Sram: Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service.*** TO BE USED WITH ZPCM8048000 & ZPCM8048001 ***SPECIFICATIONSSpares Category: MOUNT KIT
Zipp: OVERVIEWZipp’s QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes, system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. The Zipp QuickView Integrated mount will have two variants, one compatible with Service Course, Service Course SL, and SL Speed models, and another designed for use with the SL Sprint. This is an easy way to add elegant integration to your road bike.FEATURES
Computer compatibility: Garmin™, HammerHead™, Wahoo™
Accessory compatibility: GoPro™
Lights: Niterider Lumina Series™ (with adapter), Light and Motion™, Bontrager™ (with adapter), Gloworm™ (with adapter), Lezyne™ (with adapter), Infini™ (with adapter), Sigma Sport™
Lifetime warranty
SPECIFICATIONSComputer Mount Type Road/MTB
Zipp: Securely place vital ride info where you need it for triathlon or time trials with this uncomplicated computer mount for aero-bar extensions that is easy to install, lightweight and above all vibration and slip free.The 22.3mm industry standard quarter-twist mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. Comes with single Torx T25 bolt, flexible mounting clamp and one quarter twist mount.
Sram: The SRAM QuickView MTB Computer Mount features an all-new design optimized for off-road use while retaining the simple and secure 1/4 turn twist mount interface. An all-new clamp design splits the clamp with top access to the pinch bolt (T25 stainless).The mounting platform positions the cycling computer up and directly behind the MTB bar and stem face plate to better protect the computer when riding on rough terrain.
Sram: The new SRAM QuickView Computer Mount Adaptor features a slide interface on one side, and a quarter-turn twist on the other, to conveniently attach a Garmin Edge 605 or 705 computer to any SRAM QuickView Computer Mount.Easy to install, light, secure and durable. The all-new SRAM Quickview Adaptor makes slick work of attaching your sliding head unit interface to any of SRAMs quarter-turn Quickview Mounts.
Sram: SRAM delivers an uncomplicated computer mount thats easy to install, lightweight, and above all, vibration and slip-free.At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4 twist mount, it installs quickly, simply and securely on any 31.8mm bar surface.The SRAM QuickView Computer Mount also features a center-offset design so the computer can be placed directly in front of the stem, or flip it to position the computer before the bar for MTB or CycloCross use.Works great with your Quarq power meter!
Optimised for road drop bars
Compatible with Garmin computers with Quarter-turn bike mount interface and 31.8mm bar surface
Sturdy, slip-free, vibration-free
SKS: Angle-adjustable mobile phone holder for the handlebars One for all: The COMPIT mobile phone holder can be easily mounted on different bicycle handlebars. In addition to clamping arms, the complete set with accompanying spacers also offers the option of attaching the mobile phone holder to e-bikes with centre displays, so that the smartphone and on-board computer form a closed unit on the handlebar.A secure hold with just a twistWith a single twist, the smartphone can be mounted horizontally or vertically on the bayonet mount and removed again just as quickly. In addition, it can be moved to the desired position with the angle adjustment. The COMPIT holds the mobile phone firmly and securely, even on rough terrain.Note: A special smartphone cover/bag is required! Only compatible for Bosch Nyon until 2020.
Suitable for all bikes
Bayonet fastening
Horizontal and vertical mounting
Adjustable angle
With a spacer for different mounting options
Made in Germany
SKS: Mobile phone holder for universal use Simple, fast and universal: With a robust hook and loop fastener and two locking rings, the COMPIT ANYWHERE mobile phone holder can be mounted securely on the handlebars, stem or top tube. The system can also be easily attached to buggies and removed again. The 30 cm long, rubberised hook and loop fastener ensures a perfect hold; the locking rings are slip-resistant and protect the surface.Mounting with hook and loop fastenersThanks to the tilt adjustment, the position of the mobile phone can be optimally adjusted to ensure good readability from any angle. Note: A special smartphone cover/bag is required!
For mounting on the handlebars, stem or top tube
Bayonet fastening
Horizontal and vertical mounting
Adjustable angle
Mounting with hook and loop fasteners and locking rings
Made in Germany
SKS: Water-repellend mobile phone case for the bike handlebars For mounting on a COMPIT mobile phone holder systemEverything in view - in any weather: the COM/SMARTBAG smartphone case can be mounted on any COMPIT mobile phone holder thanks to the adapter. A special COMPIT cover is therefore not needed. The large transparent window ensures easy use of the touch screen and the mobile phone can also be unlocked with the touch of a finger directly through the transparent film. The extra pocket underneath not only offers additional space for keys and money, but also for the COM/UNIT power bank for inductive charging of the mobile phone whilst out cycling. Strong vibrations can cause the inductive charging function to be interrupted. On rough terrain it is therefore advisable to charge the mobile phone with a cable. It is also optional to attach the COM/UNIT directly to the COMPIT smartphone holder under the SMARTBAG. In this case, the mobile phone must be charged with the cable fed through the cable duct. Suitable for smartphones with maximum dimensions of 155 x 80 x 15 mm.
Only compatible with the COMPIT system
Extra storage space
Water-repellend fabric
Can be used through the transparent film
For all common smartphones
SPECIFICATIONSWeight | 115 gMaterial | Waterrepellent
SKS: INTEGRATED · MINIMALISTIC · SIMPLE The COMPIT STEM mobile phone holder for the mounting stem holds your mobile phone firmly and securely in place, even in tough off-road conditions. The high-quality smartphone holder is mounted below the existing head cap on the handlebar stem. Thanks to the bayonet mount, the mobile phone can be mounted quickly and easily with a single twist – in either direction. This means that the cockpit stays clean and the handlebar remains free. The mobile phone holder with its stem mounting also provides an ideal solution for using the COMPIT system for electric mountain bikes with 35 mm handlebar clamps as well.NOTE! smartphone cover required. SPECIFICATIONS
Can be integrated unobtrusively into the cockpit
High stability
Minimalist design
Mobile phone holder with bayonet mount
Head set | Ø 1 1/8 inches
For ahead stems
SKS: Self-adhesive universal adapter for hard covers Ensures maximum hold thanks to the 3M filmIf a hard cover is already available or no suitable case is available for the mobile phone, the universal cover is another way to securely mount the smartphone on the COMPIT or the +COM/UNIT. The adapter made of robust plastic is affixed to the existing hard cover using a self-adhesive 3M film. The adhesive film ensures maximum hold. The smartphone can then be docked onto the system by pushing it on and turning it over the oversized bayonet mount. With an alcohol pre-pad for degreasing the surface.
Suitable for all mobile phone covers
Made of wear-resistant plastic
Includes self-adhesive 3M film
With a mounting device
SPECIFICATIONSMeasurements | 60 x 60 x 4 mm
SKS: Smartphone cover with a mounting device Made of shock-absorbing 2-component plasticIn order to secure the smartphone to the COMPIT or the +COM/UNIT, it must be equipped with a suitable COMPIT COVER. The smartphone cover with a special mounting device makes it possible to dock the smartphone onto the system by pushing it on and turning it over the oversized bayonet mount.The shock-absorbing materials that the cover is made of enclose the outer edges of the smartphone and protect it in the event of impact. The cover is particularly robust at the points of maximum stress through the use of high-quality, wear-resistant plastic. The 2-component cover that is pleasant to the touch can be easily attached to and removed from the smartphone. Including a practical hand strap.
Made of wear-resistant 2-component plastic
With a mounting device
Shock-absorbing
Pleasant to the touch
Including a practical hand strap
Rixen-Kaul: Map holder with swivel coupling for quick rotation from horizontal to vertical position. Sturdy transparent rain cover.Includes KLICKfix Mini Adapter for easy mounting on handlebar or stem.
Rixen-Kaul: Plexiglass map holder suitable for most map sizes. Easy to remove, by pressing the red button, thanks to quick release system.Includes KLICKfix Mini Adapter for easy mounting on handlebar or stem.
Minoura: ‘If you need space for that extra set of lights, then there isn’t anything better’ Road CC. If you need extra cockpit space for lights or computers, the new Minoura SG 400 Space Grips are now sleeker and more secure than ever. Now with a stronger clamping mechanism that can stay attached to the bike, the Space Grip SG400 also has a sleek finish that enhances your handlebar space. Space Grips are so popular because they are so versatile!
Minoura: New CS-500 HeadSet Accessory MountAll new head set mounted accessory holder features: -Strong but light Aluminimum body-50mm bar width / 25.4 mm diameter-120 mm extension from headset centre.-10mm spacer depth-For use above or below the stem
