The unique Cage Side Mount system offers a smart accessory carrying solution utilising the bottle cage mounts. Features an adjustable angle, ideal for large downtubes on E-Bikes or MTBs and compatible with designated mini pumps, tools, and 16g CO2 cartridges. Includes two 16G and two 25G CO2 sized cartridge holders to fine tune your chosen accessories.
Engineering grade polymer
11x8x3cm
29g
A sleek handlebar rack with a sturdy aluminum frame and clamp, featuring an anti-droop support design that securely integrates with your bike for stable carrying. It also includes a cargo bungee cord for easy attachment of bags or essentials.
Compatible with handlebar diameters 25.4/28.6/31.8mm
Stem widths up to 52mm
Works with carbon handlebars (max torque: 5Nm)
4.5kg max load
Aluminum / Nylon straps
26x25x21cm (rack) / 120cm (bungee cord)
320g (rack) / 55g (bungee cord)
The ultimate quick-mount system for gravel and road bikes with rigid forks. A clever hook-and-loop strap mounting system allowing quick and easy installation on a wide range of bikes. Its innovative top plate automatically levels itself regardless of fork angle. The integrated QuickTrack® system lets Topeak TrunkBags slide, lock securely into place, and release in an instant.Â
Fork with hook and loop straps attachment
Aluminum / Engineering grade polymer / Nylon straps
Fits road & gravel bikes up to 700x50C
80-110mm front fork widths (centre to centre)
Works with Topeak MTX / MTX 2.0 QuickTrack® system
7kg / 15lb max load
Features clamp for front reflector
33x29.3x12cm
1,090g
*TetraRack is not recommended for carbon forks and seat stays*TetraRack series racks are not compatible with front or rear mounted V-Brake type systems.
The ultimate quick-mount system attaches to the seatstays of gravel and road bikes. A clever hook-and-loop strap mounting system allows quick and easy installation on a wide range of bikes. Its innovative top plate automatically levels itself regardless of the seatstay angle. The integrated QuickTrack® system lets Topeak TrunkBags slide, lock securely into place, and release in an instant.
Seatstays with hook and loop straps attachment
Aluminum / Engineering grade polymer / Nylon straps
Fits road & gravel bikes up to 700x50C
80-110mm seatstay widths (centre to centre)
Works with Topeak MTX / MTX 2.0 QuickTrack® system
9kg / 20lb max load
Features clamp for front reflector
39.5x30x12cm
950g
*TetraRack is not recommended for carbon forks and seat stays*TetraRack series racks are not compatible with front or rear mounted V-Brake type systems
UP TO 3X AIRFLOWCompared to traditional Presta valves, the TurboFlow delivers higher airflow and features a clog-free design, making it better suited for tubeless tyres.
High-flow valve adaptor for tubeless tyres, sold as a pair.
Boosts airflow efficiency by 300% for faster inflation
Includes a Presta valve core tool
Head: Presta
Material: AL CNC
Size: 0.8x0.8x2.8cm
Weight: 2.8g (1 pair)
The TurboFlow valve is a high-flow valve for tubeless tyres delivering 3 times more airflow than traditional Presta valves. The included valve tool ensures they're easy to fit and completely air tight around the rim. The clog-free design means sealant won't restrict air flow over time. Compatible with tyre inserts and available in 3 sizes to match your rim depth.Includes a Presta valve core tool.Sold as a pair.
Head: Presta
Material: AL CNC
Compatibility: 40mm: Rim depth ≤35mm, 60mm: Rim depth 35-50mm, 80mm: Rim depth 50-70mm
Size: 45mm: 1.3x1.3x7.4cm, 60mm: 1.3x1.3x8.8cm, 80mm: 1.3x1.3x10.8cm
Weight: 45mm: 12.8g (1 pair), 60 mm: 13.8g (1 pair), 80mm: 15.8g (1 pair)
A 16g CO₂ cartridge-shaped tubeless tool kit with a TipPlug Design—the plug remains inside the tyre after insertion to seal punctures. The kit includes three TipPlugs and three 3.5mm repair plugs. With 2-in-1 functionality—repair and inflation—it provides quick, reliable, and hassle-free tubeless tyre fixes on the go.
3× TipPlug Insertion Tips
3× Tubeless Tire Repair Plugs (3.5mm×50mm)
Presta Valve Core Tool
CNC aluminum / Stainless steel
8.8x2.2x2.2cm
38g
A compact workshop essential, housing four interchangeable pick tools. A quick release mechanism makes for quick and easy installation with all four picks neatly housed in the handle. Made from aluminium and hardened steel.
Aluminum / Hardened steel
2.3x13.5cm
116g
The dual hook design enables additional bike mounting positions for the Bike Scale Team Issue.Â
Engineering grade polymer / Hardened steel
10x7x7cm
61g
S71806/29 LLB - Angular Contact, Stainless-Steel, Bottom Bracket bearing - 29mm x 42mm x 7mmFits Hope bottom brackets.Angular-Contact, ABEC-5, Bottom Bracket Bearing featuring 440C stainless steel alloy races and balls with 90% fill, high-pressure, water-proof grease for maximum corrosion resistance. When properly installed (black seal in for BBs) and adjusted, Enduro Angular Contact (A/C) bearings engage all of the bearing's balls to spread the force over a larger surface area, minimizing wear and increasing bearing life. This is particularly important in applications like BBs, where there are constantly changing lateral loads on the bearings, which is typically the primary cause for premature bottom bracket bearing failure.Not all stainless steel is created equal.Enduro only uses 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. 440C has the highest strength, hardness, and wear resistance of all the standard 440-series stainless alloys with high carbon content. As expected, it is also the most expensive of the 440 series alloys and requires multiple rounds of heat treatment and cryogenic treatment to achieve its superior mechanical properties. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash your bike often, or where sweat can be a problem.Enduro stainless bearings all carry a full two year anti-corrosion warranty.The most common use for this bearing is as a direct replacement bearing for SRAM DUB BBs with a 29mm OD spindle.The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.
Static load - 590lbf / 2.62kN
Weight - 24.8g
The newsport comfort long reach handle with with all-new three-finger bar end - Touring / Fitness / E-Bike / SUV / MTB-Touring
Ergonomic grip surface with textured zones for the palm, fingers and thumb
Medium length fully rubberized bar end is independently adjustable to the grip surface
Relieves strain on the hands, arms and shoulders with equalized pressure distribution
Ideal hand alignment with multiple gripping positions
The neutral hand position relieves pressure on the ulnar nerve and eliminates pain, tingling and numb fingers
The best bartape in the world? Dropbars become a comfort zone! Road / Allroad / Gravel
Bartape made from vibration-absorbing medical high-tech material
Hand relief from equalized pressure distribution on the handlebars with no pressure peaks
Ergonomic material comfortably supports hands while preventing over-compression
Reduces vibration stress on hands, arms, shoulders and head on long or rougher rides
Excellent cushioning and maximum restoring forces from high-quality orthopaedic material
Anti-slip surface delivers control with sweaty hands or in wet weather
OrthoCell® for optimum pressure distribution: proven in orthopaedics and in Ergon saddles
Made in Europe
The comfort booster for the top flat area on drop bars. More damping, better pressure distribution. The pads are made of orthopaedic high-performance foam which significantly increase comfort on road bike handlebars. The high-end German-made OrthoCell® material relieves the hands and wrists in every grip position and reduces discomfort.
Self-adhesive pads for the upper flats and brake lever position
Excellent pressure distribution and vibration absorption, alleviates numbness and muscle fatigue in hands and arms
OrthoCell® high-end orthopaedic foam retains long-lasting cushioning and support
Simple installation under the handlebar tape
Made in Europe
The sandwich seat adapter enables you to fit a Brooks saddle with a double rail to most modern micro-adjust seat posts intended to clamp a single saddle rail. Intended for use with the following Brooks saddles: B72, B190, B33, B135, B66, B66 Short, B18.Inside the box:
Brooks sandwich seat adapter
3 sets of bolts: Thomson Elite/Masterpiece seatposts, Nitto S65 seatpost, universal 2-bolt seatpost.
Owners Manual
Weight: 92g
