The HCR headset assembly is compatible with Cane Creek HCR stems and third-party stems using included conversion spacer
BEARINGS: Stainless steel HELLBENDER bearings
SEALING: Bearings fully enclosed by steerer tube o-ring seal, interlocking Cable Seal, top cover lip seal, & dual-lip crown race seal
COMPATIBILITY: Optimized for wireless drivetrains.
Upper Stack: 7mm
Lower stack: 1mm
The HCR headset assembly is compatible with Cane Creek HCR stems and third-party stems using included conversion spacer
BEARINGS: Stainless steel HELLBENDER bearings
SEALING: Bearings fully enclosed by steerer tube o-ring seal, interlocking Cable Seal, top cover lip seal, & dual-lip crown race seal
COMPATIBILITY: Optimized for wireless drivetrains.
Upper Stack: 19mm
Lower stack: 12mm
Cane Creek chainrings offer the ability to run most modern drivetrains with our legendary eeWings cranks. These CNC machined rings utilize 8-bolt, direct-mount fitment and are offered in a variety of tooth sizes and offsets to suit modern 1x chainlines. For the first time, we now offer a one-stopshop that simplifies the process of riders looking to upgrade their crankset. No stressing over compatibility or fitment when it comes to adding Cane Creek eeWings to your 1x drivetrain.
MATERIAL: 100% CNC Machined 7075 Aluminum
WEIGHT: 30T Mtn: 58g | 40T Gravel: 106g
TOOTH COUNT 30, 32, 38, 40, 42, 44
OFFSET: Mtn: 0mm & 3mm | Gravel: 3mm only
COMPATIBILITY: Shimano and SRAM 9-12spd, SRAM 13spd
COLOUR: Black
CHAINLINE W/EEWINGS: 3mm offset yields 47mm or 52mm chainline
(on eeWings AR vs. eeWings Mtn, respectively)
0mm offset yields 55mm chainline
Cane Creek chainrings offer the ability to run most modern drivetrains with our legendary eeWings cranks. These CNC machined rings utilize 8-bolt, direct-mount fitment and are offered in a variety of tooth sizes and offsets to suit modern 1x chainlines. For the first time, we now offer a one-stopshop that simplifies the process of riders looking to upgrade their crankset. No stressing over compatibility or fitment when it comes to adding Cane Creek eeWings to your 1x drivetrain.
MATERIAL: 100% CNC Machined 7075 Aluminum
WEIGHT: 30T Mtn: 58g | 40T Gravel: 106g
TOOTH COUNT 30, 32, 38, 40, 42, 44
OFFSET: Mtn: 0mm & 3mm | Gravel: 3mm only
COMPATIBILITY: Shimano and SRAM 9-12spd, SRAM 13spd
COLOUR: Black
CHAINLINE W/EEWINGS: 3mm offset yields 47mm or 52mm chainline
(on eeWings AR vs. eeWings Mtn, respectively)
0mm offset yields 55mm chainline
Low friction needle bearings designed specifically to replace rear shock eyelet bushings. They reduce friction and provide smoother shock travel.
Fits 15mm diameter shock eyelets.
Includes eyelet bearing & spacing hardware.
Sold indiviually - 2 required for one shock.
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.
Bearing Code: B 543 MAX
Dimensions: 1 1/16" x 1.5" x 9/32"
ABEC: 3
Grade: 10
Grease: Kyodo Yushi PS-2
Application: Headsets
Weight: 28.77g
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: MR 20307
Dimensions: 20mm x 30mm x 7mm
ABEC: 3Â
Grade: 10
Seals: LLU
Grease: CRC Marine
Application: Frame Pivots
Weight: 19.28g
Note: Image for illustration only
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 6903 LLU MAX-E
Dimensions: 10 x 22 x 6/9
ABEC: 3Â
Grade: 10
Grease: CRC Marine
Application: Frame Pivots
Weight: 19.00g
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 63804
Dimensions: 20mm x 32mm x 10mm
ABEC: 3Â
Grade: 10
Seals: LLU
Grease: CRC Marine
Application: Frame Pivots
Weight: 19.28g
Note: Image for illustration only
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.BO version has a black oxide coating for great corrosion resistance.
Bearing Code: 6000
Dimensions: 10mm x 26mm x 8mm
ABEC: 3Â
Grade: 10
Seals: LLU
Grease: CRC Marine
Application: Frame Pivots
Weight: 19.28g
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.
Bearing Code: ACB S8551 BO
Dimensions: 36.8x45.8x6.5
Angular Contacts: 45x45
ABEC: 5Â
Grade: 5
Seals: LLB
Grease: Kyodo Yushi PS-2
Application: Headsets
Weight: 20.05g
The ultimate bearing. XD-15 uses an angular contact design to provide the perfet preload. Combined with the advanced lightweight nitrogen steel races and oversied grade 3 Cerbec ceramic balls, XD-15 is smoother and has a greater load capacity than any other bearing on the market.Now with Limited Lifetime Warranty against manufacturig defect.
Bearing Code: 152610
Dimensions: 15 x 26 x 10mm
ABEC: 5
Grade: 3
Seals: LLB
Grease:Â Kyodo Yushi PS-2
Application:Â Hubs, Bottom Brackets
Weight: N/A
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 686
Dimensions: 6 x 13 x 5
ABEC: 3Â
Grade: 10
Seals: LLB
Grease: CRC Marine
Application: Frame Pivots
Weight: 2.61g
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 6800
Dimensions: 10 x 19/20 x 7/9
ABEC: 3Â
Grade: 10
Seals: LLU
Grease: CRC Marine
Application: Frame Pivots
Weight: N/A
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Bearing Code: 3902
Dimensions: 15 x 28 x 10
ABEC: 3Â
Grade: 10
Seals: LLB
Grease: CRC Marine
Application: Frame Pivots
Weight: 24.81g
The ultimate bearing. XD-15 uses an angular contact design to provide the perfet preload. Combined with the advanced lightweight nitrogen steel races and oversied grade 3 Cerbec ceramic balls, XD-15 is smoother and has a greater load capacity than any other bearing on the market.Now with Limited Lifetime Warranty against manufacturig defect.
Bearing Code: 18307
Dimensions: 18 x 30 x 7mm
ABEC: 5
Grade: 3
Seals: LLB
Grease:Â Kyodo Yushi PS-2
Application:Â Hubs, Bottom Brackets
Weight: 12.88g
The ultimate bearing. XD-15 uses an angular contact design to provide the perfet preload. Combined with the advanced lightweight nitrogen steel races and oversied grade 3 Cerbec ceramic balls, XD-15 is smoother and has a greater load capacity than any other bearing on the market.Now with Limited Lifetime Warranty against manufacturig defect.
Bearing Code: 15267
Dimensions: 15 x 26 x 7mm
ABEC: 5
Grade: 3
Seals: LLB
Grease:Â Kyodo Yushi PS-2
Application:Â Hubs, Bottom Brackets
Weight: 11.19g
The ultimate bearing. XD-15 uses an angular contact design to provide the perfet preload. Combined with the advanced lightweight nitrogen steel races and oversied grade 3 Cerbec ceramic balls, XD-15 is smoother and has a greater load capacity than any other bearing on the market.Now with Limited Lifetime Warranty against manufacturig defect.
Bearing Code: 699
Dimensions: 9 x 20 x 6mm
ABEC: 5
Grade: 3
Seals: LLB
Grease:Â Kyodo Yushi PS-2
Application:Â Hubs, Bottom Brackets
Weight: 6.5g
The ultimate bearing. XD-15 uses an angular contact design to provide the perfet preload. Combined with the advanced lightweight nitrogen steel races and oversied grade 3 Cerbec ceramic balls, XD-15 is smoother and has a greater load capacity than any other bearing on the market.Now with Limited Lifetime Warranty against manufacturig defect.
Bearing Code: 6900
Dimensions: 10 x 22 x 6mm
ABEC: 5
Grade: 3
Seals: LLB
Grease:Â Kyodo Yushi PS-2
Application:Â Hubs, Bottom Brackets
Weight: 8.45g
CXD 6805N LLB - ABEC-5, XD-15, Ceramic-Hybrid, Radial Bearing - 25mm x 37mm x 6mm -The ultimate upgradeAn Enduro Bearings exclusive, our XD-15 Ceramic-Hybrid bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 3 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. 90% fill Kluber NBU52 grease only runs better and smoother with time and is highly resistant to being washed out. Its engineered to stick to the balls and continually be pulled back into the ball path where it is needed.We are so confident in CXD bearings that we offer an unlimited lifetime bearing and race warranty. The most impressive feature of these bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use, while the other ceramic-hybrid options will only get slower.The most common use for this bearings as a direct replacement bearing for Campagnolo Ultra Torque cranksets.The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.
Static load - 604lbf / 2.68kN
Weight - 18.7g
The ultimate bearing. XD-15 uses an angular contact design to provide the perfet preload. Combined with the advanced lightweight nitrogen steel races and oversied grade 3 Cerbec ceramic balls, XD-15 is smoother and has a greater load capacity than any other bearing on the market.Now with Limited Lifetime Warranty against manufacturig defect.
Bearing Code: 6801
Dimensions: 12 x 21 x 5mm
ABEC: 5
Grade: 3
Seals: LLB
Grease:Â Kyodo Yushi PS-2
Application:Â Hubs, Bottom Brackets
Weight: 5.6g
The ultimate bearing. XD-15 uses an angular contact design to provide the perfet preload. Combined with the advanced lightweight nitrogen steel races and oversied grade 3 Cerbec ceramic balls, XD-15 is smoother and has a greater load capacity than any other bearing on the market.Now with Limited Lifetime Warranty against manufacturig defect.
Bearing Code: 3803
Dimensions: 17 x 26 x 10mm
ABEC: 5
Grade: 3
Seals: LLB
Grease:Â Kyodo Yushi PS-2
Application:Â Hubs, Bottom Brackets
Weight: N/A
Enduro's ABEC 5 is the next performance step up from the popular ABEC 3 range. By using military level, high precision HRC-64 hardended Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing.
Bearing Code: 686
Dimensions: 6mm x 13mm x 5mm
ABEC: 5
Grade: 5
Seals: LLU
Grease:Â Kyodo Yushi PS-2
Application:Â Hubs, Bottom Brackets
Weight: 11.2g
