Zipp: Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. Information contained on SRAM Connect is subject to change at any time without prior notice. Spokes And Nipples 3-Pack 258Mm Cx-Ray J-Bend Tcx External Black
Zipp: Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. Information contained on SRAM Connect is subject to change at any time without prior notice. Spokes And Nipples 3-Pack 260Mm Cx-Sprint J-Bend Tcx External Black
Sram: AM ZIPP VALVE ASSEMBLY FOR ZIPP AIR SENSOR QTY1 - ZIPP 303SW A1 AND 353NSW B1 - INCLUDING 2 EXTRA D-RINGS Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. Information contained on SRAM Connect is subject to change at any time without prior notice.
Zipp: Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service.
Zipp: OVERVIEWZipp’s 76/176 hubset is dependable and durable, with a big speed capacity. The 76/176 features three pawls and 36 points of engagement. This hubset uses contact seals for outside the bearings, which is exposed to the elements, and non-contact seals for inside of the bearings to reduce drag. That combination provides a balance of speed and durability.FEATURES
Better bearing seals for increased durability
3-pawl design, 36 points of engagement
Same bearing size as premium-level Zipp hubs
Disc-brake hub with Center-locking rotor interface. The lock ring is included
Disc-brake only
Through-axle compatible: Front: 12x100 - Rear 12x142 (end caps for QR available separately)
Designed for j-bend spokes, 24 holes
XDR or SRAM / Shimano driver body options
SPECIFICATIONSOrientation FrontAxle type TA 12x100Spoke holes 24Brake compatibility Disc (Center Lock)Colour (hub) BlackAxle material Aluminum front & rearAxle Convertible - NoHub shell - Aluminum Hi/Lo flangesOLD 100mmBearings Cartridge - Stainless SteelPower Measurement Not Compatible
Zipp: OVERVIEWZipp’s 76/176 hubset is dependable and durable, with a big speed capacity. The 76/176 features three pawls and 36 points of engagement. This hubset uses contact seals for outside the bearings, which is exposed to the elements, and non-contact seals for inside of the bearings to reduce drag. That combination provides a balance of speed and durability.FEATURES
Better bearing seals for increased durability
3-pawl design, 36 points of engagement
Same bearing size as premium-level Zipp hubs
Disc-brake hub with Center-locking rotor interface. The lock ring is included
Disc-brake only
Through-axle compatible: Front: 12x100 - Rear 12x142 (end caps for QR available separately)
Designed for j-bend spokes, 24 holes
XDR or SRAM / Shimano driver body options
SPECIFICATIONSOrientation RearAxle type TA 12x142Spoke holes 24Brake compatibility Disc (Center Lock)Driver body type SRAM XDROver Locknut Material n/aColour (hub) BlackDriver Mechanism 3 Pawls Leaf SpringAxle material Aluminum front & rearAxle - Convertible NoDriver body material AluminumHub shell Aluminum - Hi/Lo flangesOLD 142mmBearings Cartridge - Stainless SteelPower Measurement Not Compatible
Zipp: OVERVIEWZipp’s 76/176 hubset is dependable and durable, with a big speed capacity. The 76/176 features three pawls and 36 points of engagement. This hubset uses contact seals for outside the bearings, which is exposed to the elements, and non-contact seals for inside of the bearings to reduce drag. That combination provides a balance of speed and durability.FEATURES
Better bearing seals for increased durability
3-pawl design, 36 points of engagement
Same bearing size as premium-level Zipp hubs
Disc-brake hub with Center-locking rotor interface. The lock ring is included
Disc-brake only
Through-axle compatible: Front: 12x100 - Rear 12x142 (end caps for QR available separately)
Designed for j-bend spokes, 24 holes
XDR or SRAM / Shimano driver body options
SPECIFICATIONSOrientation RearAxle type TA 12x142Spoke holes 24Brake compatibility Disc (Center Lock)Driver body type SRAM/Shimano RoadOver Locknut Material n/aColour (hub) BlackDriver Mechanism 3 Pawls Leaf SpringAxle material Aluminum front & rearAxle - Convertible NoDriver body material Aluminum front & rearHub shell Aluminum - Hi/Lo flangesOLD 142mmBearings Cartridge - Stainless SteelPower Measurement Not Compatible
Zipp: In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM’s development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc and rim-brake wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp’s Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. At any time, there are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace.FEATURES
Better sealing, increasing durability over previous hub model
Quick engagement for a responsive ride
Light weight
Same bearing size and caps as premium-level Cognition hub
e-bike certified
Disc brake hub with Center locking rotor interface. The lock ring is included
Disc and rim brake variants
Through axles or QR with removable end caps
XDR or SRAM / Shimano variants
Lifetime Warranty
SPECIFICATIONSOrientation: FrontAxle type: TA 12x100Spoke holes: 24Brake compatibility: Disc (Center Lock)Driver body type: n/aOver Locknut Material: n/aColor (hub): BlackDriver Mechanism: n/aAxle material: Aluminum front & rearAxle - Convertible: NoDriver body material: n/aHub shell: Aluminum – Angled flanges – Fully machinedOLD: 100mmBearings: Cartridge - SteelPower Measurement: Not Compatible
Zipp: In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM’s development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc and rim-brake wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp’s Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. At any time, there are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace.FEATURES
Better sealing, increasing durability over previous hub model
Quick engagement for a responsive ride
Light weight
Same bearing size and caps as premium-level Cognition hub
e-bike certified
Disc brake hub with Center locking rotor interface. The lock ring is included
Disc and rim brake variants
Through axles or QR with removable end caps
XDR or SRAM / Shimano variants
Lifetime Warranty
SPECIFICATIONSOrientation: FrontAxle type: TA 12x100Spoke holes: 28Brake compatibility: Disc (Center Lock)Driver body type: n/aOver Locknut Material: n/aColor (hub): BlackDriver Mechanism: n/aAxle material: Aluminum front & rearAxle - Convertible: NoDriver body material: n/aHub shell: Aluminum – Angled flanges – Fully machinedOLD: 100mmBearings: Cartridge - SteelPower Measurement: Not Compatible
Zipp: In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM’s development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc and rim-brake wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp’s Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. At any time, there are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace.FEATURES
Better sealing, increasing durability over previous hub model
Quick engagement for a responsive ride
Light weight
Same bearing size and caps as premium-level Cognition hub
e-bike certified
Disc brake hub with Center locking rotor interface. The lock ring is included
Disc and rim brake variants
Through axles or QR with removable end caps
XDR or SRAM / Shimano variants
Lifetime Warranty
SPECIFICATIONSOrientation: RearAxle type: TA 12x142Spoke holes: 24Brake compatibility: Disc (Center Lock)Driver body type: SRAM XDROver Locknut Material: n/aColor (hub): BlackDriver Mechanism: 12 Pawls Leaf Spring, 132 POEAxle material: Aluminum front & rearAxle - Convertible: NoDriver body material: AluminumHub shell: Aluminum – Angled flanges – Fully machinedOLD: 142mmBearings: Cartridge - SteelPower Measurement: Not Compatible
Zipp: In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM’s development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc and rim-brake wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp’s Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. At any time, there are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace.FEATURES
Better sealing, increasing durability over previous hub model
Quick engagement for a responsive ride
Light weight
Same bearing size and caps as premium-level Cognition hub
e-bike certified
Disc brake hub with Center locking rotor interface. The lock ring is included
Disc and rim brake variants
Through axles or QR with removable end caps
XDR or SRAM / Shimano variants
Lifetime Warranty
SPECIFICATIONSOrientation: RearAxle type: TA 12x142Spoke holes: 24Brake compatibility: Disc (Center Lock)Driver body type: SRAM/Shimano RoadOver Locknut Material: n/aColor (hub): BlackDriver Mechanism: 12 Pawls Leaf Spring, 132 POEAxle material: Aluminum front & rearAxle - Convertible: NoDriver body material: AluminumHub shell: Aluminum – Angled flanges – Fully machinedOLD: 142mmBearings: Cartridge - SteelPower Measurement: Not Compatible
Zipp: In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM’s development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc and rim-brake wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp’s Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. At any time, there are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace.FEATURES
Better sealing, increasing durability over previous hub model
Quick engagement for a responsive ride
Light weight
Same bearing size and caps as premium-level Cognition hub
e-bike certified
Disc brake hub with Center locking rotor interface. The lock ring is included
Disc and rim brake variants
Through axles or QR with removable end caps
XDR or SRAM / Shimano variants
Lifetime Warranty
SPECIFICATIONSOrientation: RearAxle type: TA 12x142Spoke holes: 28Brake compatibility: Disc (Center Lock)Driver body type: SRAM XDROver Locknut Material: n/aColor (hub): BlackDriver Mechanism: 12 Pawls Leaf Spring, 132 POEAxle material: Aluminum front & rearAxle - Convertible: NoDriver body material: AluminumHub shell: Aluminum – Angled flanges – Fully machinedOLD: 142mmBearings: Cartridge - SteelPower Measurement: Not Compatible
Zipp: In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM’s development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc and rim-brake wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp’s Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. At any time, there are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace.FEATURES
Better sealing, increasing durability over previous hub model
Quick engagement for a responsive ride
Light weight
Same bearing size and caps as premium-level Cognition hub
e-bike certified
Disc brake hub with Center locking rotor interface. The lock ring is included
Disc and rim brake variants
Through axles or QR with removable end caps
XDR or SRAM / Shimano variants
Lifetime Warranty
SPECIFICATIONSOrientation: RearAxle type: TA 12x142Spoke holes: 28Brake compatibility: Disc (Center Lock)Driver body type: SRAM/Shimano MTBOver Locknut Material: n/aColor (hub): BlackDriver Mechanism: 12 Pawls Leaf Spring, 132 POEAxle material: Aluminum front & rearAxle - Convertible: NoDriver body material: AluminumHub shell: Aluminum – Angled flanges – Fully machinedOLD: 142mmBearings: Cartridge - SteelPower Measurement: Not Compatible
Sram: Zipp’s premium ZM2 SL lightweight hubset delivers durability and high performance so you remain focused on the trail. Precision engineered in Germany to deliver dependable precision performance to the gnarliest XC trail. The ZM2 SL provides 66 points of engagement for a quick response. The hub’s improved seal design means better durability in all weather conditions. In addition, it’s an Extremely light XC boost hub: front 85g (standard end caps), rear 227g (with XD driver body). Its AL 7076 T6 material has the highest fatigue strength. Automated bearing preload ensures correct bearing play for maximized hub life. Features
Lightweight hubset for MTB
66 points of engagement
Not e-bike Compatible.
SpecificationsAxle type: TA 12x148, TA 15x110, TA 15x110 Torque CapsSpoke holes: 24Brake compatibility: Disc (6-bolt)Driver body type: Microspline, SRAM XDColour (hub): BlackDriver mechanism: 6 Pawls Compression, 66 POEAxle material: Aluminium front & rearAxle - Convertible: NoDriver body material: AluminiumOLD: 110mm, 148mmBearings: Cartridge - Carbon SteelPower measurement: Not Compatible
Sram: Zipp’s premium ZM2 SL lightweight hubset delivers durability and high performance so you remain focused on the trail. Precision engineered in Germany to deliver dependable precision performance to the gnarliest XC trail. The ZM2 SL provides 66 points of engagement for a quick response. The hub’s improved seal design means better durability in all weather conditions. In addition, it’s an Extremely light XC boost hub: front 85g (standard end caps), rear 227g (with XD driver body). Its AL 7076 T6 material has the highest fatigue strength. Automated bearing preload ensures correct bearing play for maximized hub life. Features
Lightweight hubset for MTB
66 points of engagement
Not e-bike Compatible.
SpecificationsOrientation: RearAxle type: TA 12x148Spoke holes: 24Brake compatibility: Disc (6-bolt)Driver body type: SRAM XDColour (hub): BlackDriver mechanism: 6 Pawls Compression, 66 POEAxle material: Aluminium front & rearAxle - Convertible: NoDriver body material: AluminiumOLD: 148mmBearings: Cartridge - Carbon SteelPower measurement: Not Compatible
Sram: Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. SPECIFICATIONSSpares Category: SPOKE KITS
Sram: Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. SPECIFICATIONSSpares Category: SPOKE KITS
