Enduro bearings are designed and built to last, but unfortunately sometimes some of the parts that surround them can still wear out. This light-contact silicone seal is the same outer seal that comes with Enduro bottom brackets for SRAM GXP cranksets that feature the custom MR 2237E extended race bearing to provide additional protection against the elements.
SE MR 21537 AL 6061
SE MR 2237N AL 6061
SE MR 2241N AL 6061
Cane Creek is taking its Hellbender line of bottom brackets to the next level with the all-new Hellbender 110.The Hellbender 110 BB provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls. We are so confident that this bottom bracket technology is the highest standard of quality that it has earned the right to be called 110 and includes the limited lifetime warranty that has become synonymous with the Cane Creek 110 name.HELLBENDER 110 BB Features:
MATERIALS: Machined Aluminium Cups
FINISH: Dual Stage Anodize Black and Gold
BEARINGS: Ultra premium, Enduro XD-15 ceramic, radial bearings with nitrogen infused, stainless steel races
SPINDLE DIAMETER: 30mm
WEIGHTS: BSA Threaded - 80g, BB30 - 93g, PF30 - 115g, T47 - 132g
WARRANTY: Limited Lifetime
Stainless Steel, Angular Contact, Bottom Bracket Bearing Kit for BB30 framesetsThis kit includes two 440C Stainless Steel, Angular-Contact bearings along with all of the necessary seals and spacers to complete a precise, professional installation.Enduro Angular Contact, 440C stainless steel balls and races provide long life and superior corrosion resistance in applications and environments that may be less than ideal. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash you bike often, or where sweat can be a problem. Enduro Bearings also uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements. Enduro stainless bearings all carry a full two-year anti-corrosion warranty.For the easiest removal and installation of this bearing kit, we recommend the BRT-040 bearing service tool. This tool allows you to quickly, remove and install bearings with a just few twists of the wrist.The Enduro line of bearings are available in High-Carbon Chromium Steel, 440C Stainless Steel, Ceramic-Hybrid and XD-15 with Ceramic or Stainless Balls. Our bearings are always engineered with deep groove races to accommodate the largest balls possible. All of our standard bearings feature dual-lip seals that ride in a micro groove creating a full labyrinth to provide ultimate protection against the elements.
ABEC-3 Bottom Bracket Bearing Kit for BB30 framesets (or any other BB standard with a 42mm OD bearing)Enduro's entry level BB bearing kit, though many steps up when compared to other products on the market, we couple our ABEC-3 radial bearings along with all of the necessary seals and spacers to complete a precise, professional installation. This kit should work for any bottom bracket that has 42mm OD bearings, including BB30, BB30A, PF30, PF30A, BBRight, and BB386.Engineered specifically for bicycle use, Enduro ABEC-3 bearings feature 52100 High-Carbon Chromium alloy races paired with grade 10 Balls, LLB seals and 90% fill high-pressure, water-proof grease. All Enduro radial bearings are engineered with deep grooves to accommodate the largest balls possible, providing maximum bearing contact area and greatly increased bearing life.For the easiest removal and installation of this bearing kit, we recommend the BRT-040 bearing service tool. This tool allows you to quickly remove and install bearings with a just few twists of the wrist while the BB is still in the bike.
Shell Fitment: BB30
Bearings: ABEC-3
Seal Type: LLB
Grease High Pressure, Waterproof Grease
Axle Size: 30mm or 29mm (DUB)
Warranty: 1 Year (against manufacturing defect)
Enduro Reference Number: 30mm - BK-54119 | 29mm - BK54116
XD-15 Ceramic-Hybrid, ABEC-5 Bottom Bracket Bearing Kit for BB30 framesets.Enduro's top of the line BB bearing kit, we couple our XD-15 Ceramic-Hybrid, ABEC-5 bearings along with all of the necessary seals and spacers to complete a precise, professional installation.An Enduro Bearings exclusive, our XD-15 Ceramic-Hybrid bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 3 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. 90% fill Kluber NBU52 grease only runs better and smoother with time and is highly resistant to being washed out. It is engineered to stick to the balls and continually be pulled back into the ball path where it is needed. The most impressive feature of XD-15 bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use.Find out why Bike Radar reported the XD-15 “Hands down, the best bottom bracket we have ever testedâ€. We are so sure that you will agree, that we offer an unlimited lifetime bearing and race warranty.For the easiest removal and installation of this bearing kit, we recommend the BRT-002 (EB8190) 30m x 42mm bearing tool. This tool allows you to quickly, remove and install bearings with a just few twists of the wrist.The Enduro line of bearings are available in High-Carbon Chromium Steel, 440C Stainless Steel, Ceramic-Hybrid and XD-15 with Ceramic or Stainless Balls. Our bearings are always engineered with deep groove races to accommodate the largest balls possible. All of our standard bearings feature dual-lip seals that ride in a micro groove creating a full labyrinth to provide ultimate protection against the elements.
Shell Fitment: BB30
Bearings: XD-15 Ceramic
Seal Type: LLB
Grease Kluber NBU52 Grease
Axle Size: 30mm or 29mm
Warranty: Limited Lifetime
Enduro Reference Number: 30mm - BKS-54121 | 29mm - BKC-54118
Press-In, Flanged, Double-Row, stainless steel angular contact bottom bracket solution for BB86/92 framesets.This press-in solution allows you to fit your BB30-style cranks directly into your BB86/92 frameset. It's a tight fit with the limiting factor of just 41mm inner diameter of the BB86/92 bottom bracket shell and it requires a special solution to accommodate for a 29mm or 30mm BB spindle. By utilizing flanged double-row bearings that press directly into the BB shell, we are able to maximize contact area by doubling the number of balls per side to provide a long lasting solution in a tight space.This complete bottom bracket features Flanged, Double-Row bearings with anti-corrosion Black Oxide/Magnetite treated, 52100 High-Carbon Chromium alloy races paired with grade 10 Balls. Black Oxide coating provides an extra level of corrosion resistance and extended worry free performance. Included with the kit are seals to protect the bearings from the elements and selection of spacers to allow you to precisely tune your chain-line.This is just one of the huge range of solutions that Enduro makes for the wide range of bottom bracket standards on the market today. Enduro offers a solution for just about any configuration at multiple price/performance levels, ranging from standard ABEC-3, up to XD-15 Ceramic Hybrid bearings featuring a lifetime guarantee.
Shell Fitment: BB86/92
Bearings: ABEC3 BO
Seal Type: LLB
Grease High Pressure, Waterproof Grease
Axle Size: 29mm or 30mm
Warranty: 1 Year (against manufacturing defect)
Enduro Reference Number: 29mm - BK7016 / 30mm - BK-7015
Press-In, Flanged, Double-Row, Black-Oxide treated Bottom Bracket solution for BB86/92 framesets.This press-in solution allows you to fit your BB30-style cranks directly into your BB86/92 frameset. It's a tight fit with the limiting factor of just 41mm inner diameter of the BB86/92 bottom bracket shell and it requires a special solution to accommodate for a 29mm or 30mm BB spindle. By utilizing flanged double-row bearings that press directly into the BB shell, we are able to maximize contact area by doubling the number of balls per side to provide a long lasting solution in a tight space.This complete bottom bracket features Flanged, Double-Row bearings with anti-corrosion Black Oxide/Magnetite treated, 52100 High-Carbon Chromium alloy races paired with grade 10 Balls. Black Oxide coating provides an extra level of corrosion resistance and extended worry free performance. Included with the kit are seals to protect the bearings from the elements and selection of spacers to allow you to precisely tune your chain-line.This is just one of the huge range of solutions that Enduro makes for the wide range of bottom bracket standards on the market today. Enduro offers a solution for just about any configuration at multiple price/performance levels, ranging from standard ABEC-3, up to XD-15 Ceramic Hybrid bearings featuring a lifetime guarantee.
Shell Fitment: BB86/92
Bearings: ABEC3 BO
Seal Type: LLB
Grease High Pressure, Waterproof Grease
Axle Size: 29mm or 30mm
Warranty: 1 Year (against manufacturing defect)
Enduro Reference Number: 29mm - BK7019 / 30mm - BK-7018
Press-In, Ceramic-Hybrid, XD-15, Flanged, Double-Row Bottom Bracket solution for BB86/92 framesets.This press-in solution allows you to fit your SRAM DUB cranks directly into your BB86/92 frameset. It's a tight fit with the limiting factor of just 41mm inner diameter of the BB86/92 bottom bracket shell and it requires a special solution to accommodate for a 29mm DUB or 30mm BB spindle (just 12mm). By utilizing flanged double-row bearings that press directly into the BB shell, we are able to maximize contact area by doubling the number of balls per side to provide a long lasting solution in an extremely tight space. This unique Enduro XD-15 Pro BB solution features XD-15 Ceramic-Hybrid cartridge bearings pressed directly into the BB shell, that feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. We are so sure that you will agree, that we offer an unlimited lifetime bearing and race warranty. The most impressive feature of these bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use, while the other ceramic-hybrid options will only get slower.Finding the right bottom bracket solution for the ever-growing range of bicycles on the market is not always an easy task. At Enduro we currently offer over 50 different types of bottom brackets for various bottom bracket shell and crankset combinations in multiple price/performance levels. Enduro bearings offers threaded options for BSA, BSA 30, Italian and the robust T47 system. For press-fit bottom brackets we created the oft-copied, thread-together Torqtite bottom brackets as well as press-fit Delrin Cup options. We even offer flanged, double-row bearings to fit 30mm cranksets in BB86 shells!
Shell Fitment: BB86/92
Bearings: XD-15 Ceramic
Seal Type: LLB
Grease Kluber NBU52 Grease
Axle Size: 29mm DUB or 30mm
Warranty: Unlimited Lifetime
Enduro Reference Number: 30mm - BKC-7021 / 29mm - BKC-7022
BK-5418 - ABEC-3 Bottom Bracket Bearing Kit for Shimano 24mm cranksets and Trek BB90/95 framesetsEnduro's entry level BB bearing kit, though many steps up when compared to other products on the market, we couple our ABEC-3 radial bearings along with all of the necessary seals and spacers to complete a precise, professional installation. This press-fit kit features an application-specific drive-side bearing with an extended inner race along with 22mm and 24mm outer seals to keep the elements out.Engineered specifically for bicycle use, Enduro ABEC-3 bearings feature 52100 High-Carbon Chromium alloy races paired with grade 10 Balls, LLB seals and 90% fill high-pressure, water-proof grease. All Enduro radial bearings are engineered with deep grooves to accommodate the largest balls possible, providing maximum bearing contact area and greatly increased bearing life.For the easiest removal and installation of this bearing kit, we recommend the BRT-003 24m x 37mm bearing tool. BRT-003 allows you to quickly remove and install bearings with a few twists of the wrist while the BB is still in the bike.
BKC-54109 - XD15 Ceramic-Hybrid, ABEC-5 Bottom Bracket Bearing Kit for Shimano 24mm cranksets and Trek BB90/95 framesetsEnduro's top of the line BB bearing kit, we couple our XD15 Ceramic-Hybrid, ABEC-5 bearings along with all of the necessary seals and spacers to complete a precise, professional installation.An Enduro Bearings exclusive, our XD15 Ceramic-Hybrid bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 5 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 5 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. 90% fill Kluber NBU52 grease only runs better and smoother with time and is highly resistant to being washed out. It is engineered to stick to the balls and continually be pulled back into the ball path where it is needed. The most impressive feature of XD15 bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use. We are so confident in the performance of XD15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion.Find out why Bike Radar reported the XD15 Hands down, the best bottom bracket we have ever tested. We are so sure that you will agree, that we offer an unlimited lifetime bearing and race warranty.For the easiest removal and installation of this bearing kit, we recommend the BRT-003 24m x 37mm bearing tool. BRT-003 allows you to quickly remove and install bearings with a few twists of the wrist.The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.
Stainless steel, Angular Contact, Bottom Bracket Bearing Kit for Trek BB90/95 framesetsThis kit includes two 440C stainless steel, Angular-Contact bearings along with all of the necessary seals and spacers to complete a precise, professional installation.Enduro Angular Contact, 440C stainless steel balls and races provide long life and superior corrosion resistance in applications and environments that may be less than ideal. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash your bike often, or where sweat can be a problem. Enduro Bearings also uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements. Enduro stainless bearings all carry a full two-year anti-corrosion warranty.For the easiest removal and installation of this bearing kit, we recommend the BRT-040 bearing tool. This allows you to quickly remove and install bearings with a few twists of the wristThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.
Shell Fitment: BB90/95
Bearings: 440C Stainless Steel AC
Seal Type: LLB
Grease CRC Marine Grease
Axle Size: 24mm or GXP
Warranty: 2 Years
Enduro Reference Number: 24mm BK-5419 | GXP BK-5417
BKC-54103 - XD-15 Ceramic-Hybrid, ABEC-5, Bottom Bracket Bearing Kit for Shimano 24mm x 37mm External Cup BBsEnduro's top of the line BB bearing kit, we couple our XD-15 Ceramic-Hybrid, ABEC-5 bearings along with all of the necessary seals and spacers to complete a precise, professional installation. An Enduro Bearings exclusive, our XD-15 Ceramic-Hybrid bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 3 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. 90% fill Kluber NBU52 grease only runs better and smoother with time and is highly resistant to being washed out. It is engineered to stick to the balls and continually be pulled back into the ball path where it is needed. The most impressive feature of XD-15 bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use.We are so sure that you will agree, that we offer an unlimited lifetime bearing and race warranty.For the easiest removal and installation of this bearing kit, we recommend the BRT-003 (eb9040) 24m x 37mm bearing tool. BRT-003 allows you to quickly remove and install bearings with a few twists of the wrist while the BB is still in the bike.
Shell Fitment: BSA
Bearings: XD-15 Ceramic
Seal Type: LLB
Grease Kluber NBU52 Grease
Axle Size: 24mm
Warranty: Unlimited Lifetime
Enduro Reference Number: BKS-54103
Italian Thread-In, Ceramic-Hybrid, XD-15, Angular Contact, Bearing Bottom Bracket for Italian-threaded framesets.Enduro's top of the line BB bearing kit, we couple our XD-15 Ceramic-Hybrid, ABEC-5 bearings along with all of the necessary seals and spacers to complete a precise, professional installation. An Enduro Bearings exclusive, our XD-15 Ceramic-Hybrid bearings combine c1orrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 3 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. 90% fill Kluber NBU52 grease only runs better and smoother with time and is highly resistant to being washed out. It is engineered to stick to the balls and continually be pulled back into the ball path where it is needed. The most impressive feature of XD-15 bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use. We are so sure that you will agree, that we offer an unlimited lifetime bearing and race warranty.Â
Shell Fitment: ITA
Bearings: XD-15 Ceramic
Seal Type: LLB
Grease Kluber NBU52 Grease
Axle Size: 24mm, 29mm or 30mm
Warranty: Unlimited Lifetime
Enduro Reference Number: 24mm - BKC-0811 / 29mm - BKC-0819 / 30mm - BKC-0808
MAXhit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MAXhit bottom bracket bearings are designed to thread directly into your bicycles bottom bracket shell, eliminating the need for the aluminium cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard BB bearings. The kit includes a full selection seals and spacers to ensure proper installation in any BSA threaded bike.Machined entirely from 440C stainless steel and guaranteed for life, Maxhit BB bearings include proprietary double-lip labyrinth seals and Enduro's extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance.The Enduro line of BB bearings begin with chromium steel, Black Oxide finish A/C type and then offer full 440C stainless steel at the top. They are always engineered with the largest balls possible and dual lip seals riding in a micro-groove for ultimate protection against sweat and the elements. They are filled 90% with high pressure water proof grease, so you never have to guess if there is grease inside. Enduro Angular Contact (A/C) bearings, all balls are engaged to spread the force over a larger surface area, pressure water and minimizing wear.
Shell Fitment: BB86/92
Bearings: 440C Stainless Steel AC
Seal Type: LLB
Grease CRC Marine Grease
Axle Size: 24mm
Warranty: Limited Lifetime
Enduro Reference Number: BKSM-8122
MAXhit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MAXhit bottom bracket bearings are designed to thread directly into your bicycles bottom bracket shell, eliminating the need for the aluminium cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard BB bearings. The kit includes a full selection seals and spacers to ensure proper installation in any BSA threaded bike.Machined entirely from 440C stainless steel and guaranteed for life, Maxhit BB bearings include proprietary double-lip labyrinth seals and Enduro's extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance.We are so confident in performance and longevity of this new innovation that we offer a full LIFETIME warranty that also covers corrosion.The Enduro line of BB bearings begin with chromium steel, Black Oxide finish A/C type and then offer full 440C stainless steel at the top. They are always engineered with the largest balls possible and dual lip seals riding in a micro-groove for ultimate protection against sweat and the elements. They are filled 90% with high pressure water proof grease, so you never have to guess if there is grease inside. Enduro Angular Contact (A/C) bearings, all balls are engaged to spread the force over a larger surface area, pressure water and minimizing wear.
Shell Fitment: BSA
Bearings: 440C Stainless Steel AC
Seal Type: LLB
Grease CRC Marine Grease
Axle Size: 24, 30mm. DUB
Warranty: Limited Lifetime
Enduro Reference Numbers:Â
24mm - BKSM-8112
30mm - BKSM-8142
DUB - BKSM-8132
T47 Threaded, Stainless Steel, Angular Contact Bearing Bottom Bracket for T47 Framesets. Angular Contact Stainless Steel bearings pressed into precision machined aluminium T47 cups that simply thread directly into the BB shell. All Enduro bottom brackets are manufactured to the highest standards at the Enduro Bearings production facility in California, USA. This complete bottom bracket features Angular Contact, 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash you bike often, or where sweat can be a problem. Enduro Bearings also uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements. We are so confident in the quality and performance of theses bearings, Enduro provides a three year anti-corrosion guarantee. Finding the right bottom bracket solution for the ever-growing range of bicycles on the market is not always an easy task. At Enduro we currently offer over 50 different types of bottom brackets for various bottom bracket shell and crankset combinations in multiple price/performance levels. Enduro bearings offers threaded options for BSA, BSA 30, Italian and the robust T47 system. For press-fit bottom brackets we created the oft-copied, thread-together Torqtite bottom brackets as well as press-fit Delrin Cup options. We even offer flanged, double-row bearings to fit 30mm cranksets in BB86 shells.
Shell Fitment: BB30
Bearings: 440C Stainless Steel
Seal Type: LLB
Grease Kluber CRC Marine Grease
Axle Size: 24mm, 29mm (DUB), 30mm
Warranty: 2 year
Enduro Reference Number:24mm - BKS0231 / 29mm (DUB) - BKS-0226 / 30mm -BKS0211
T47-External, Threaded, Ceramic Hybrid, XD-15, Angular Contact Bearing, Bottom Bracket for T47 FramesetsAn Enduro Bearings exclusive, our XD-15 Pro BBs feature XD-15 15 Angular Contact cartridge bearings pressed into precision machined aluminum T47 cups that simply thread directly into the BB shell. Utilizing the same XD-15 steel as our XD-15 Corsa bearing, Enduro XD-15 Pro bearings offer a 15 angular contact sealed bearing in a standard-sized cartridge. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. Enduro XD-15 bottom brackets are manufactured to the highest standards at the Enduro Bearings production facility in California, USA. Enduro XD-15 bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 3 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup.We are so confident in XD-15, that we offer an unlimited lifetime bearing and race warranty. The most impressive feature of these bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use, while the other ceramic-hybrid options will only get slower.
Shell Fitment: T47
Bearings: XD15 Pro
Seal Type: LLB
Grease Kluber CRC Marine Grease
Axle Size: 24mm, 29MM (DUB), 30mm
Warranty: Limited Lifetime
Enduro Reference Number: 24mm - BKC-0779 / 29mm (DUB) - BKC-0771 / 30mm - BKC-0776
T47 Threaded, Stainless Steel, Angular Contact Bearing Bottom Bracket for 86mm Shell, T47 Framesets.Angular Contact Stainless Steel bearings pressed into precision machined aluminum T47 cups that simply thread directly into the BB shell. All Enduro bottom brackets are manufactured to the highest standards at the Enduro Bearings production facility in California, USA.This complete bottom bracket features Angular Contact, 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash you bike often, or where sweat can be a problem. Enduro Bearings also uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements. We are so confident in the quality and performance of theses bearings, Enduro provides a three year anti-corrosion guarantee.#
Shell Fitment: T47 Internal Bearing
Bearings: 440C Stainless Steel
Seal Type: LLB
Grease Kluber CRC Marine Grease
Axle Size: 24mm, 29mm (DUB), 30mm
Warranty: 2 year
Enduro Reference Number: 24mm - BKS-0246 / 29mm (DUB) - BKS0249 / 30mm BKS-0241
T47-Threaded, Ceramic Hybrid, XD-15, Angular Contact Bearing, Bottom Bracket for T47 Framesets.Enduro's top of the line BB bearing kit, we couple our XD-15 Ceramic-Hybrid, ABEC-5 bearings along with all of the necessary seals and spacers to complete a precise, professional installation. An Enduro Bearings exclusive, our XD-15 Ceramic-Hybrid bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 3 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. 90% fill Kluber NBU52 grease only runs better and smoother with time and is highly resistant to being washed out. It is engineered to stick to the balls and continually be pulled back into the ball path where it is needed. The most impressive feature of XD-15 bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use.We are so sure that you will agree, that we offer an unlimited lifetime bearing and race warranty.
Shell Fitment: T47 Internal Bearing
Bearings: XD-15 Ceramic
Seal Type: LLB
Grease Kluber NBU52 Grease
Axle Size: 24mm, 29MM (DUB), 30mm
Warranty: Unlimited Lifetime
Enduro Reference Number: 24mm - BKC-0796 / 29mm (DUB) - BKC-0799 / 30mm - BKC-0791
TorqTite, Stainless Steel, Angular Contact, Bearing Bottom Bracket for BB30 Framesets. An original Enduro innovation, the TorqTite BB solution utilizes Angular Contact Stainless Steel bearings pressed into precision machined aluminum TorqTite cups that simply thread together in the BB shell for a simple, secure, creak-free installation in any non-threaded BB shell. All Enduro bottom brackets are manufactured to the highest standards at the Enduro Bearings production facility in California, USA. This complete bottom bracket features Angular Contact, 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash you bike often, or where sweat can be a problem. Enduro Bearings also uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements. We are so confident in the quality and performance of theses bearings, Enduro provides a three year anti-corrosion guarantee.Â
Shell Fitment: BB30
Bearings: 440C Stainless Steel
Seal Type: LLB
Grease Kluber CRC Marine Grease
Axle Size: 24mm, 29mm (DUB) or 30mm
Warranty: 2 year
Enduro Reference Number: 24mm - BKS-0151 / 29mm DUB - BKS-0181 / 30mm -BKS-0159
TorqTite, Ceramic-Hybrid, XD-15, Angular Contact, Bearing Bottom Bracket for BB30 FramesetsAn Enduro Bearings exclusive, our XD-15 Pro BBs feature XD-15 15° Angular Contact cartridge bearings pressed into precision machined aluminum cups that simply thread directly into the BB shell. Utilizing the same XD-15 steel as our XD-15 Corsa bearing, Enduro XD-15 Pro bearings offer a 15º angular contact sealed bearing in a standard-sized cartridge. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. Enduro XD-15 bottom brackets are manufactured to the highest standards at the Enduro Bearings production facility in California, USA. Enduoro XD-15 bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 3 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. We are so sure that you will agree, that we offer an unlimited lifetime bearing and race warranty. The most impressive feature of these bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use, while the other ceramic-hybrid options will only get slower.Â
Shell Fitment: BB30
Bearings: XD-15 Ceramic
Seal Type: LLB
Grease Kluber NBU52 Grease
Axle Size: 24mm or 30mm
Warranty: Unlimited Lifetime
Enduro Reference Number: 24mm - BKC-0881 / 30mm - BKC-0846
BKS-0146 - TorqTite, Stainless Steel, Angular Contact, Bearing Bottom Bracket for BB30A Framesets and Shimano 24mm Cranksets. An original Enduro innovation, the TorqTite BB solution utilizes Angular Contact Stainless Steel bearings pressed into precision machined aluminum TorqTite cups that simply thread together in the BB shell for a simple, secure, creak-free installation in any non-threaded BB shell. All Enduro bottom brackets are manufactured to the highest standards at the Enduro Bearings production facility in California, USA. This complete bottom bracket features Angular Contact, 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash you bike often, or where sweat can be a problem. Enduro Bearings also uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements. We are so confident in the quality and performance of theses bearings, Enduro provides a three year anti-corrosion guarantee. Finding the right bottom bracket solution for the ever-growing range of bicycles on the market is not always an easy task. At Enduro we currently offer over 50 different types of bottom brackets for various bottom bracket shell and crankset combinations in multiple price/performance levels. Enduro bearings offers threaded options for BSA, BSA 30, Italian and the robust T47 system. For press-fit bottom brackets we created the oft-copied, thread-together Torqtite bottom brackets as well as press-fit Delrin Cup options. We even offer flanged, double-row bearings to fit 30mm cranksets in BB86 shells!
Shell Fitment: BB30A
Bearings: 440C Stainless Steel
Seal Type: LLB
Grease Kluber CRC Marine Grease
Axle Size: 24mm
Warranty: 2 year
Enduro Reference Number: BKS-0146
