Durable composite pedal with integrated grip tape for securing footing in all weathers.
One piece composite body with grip tread
Ball bearings
Boron spindles
250g pr
9/16â€
Size specific enthusiast-level platform pedal provides optimal shoe/pedal interface.Details:
Optimal surface area
Minimal profile 16mm thin
10 adjustable pins per side for grip
Premium bearings & seal system
Stamp small recommended for shoe sizes: 4-9 (UK) // 37-43 (eu)
Stamp large recommended for shoe sizes: 9-14 (UK) // 43-49 (eu)
Specs:
Adjustable pins: 10 per side
Body material: A380 Aluminium
Endcap: T15
Footprint small size: 100x100mm
Footprint large size: 114x111mmÂ
Inner bearing type: Igus Bearing
Max rider weight: No restriction
Outer bearing type: Double Cartridge Bearing
Shoe size: US 5-10 // EU 37-43
Spindle material: Forged SCM 415 Chromoly Steel
Warranty: 5 years
Weight small: 439g per pair
Weight large: 494g per par
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal.The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel.The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43, and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated.
Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness.
20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges.
Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.
Small: 100mm x 100mm pedal body footprint
Large: 114mm x 111mm pedal body footprint
Available in red or black
Specification
Weight: 345g (Small), 375g (Large)
Spindle: Forged scm 435 chromoly steel
Body: Forged 6061-T6
Inner bearing: Igus LL-glide bearing
Outer bearing: Igus LL-glide bearing
Body dimensions: 100mm x 100mm (Small), 114mm x 111m (Large)
Pins: 10 adjustable pins per side
Warranty: 5 years
The ultimate pedal for enduro racing and riding.The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features.There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals.
Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless.
49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.
Ribbed body allows for better traction when unclipped
Chamfered edges for reduction in rock strikes
Excellent mud-shedding: the design is very open.
4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.
Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.
Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).
Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.
Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.Â
Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.
crankbrothers pedals are fully re-buildable for simple maintenance.  There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051).
Specification
Weight (per pair): 419g
Spindle: Forged scm 435 chromoly steel
Body: 6061-T6 aluminium
Wings: 17-4PH stainless
Spring: 300 series stainless steel
Inner bearing: Igus LL-glide bearing
Outer bearing: Enduro cartridge bearing
Pins: 12 pins per pedal
Cleats: Premium brass cleats included
Release angle: 15° or 20°
Warranty: 5 years
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in.
Moulded traction pins and diamond plate area provide grip and support.
Excellent mud-shedding: machined pedal body helps further prevent mud clogging.
Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).
Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers and Enduro bearings. It performs in even the most adverse conditions out on the trails.
Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.
Specification
Weight (per pair): 331gÂ
Spindle: Forged scm 435 chromoly steelÂ
Body: CompositeÂ
Wings: Stamped steelÂ
Spring: 300 series stainless steelÂ
Inner bearing: Igus LL-glide bearingÂ
Outer bearing: Enduro cartridge bearingÂ
Cleats: premium brass cleats includedÂ
Pins: Moulded traction pinsÂ
Release angle: 15° or 20°Â
Warranty: 5 years
Â
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.
Excellent mud-shedding: the design is very open.
Ribbed body for extra traction when unclipped
4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.
Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.
Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).
Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.
Chamfered edges help reduce rock strikes
Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.
Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.Â
Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.
crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051).
Specification
Weight (per pair): 320g
Spindle: Forged scm 435 chromoly steel
Body: 6061-T6 aluminium
Wings: 17-4PH stainless
Spring: 300 series stainless steel
Inner bearing: Igus LL-glide bearing
Outer bearing: Enduro cartridge bearing
Cleats: Premium brass cleats included
Release angle: 15° or 20°
Warranty: 5 years
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.
Cleat: Premium brass cleats included
Shims: Included
Release Angle: 15° to 20°
Warranty: 5 years
Weight: 304g per pair
Spindle: Forged scm435 chromoly steel
Body: 2 piece machined aluminium
Wings: Cast Steel
Spring: 300 series stainless steel
Inner bearing: Needle
Outer bearing: Cartridge
Maximum rider weight: No restrictions
Colour options: Black/Silver, Blue/Silver or Red/Silver
You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with refresh kit (product code CRB-16051)Â
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years.
Cleat: Premium brass cleats included
Shims: Included
Release Angle: 15° to 20°
Warranty: 5 years
Weight: 324g per pair
Spindle: Forged scm435 chromoly steel
Body: 2 piece machined aluminium
Wings: Stamped steel
Spring: 300 series stainless steel
Inner bearing: Bushing
Outer bearing: Cartridge
Maximum rider weight: No restrictions
Colours: Orange/Silver or Silver
You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with refresh kit (product code CRB-16051)Â
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.
Cleat: Premium brass cleats included
Shims: Included
Release Angle: 10° - Candy 1 pedals now come supplied with easy release cleats.
Warranty: 2 years
Weight: 272g per pair
Spindle: Forged scm435 chromoly steel
Body: one piece composite
Wings: Stamped steel
Spring: 300 series stainless steel
Inner bearing: Bushing
Outer bearing: Cartridge
Maximum rider weight: No restrictions
Colours: Black, Blue, Red or Neon Green
As with the rest of the crankbrothers range the pedals are fully serviceable with refresh kit (product code CRB-16051)Â
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal.The level 11 pedal is the top of the range crankbrothers flat pedal with a slimline, thin, concave profile, adjustable pins for grip and a titanium axle.The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43, and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated.
Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected.
13mm external and 11mm internal thickness.
Titanium axle.
20 adjustable gold pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges.
Internals run on an igus LL-glide bearing which has been exclusively formulated for crankbrothers and performs in even the most adverse conditions out on the trails.
Small: 100mm x 100mm pedal body footprint
Large: 114mm x 111mm pedal body footprint
Specification:
Weight: 299g (Small), 325g (Large)
Spindle: Titanium
Body: Forged 6061-T6
Inner bearing: Igus LL-glide bearing
Outer bearing: Igus LL-glide bearing
Body dimensions: 100mm x 100mm (Small), 114mm x 111m (Large)
Pins: 10 adjustable pins per side
Warranty: 5 years
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC, trail riding and cyclo cross.Â
Cleat: Premium brass cleats included
Shims: Included
Release Angle: 15° to 20°
Warranty: 5 years
Weight: 278g per pair
Spindle: Forged scm435 chromoly steel
Body: cast stainless steel
Wings: cast stainless steel
Spring: 300 series stainless steel
Inner bearing: Needle
Outer bearing: Cartridge
Maximum rider weight: No restrictions
Colours options: Silver/Blue or Silver/Red
You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals.As with the rest of the crankbrothers range the pedals are fully serviceable with refresh kit (product code CRB-16051)
The world’s most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes, and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders.The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike.
Release angle: 15° to 20°
Cleat: Premium brass cleats included
Warranty: 5 years
Weight: 479g per pair
Platform: Extruded/machined aluminium
Wings: cast stainless steel
Spring: 300 series spring stainless steel
Spindle: Forged scm435 chromoly steel
Q-factor: 57mm
Inner bearing: igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails
Outer bearing: enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike
Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal
Traction pins: 8mm adjustable
Excellent mud-shedding: using the very open designed pedal platform
Dual chamfered edges to reduce rock strikes
Ribbed body for extra traction when unclipped
4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal
Extremely lightweight: pedal design is very simple with only a few key parts
Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling
Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately
crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in.
Moulded traction pins and diamond plate area provide grip and support.Â
Excellent mud-shedding: machined pedal body helps further prevent mud clogging.
Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).
Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.Â
Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.
Specification
Weight (per pair): 403g
Spindle: Forged scm 435 chromoly steel
Body: A380 aluminium
Wings: Stamped steel
Spring: 300 series stainless steel
Inner bearing: Igus LL-glide bearing
Cleats: Premium brass cleats included
Pins: 8 adjustable traction pins
Release angle: 15° or 20°
Warranty: 5 years
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in.
Moulded traction pins and diamond plate area provide grip and support.Â
Excellent mud-shedding: machined pedal body helps further prevent mud clogging.
Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).
Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.Â
Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.
Specification
Weight (per pair): 395g
Spindle: Forged scm 435 chromoly steel
Body: A380 aluminum
Wings: Stamped steel
Spring: 300 series stainless steel
Inner bearing: Igus LL-glide bearing
Cleats: Premium brass cleats included
Pins: Moulded traction pins
Release angle: 15° or 20°
Warranty: 5 years
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform.
Release angle: 15° to 20°
Cleat: Premium brass cleats included
Warranty: 5 years
Weight: 435g per pair
Platform: Two piece aluminium + composite
Wings: Investment cast steel
Spring: 300 series stainless steel
Spindle: Forged scm435 chromoly steel
Inner bearing: Needle
Outer bearing: Cartridge
Traction pins: 8mm adjustable
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC, trail riding and cyclo cross.
Cleat: Premium brass cleats included
Shims: Included
Release Angle: 15° to 20°
Warranty: 5 years
Weight: 280g per pair
Spindle: Forged scm435 chromoly steel
Body: cast stainless steel
Wings: stamped stainless steel
Spring: 300 series stainless steel
Inner bearing: Bushing
Outer bearing: Cartridge
Maximum rider weight: No restrictions
Special edition colours: Silver/Black
You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals.As with the rest of the crankbrothers range the pedals are fully serviceable with refresh kit (product code CRB-16051)Â
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC, trail riding and cyclo cross.
Cleat: Premium brass cleats included
Shims: Included
Release Angle: 15° to 20°
Warranty: 2 years
Weight: 286g per pair
Spindle: Forged scm435 chromoly steel
Body: stamped steel
Wings: Stamped steel
Spring: 300 series stainless steel
Inner bearing: Bushing
Outer bearing: Cartridge
Maximum rider weight: No restrictions
Colours: Silver/Black or Silver/Red
As with the rest of the crankbrothers range the pedals are fully serviceable with refresh kit (product code CRB-16051)Â
