Sleeves snap on to the next gen candy and eggbeaters to tighten the interface between the shoe and pedal.
Includes: 1mm, 2mm, 3mm sleeves
Compatible with candy and eggbeater 11, 3, and 2
Designed for use with quattro, eggbeater and candy pedals. Enables you to use crankborthers pedals with 3 bolt cleat fitting road shoes.
Composite platform and brass cleat
Float: 6 degrees
Release angle: 15 or 20 degrees
Bolt pattern: 3 bolt
Traction pin kit for the Stamp, Mallet, Doubleshot and 5050 pedals.
8mm or 10mm anodized alloy pins, thread lock pre-applied
8mm is recommended for Mallet (3, E, DH, Trail) and Double Shot 3
10mm is recommended for Stamp 1 Gen 2, 2, 3, 7 & 11 flat pedals
40 pins included in each kit
Neither pin length is compatible with Stamp 1 gen 1 pedals
Sram: Truvativ pedal washers CroMo protects cranks from damage caused by over tightening pedals. Fits to all pedals. Made of steel. 9/16-inch spindle size. Hardwearing and super strong washer for long term use. Supplied 2 pedal washers.
Fits to all pedals
Made of steel
Protects cranks from damage caused by overtightening pedals
9/16-inch spindle size
Includes 2 pedal washers
LOOK: Spare cleats for LOOKs S-Track mountain bike pedal system.LOOKs DCS cleats have been optimally designed for excellent mud dispersal and gives a large contact surface between cleat and pedals. Supplied with wedges to increase or decrease shoe sole/pedal contact, these cleats are compatible with all types of mountain bike soles.
LOOK: Built for comfort and confidence, the EASY version of the X-TRACK cleats features multidirectional disengagement—ideal for beginners or casual riders. Their compact, lightweight design makes them perfect for MTB, gravel, or urban use, providing easy entry and effortless release when needed. SPECIFICATIONSMaterial: Premium steel Angular freedom: 6° Clip out direction: Multidirectional Angle of disengagement: 13° Compatibility: X-TRACK Collection, GEO Trekking Collection Lateral adjustment: 2 mm Angular adjustment: 1° Cleats weight: 45 g Accessories: 6 screws (5 x 9 mm) and 6 washers
LOOK: Designed for riders who value simplicity, reliability, and universal compatibility, the X-TRACK 2-screw micro cleats work with all SPD-standard pedals. Lightweight and compact, they offer smooth lateral disengagement and are ideal for MTB, gravel, or urban use. Whether you're commuting or grinding through the trails, these cleats deliver consistent, secure performance. SPECIFICATIONSMaterial: Premium steel Angular freedom: 6° Clip out direction: Lateral Angle of disengagement: 13° Compatibility: MTB Collection, GEO Trekking Collection, Gravel Collection Lateral adjustment: 2 mm Angular adjustment: 1° Cleats weight: 45 g Accessories: 6 screws (5 x 9 mm) and 6 washers
LOOK: The LOOK Keo Cleat with Gripper (9° Float) is designed to provide secure engagement, efficient release, and added safety when walking. Developed to minimise weight while maintaining full compatibility with all cycling shoes, it offers the same proven kinematics as the standard DELTA pedal system. The Keo Grip version features TPU anti-slip inserts that improve stability on slick surfaces and help keep the cleat firmly positioned against the shoe sole — particularly beneficial for carbon soles. LOOK’s Position Memory technology allows for easy cleat replacement while maintaining your exact previous setup.Features • Lightweight design with secure and efficient entry and release • Anti-slip TPU inserts for safer walking and improved shoe grip • Compatible with the complete LOOK Keo pedal range • Position Memory system for easy cleat replacement • 9° float for natural foot movement and reduced joint stressSpecifications Model: Keo Cleat with Gripper Float: 9° Material: Composite with TPU anti-slip inserts Compatibility: LOOK Keo pedal range
LOOK: The LOOK Keo Grip Cleat builds on the proven Keo platform to deliver improved safety, practicality, and walking comfort without compromising pedalling performance. Retaining full compatibility with all Keo pedals and cycling shoes, it features TPU anti-slip inserts on both sides for superior grip when walking—particularly useful on smooth or carbon soles. LOOK’s Position Memory system ensures easy and precise cleat replacement, allowing riders to maintain their ideal setup with minimal effort. Lightweight, stable, and dependable, the Keo Grip Cleat is the perfect upgrade for cyclists who value confidence on and off the bike.Features • TPU anti-slip inserts provide enhanced traction and safety when walking • Compatible with all cycling shoes and LOOK Keo pedal systems • Position Memory system allows easy, accurate cleat replacement • Lightweight construction for efficient power transfer • Secure, consistent entry and release mechanismSpecifications Compatibility: LOOK Keo pedal range Material: Composite with TPU anti-slip inserts Retention System: Position Memory Intended Use: Road cycling Walkability: Enhanced via dual-surface grip inserts
LOOK: For use with original, pre-Keo pedals, the LOOK Delta shape cleat functions by a rotational movement that allows release by the interior or exterior of the foot. The two sided exit improves safety. There is nothing to interfere with inside pedal release.The fluoropolymer material eases entry and exit and diminishes considerably the possibility of cleat noise.
LOOK: Replacement retention Blade for the Look KEO 2 Blade pedal. Carbon Blade does the work of the original traditional spring for cleat retention. Not suitable for other pedals.
LOOK: The end-cap removal tool is a dedicated service tool designed for safely removing the end caps on LOOK Power pedals. It provides a precise fit for both pedal families, ensuring clean, damage-free maintenance when accessing internal components.Features • Single tool supplied • Designed specifically for LOOK Power pedal end-caps • Suitable for Keo Blade Power and X-Track Power This kit contains:1 End cap removal toolCompatible with Keo Blade Power and X-Track Power
LOOK: The replacement blade kit is designed for the LOOK Keo Blade pedal family, enabling custom adjustment of engagement/disengagement tension in just seconds. It provides a clear upgrade route for performance-focused riders and service workshops alike.Features • Replacement kit allows tension adjustment from soft to firm in approximately 30 seconds. • Includes two “Power 8” retension blades, two lever axles, and a lever axle extraction tool. • Compatible with Keo Blade, Keo Blade Ceramic and Keo Blade Ceramic Ti models.SpecificationsKit contents 2 Power 8 retension blades, 2 lever axles, 1 lever axle extraction tool Compatibility Keo Blade, Keo Blade Ceramic, Keo Blade Ceramic Ti This
LOOK: The dual-output charging cable is designed for efficient, simultaneous charging of two Power pedals from a single USB-A source. It streamlines workshop and athlete support setups by reducing cable clutter while ensuring reliable, fast charging across the full LOOK Power ecosystem.Features • Simultaneous charging for two Power pedals • Single USB-A input to dual USB-C outputs • Compatible with Keo Blade Power and X-Track Power • Intended for use with the Power charger (not included)Specifications Input USB-A Outputs USB-C ×2 Compatibility Keo Blade Power, X-Track Power
LOOK: This right-side body assembly for the X-Track Power pedal system from LOOK serves as a full replacement for the right pedal body. It is intended to match the left side in geometrical and functional characteristics to maintain system balance and performance in single- or dual-sided setups.Features • Right pedal body supplied with 16-retention blade and lever • Needle bearing and double-sealed bearing included for durability • Supplied with spacer, double-lip seal, M5 screw, conical washer, alloy end-cap and end-cap removal tool • Designed to maintain the Q-factor, stack height and platform geometry of the X-Track system • Compatible with the X-Track Power platform to ensure full interchangeabilitySpecifications Compatibility: X-Track Power pedal system (right side) Kit contents: Right body module with 16-retention blade + lever; needle bearing; double-sealed bearing; spacer; double-lip seal; M5 screw; conical washer; alloy end-cap; end-cap removal tool
LOOK: This left-side body assembly for the X-Track Power pedal system provides a direct replacement for the left pedal body used in LOOK’s off-road power-meter platform. It allows riders to service or refresh the pedal without replacing the full power-meter axle, maintaining full system accuracy and durability for gravel and MTB use.Features • Left pedal body designed for the X-Track Power system • Stainless-steel platform contact surface for durability • Matches original Q-factor, stack height and geometry • Compatible with the left-side instrumented axle • Built for off-road and gravel conditions with robust constructionSpecifications Compatibility: X-Track Power pedal system (left side) Platform width: 60 mm Contact area: 540 mm² Float: 6° Stack height (pedal + cleat): 16.8 mm Body material: Aluminium Platform material: Stainless steel Waterproof rating: IPX7
LOOK: This right-body replacement for the Blade Power pedal system provides a complete service kit for restoring or maintaining the right pedal body. It includes the full body assembly with integrated retention blade and all required bearings and hardware for correct installation.Features • Right pedal body with 16-retention blade and lever • Supplied with needle bearing and double sealed bearing • Includes spacer, double-lip seal, M5 screw and conical washer • Alloy end-cap and removal tool provided • Designed as a direct replacement for the right side of the Blade Power systemSpecifications Compatibility: Blade Power pedal system Kit contents: Right body (16 retention blade + lever), needle bearing, double sealed bearing, spacer, double-lip seal, M5 screw, conical washer, alloy end-cap, end-cap removal tool
LOOK: This left-body component for the Blade Power pedal system from LOOK allows riders to replace the left side of their power-pedal setup with a bare body version, providing a serviceable option for upgrade or maintenance in a single-sided configuration.Features: • Left body assembly including lever and 16-retention blade • Needle bearing and double sealed bearing included • Spacer, double-lip seal, M5 screw and conical washer provided • Alloy end-cap and removal tool supplied for serviceability • Compatible with existing Blade Power system for left-side replacementSpecifications: Compatibility: Blade Power pedal system Kit contents: Left body (16 retention blade + lever), needle bearing, double sealed bearing, spacer, double-lip seal, M5 screw, conical washer, alloy end-cap, end-cap removal tool
LOOK: This kit provides two 12 Nm tension blades for riders who want to adjust the release tension of their Keo Blade Power pedals. It allows quick swapping of blades to fine-tune pedal feel, offering a firmer release setting and consistent engagement performance.Features • Two 12 Nm tension blades for the Keo Blade Power system • Two lever axles included for correct installation • Lever-axle extraction tool supplied for fast servicing • Enables rapid tension adjustment with minimal toolsSpecifications Compatibility: Keo Blade Power pedal system Contents: Two 12 Nm blades, two lever axles, one lever-axle extraction tool
