UNIOR: Product features
blade: premium hard chrome vanadium steel, entirely hardened and tempered
blade chrome plated, blackened tip
handle: ergonomic shape
three component material
hanging hole
UNIOR: Product features
heavy duty and durable cabinet construction
cabinet dimensions: L1221 × W700 × H1304 mm
6 drawers: 2 in size L1106 × W596 × H72 mm with capacity 90 kg and 4 in size L1106 × W596 × H198 mm with capacity 180 kg
total drawer volume: 522 liters
100% extension drawers with high quality ball bearing slides
central locking system with a lock and folding key
block safety system prevents simultaneous opening of more than one drawer. When one drawer is opened, all other drawers are locked and cannot be opened, which prevents drawer from tipping over.
customization – divide drawers with the use of partitions and dividers according to your needs
made of premium PLUS sheet metal
painted with eco colors of Qualicoat quality standard
UNIOR: Comprised of two separate cabinets that, when combined, stand over 2m tall, the 949 is a great storage solution for those bigger tools and parts that you don't use every day but still want to keep organized.The lower cabinet has 7 drawers while the upper cabinet has two adjustable shelves. When stacked the units stand 2030mm high, 695mm wide, and 660mm deep. They weigh 135kg together, so make sure you've got a good floor.The 7 drawers in the lower cabinet ride on ball bearing slides for smooth operation no matter how much you put in them. The cabinets are lockable as well to keep sticky fingers away. Product features
material: premium PLUS sheet metal
locking with keylock and folding key
lock with key included also foam keyring
coated with eco colour of Qualicoat quality standard
the interior of the cabinet is fitted with perforated steel plate
Length - 700
Width - 300
Height - 900
Weight - 26000
UNIOR: Product features
material: premium PLUS sheet metal
central locking system with a lock and folding key
lock with key included also foam keyring
oil and acid resistant casters of a diameter of 100 mm, one with brake, which blocks spinning and swiveling of the caster
full extension drawers with top quality ball-bearing slides
the synthetic covering protects drawers and tools from damage
wide range of accessories
coated with eco colour of Qualicoat quality standard
7 drawers (5 x L 560 x W 365 x H 70 mm, 2 x L 560 x W 400 x H 150 mm)
basic dimensions with handle and casters L 760 x W 440 x H 895 mm
total volume of drawers: 140 litres
static load capacity of carriage without casters: 1600kg
dynamic load capacity of carriages: 300 kg
maximum capacity of each drawer: 45kg
left and right side are perforated
include 10 hooks dimension 50mm
ABS plate on the top of the carriage
drawers compatible with SOS tool trays 1/3, 2/3, 3/3
Width - 448
Length - 770
Height - 895
Weight - 52000
UNIOR: Product features
material: premium PLUS sheet metal
central locking system with a lock and folding key
lock with key included also foam keyring
oil and acid resistant casters of a diameter of 125mm, one with brake, which blocks spinning and swiveling of the caster
full extension drawers with top quality ball-bearing slides
opening and closing of drawers is very simple due to the uniform solution - drawer handle on the upper side enables users a synchronic grip and opening of a carriage drawer.
drawers with non-slip interior synthetic lining
coated with eco colour of Qualicoat quality standard
7 front drawers (5x L 563 x W 365 x H 70mm, 2x L 563 x W 383 x H 150mm)
basic dimensions with handle and casters L 1182 x W 640 x H 955 mm
total volume of drawers: 133 litres
door with lock
wooden worktop
static load capacity of carriages without casters: 2300 kg
dynamic load capacity of carriages: 550 kg
capacity of front drawers: 45 kg
drawers compatible with SOS tool trays 1/3, 2/3, 3/3
Advantages:
Perforated wall on the back side of the tool carriage allows hanging tools with tool hooks
As an accessories available also a spray holder for easy storage of sprays up to dia. 68mm, and a back door with a lock
Width - 640
Length - 1182
Height - 955
Weight - 96200
UNIOR: Product features
Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. Locking mechanism keeps pliers closed for the easier storing. To unlock the locking mechanism simply squeeze and release the pliers.
In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.
UNIOR: Product features
Torque wrench specially designed for work on bikes. Both versions in a size to best fit the intended use, precise and easy to use. Smaller version features a ¼? square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features ½? square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors.
antislip handle
target torque warning: buzzer + 2 LED lights
operation mode: peak hold / track
unit selection: N-m, in-lb, ft-lb, kg-cm
gear teth: 60
battery: 1×AAA (not included), compatible with rechargeable battery
warranty: 10.000 cycle / one year
auto power off after 5 min
UNIOR: Product features
Bench or wall mount option.
Intended for professional and home workshops.
Clamp can grip tubes of any shape, with diameter of minimum Ø22mm to maximum Ø60mm.
Easy accessible screw enables us, to modify the jaw opening and pressure when closed. The screw can be turned with hand, without use of any wrench.
Code 623225 article 1693.2S is wall and bench jaw with adjustable nut
UNIOR: Product features
Repair bike stand with fixed plate and two clamps is designed for service workshops and more demanding users.
Stand enables work for two mechanics at the same time on two bikes.
The new plastic cup enables storage of tools and spare parts.
Fixed plate is ergonomically designed. Maximum load capacity is 45kg, which enables to service heavier bikes.
Stand is adjustable by height between 947 and 1570 mm.
Weight of the stand is 56,5kg.
Additional accesories - paper roll holder.
Clamp can grip tubes of any shape, with diameter of minimum Ø22mm to maximum Ø60mm.
Replaceable rubber jaw covers, item 1693.11
Code 623228 article 1693C1 is stand with two jaws with spring and without fixed plate
Code 623224 article 1693CS is stand with fixed plate and two jaws with adjustable nut
Code 623229 article 1693CS1 is stand with two jaws with adjustable nut and without fixed plate
Code 623230 article 1693CS2 is stand with two jaws(with spring and adjustable nut) and without fixed plate
Repair bike stand 1693C1,1693CS1 in 1693CS2 is designed for floor or ceiling mount.
UNIOR: Product features
Repair bike stand with fixed plate is designed for service workshops and every day use.
Fixed plate is ergonomically designed. Maximum load capacity is 30kg, which enables the servicing of heavier bikes.
Clamp can grip tubes of any shape, with diameter of minimum Ø22mm to maximum Ø60mm.
Stand is adjustable by height between 947 and 1570 mm.
weight of the stand is 36kg
Replaceable rubber jaw covers, item 1693.11
Code 623226 article 1693B1 is stand with jaw with spring and without fixed plate
Code 623223 article 1693BS is stand with fixed plate and jaw with adjustable nut
Code 623227 article 1693BS1 is stand with jaw with adjustable nut and without fixed plate
Repair bike stand 1693B1 and 1693BS1 is designed for floor or ceiling mount.
UNIOR: Product features
Pedal Genie is used as a substitute for pedals while adjusting derailleurs on a bicycle without pedals. It’s especially useful for building new bikes that usually come without pedals.
The tool features a strong double injected handle, which enables comfortable and efficient grip.
The Pedal Genie comes with two adaptors that offer two different ways of use. Threaded version for more efficient work and a conical version for quick checks.
Threaded part is designed to work on the drive-side crank only (9/16" x 20 tpi thread).
UNIOR: Product features
Fork seal driver tool is specially designed for dust seal installation on the suspension forks. The drivers are designed to use the forks bushing as a guide, eliminating crocked seal installation, and ensuring perfect fit of the seal. The tool is made from reinforced plastic and does not damage the seal or the fork housing during the installation. Available in different sizes, each of them corresponding to specific stanchion diameter, and is compatible with both flangeless and flanged seals, making them compatible with most modern forks.
Better compatibility is the biggest virtue of the newest version of this tool, but it also has laser engraved logos & spec, which will stay clearly visible for extended period of time.
