hard chrome vanadium steel, entirely hardened and tempered
blade chrome plated, blackened tip
handle: ergonomic shape
three component material
hanging hole
UNIOR: Product features
material: premium plus carbon steel
drop forged, entirely hardened and tempered
cutting edges induction hardened
head polished
surface finish: chrome plated to standard ISO 1456:2009
heavy duty double - component handles
made according to standard EN 60900
Advantages:
the long bent jaws enable simple and precise clenching of nuts and screws
the strong jaws enable good grip
jaws bent to an angle of 45°
gripping surface serrated
UNIOR: Product features
material: premium plus carbon steel
drop forged, entirely hardened and tempered
cutting edges induction hardened
head polished
surface finish: chrome plated to standard ISO 1456:2009
heavy duty double - component handles
made according to standard ISO 5745 and EN 60900
Advantages:
also for clenching and separating of from cables and other sensitive objects
gripping surface serrated
UNIOR: Product features
material: premium plus carbon steel
drop forged, entirely hardened and tempered
head polished
surface finish: chrome plated to standard ISO 1456:2009
heavy duty double - component handles
gripping surface serrated
made according to standard ISO 5745 and EN 60900
UNIOR: Product features
material: premium plus carbon steel
drop forged, entirely hardened and tempered
cutting edges induction hardened
head polished
surface finish: chrome plated to standard ISO 1456:2009
heavy duty double - component handles
made according to standard ISO 5749 and EN 60900
UNIOR: Product features
material: premium plus carbon steel
drop forged, entirely hardened and tempered
cutting edges induction hardened
head polished
surface finish: chrome plated to standard ISO 1456:2009
heavy duty double - component handles
made according to standard ISO 5746 and EN 60900
UNIOR: Product features
material: premium chrome vanadium steel
handle - polypropylene
surface finishing: blade chrome plated according to ISO 1456:2009
UNIOR: One of our most popular tools, the ball-end T-handle hex is sure to impress. The black-oxide tipped shank, made of chrome-vanadium, is incredibly true-to-size unlike some other brands which are sloppy from the factory. That means fewer rounded out bolts and a more enjoyable experience. The polypropylene handle is comfortable to use and the perfect size: big enough to be useful, not so big that it makes the tool unwieldy. Available in multiple sizes.
