UNIOR: How to use the tool:A worn chain shifts poorly and causes undue damage to the sprockets. The tool is a "go, no go" gauge designed to accurately indicate when a chain is worn out.Important!Measurement: from 0 to 0,6% - no chain wear. from 0,7 to 1,2% the chain is worn out and it is necessary to replace it. Product featuresMade from precision, laser cut steel.
UNIOR: Product featuresHow to use the tool:To alleviate poor shifting and uneven drive train wear, most manufacturers recommend chain replacement at or before 0,6% stretch. Now you can quickly and accurately determine the wear and stretch of any chain. Simply insert the chain checker`s pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading.
8 Pro quality, hardened steel Torx® wrenches for better wear resistance and longer tool life. Torx® heads on each end of the handle provide additional positions while a speed sleeve adds speed with efficiency and the sliding T-handle imparts additional leverage. Included tool holder perfectly positions each wrench for easy access and storage.
TOOLS: T10 / T15 / T20 / T25 / T30 / T40 / T45 / T40 IP Torx® wrenchesÂ
TOOL MATERIAL: Chrome vanadium steel (CR-V)Â
ADDED FEATURES: Speed Sleeve, Sliding T-handle Optional Clamp Set (Art No. TRK-N087)Â
SIZE: 36 x 32.5 x 17 cm / 14.2" x 12.8" x 6.7"Â
WEIGHT: 1.4 kg / 3.09 lb
BRT-018 - BSA30/ITA30 and DUB Adapter for BRT-002This adapter allows you to remove and install 29mm ID DUB bearings in BSA30/ITA30 threaded cups with the BRT-002 (EB8190) tool.
HT MR 18307 Outer - Outer Bearing Guide for Bearing Press (BRT-005 or BRT-050) Single guide for MR 18307 size bearings (18mm X 30mm). Please note this item is a single guide only, the image is to shows both sides of the guide, not a pair of guides. If you need a pair please order two.
UNIOR: Bottom bracket wrench designed for installing or removing Praxis Works M30 external bottom bracket cups, as well as other bottom brackets with a notch diameter of approximately 46.3 mm. The integrated 1/2" square drive allows compatibility with a torque wrench for precise installation. Material: Premium Flex Plus carbon steel Surface Finish: Trivalent chrome plated to ISO 1456:2009 standard Handle: Ergonomic heavy-duty dual-component handle Compatibility: Substitute for Praxis Works wrench TP-0330
UNIOR: Product features
Calibration tool allows you to calibrate the Pro truing stand and ensure the calipers and arms are centered with each other.
For best calibration results choose the correct calibration tool for your truing stand.
UNIOR: Set of tools in tray 3 for 2600D
5 x Socket 1/4", long type, 6 point (6, 7, 8, 9, 10)
1 x Reversible ratchet 1/4" (1/4")
1 x Socket 1/2", long type, 12 point (15)
1 x Reversible ratchet 1/2" (1/2")
1 x Shock bushing extractor set
5 x Fork seal driver tool (30, 32, 34, 35/36, 40)
1 x Combination pliers (160)
1 x Diagonal cutting nippers (140)
1 x Waterpump box joint pliers (240)
1 x External lock rings pliers, straight (140x3 - 10)
1 x External lock rings pliers, bent (140x3 - 10)
1 x Internal lock rings pliers, straight (140x8 - 13)
1 x Internal lock rings pliers, bent (140x8 - 13)
6 x Suspension top cap socket (24, 26, 27, 28, 30, 32)
UNIOR: Set of tools in tray 2 for 2600C - Frame and fork tools
1 x Steerer tube cutting guide (1"x1.1/8"x1.1/4"x1.1/2")
1 x Headset press (1"x1.1/8"x1.1/4"x1.1/2")
1 x Head set cup remover (1.1/4"x1.1/2")
1 x Head set cup remover (1.1/4"x1.1/8"x1.1/4")
1 x Star nut guide
1 x Star nut setter
1 x Crown race setter (1"x1.1/8"x1.1/4"x1.1/2")
1 x Dropout alignment gauges
3 x Frame taps (3, 5, 10 x 1)
1 x Pedal taps (9/16 x 20 TPI)
1 x Carbon saw blade for 750B, 2 pcs set
1 x Hacksaw (400)
1 x Locksmiths` hammer (500)
1 x Empty tray for SET2-2600C (560x570x40)
UNIOR: Product features
material: premium chrome vanadium steel
body drop forged
entirely hardened and tempered
surface finish: chrome plated to standard ISO 1456:2009
ergonomic heavy duty double component handle
made according to standard ISO 3315
StandardsISO 3315 No.252
UNIOR: Product features
The tool has a professional double injected plastic handle, which enables strong grip and great comfort.
Wrench is used to install or remove BSA30 external cups. Can also be used with a 1/2" torque wrench.
Unior's BSA30 bottom bracket wrench works on the new BSA30 standard bottom brackets which you can find on Rotor®, DUB, Zipp® and RaceFace® systems.
UNIOR: Product features
material: premium PLUS sheet metal
central locking system with a lock and folding key
lock with key included also foam keyring
full extension drawers with top quality ball-bearing slides
the synthetic covering protects drawers and tools from damage
coated with eco colour of Qualicoat quality standard
7 drawers (5 x L 564 x W 570 x H 70mm, 2x L 564 x W 605 x H 150mm)
basic dimensions L 663 x W 650 x H 870 mm
total volume of drawers: 214 litres
possible use of SOS tool tray system in drawers
maximum capacity of each drawer: 50kg
UNIOR: Product features
Laser cut from same tool steel as our Pro shop pedal wrench, heat treated for strength and durability. Pedal wrench features ergonomically shaped double dipped handle for comfort and enough leverage to loosen all the hard tighten pedals. 15 mm opening is laser cut with precision and perfect angle to help you loosen the pedals as easy as possible.
Made from laser cut tool steel
Heat-treated for strength and lasting performance
Double dipped ergonomic handle for comfort
270mm of length for extra leverage
Small and light weight, perfect for toolbox and traveling
UNIOR: Product featuresThe most advanced chain tool in our range. Featuring machined body & precisely made spindle threads for smoothness and ease of use. Large handle gives extra leverage and breaks the chain easily. Master Chain Tool features floating chain support for perfect positioning and support of any chain. Works with all derailleur chains from 6–12-speed, is compatible with SRAM AXS chain and works with 1/8?single speed chains. It also supports Campagnolo’s 11- and 12-speed chain peening. Tool comes with three different interchangeable chain supports; preinstalled is a single link support, available are also a wider double link chain support for extra grip on the chain and a dedicated SRAM AXS chain support. Hidden compartment at the in body of the tool features an additional replacement chain pin.Comes with:
Long and short derailleur chain support (compatible with 6–12-speed derailleur chains)
Dedicated SRAM AXS chain support
Campagnolo chain pin blocker
Replacement chain pin
Compatible with:
All derailleur chains from 6–12-speed
SRAM AXS flat top chain
Most single speed 1/8? chains
Campagnolo 11- and 12-speed chain peening
UNIOR: Product features
All models of bottom bracket sockets are precision CNC machined tools for installation and removal of different external bottom bracket cups. They are made of aluminum billet and anodized red for durable finish and precise fit, that won´t damage aluminum external bottom bracket cups. Knurling on the side of the socket creates better grip when threading cups by hand, meanwhile 1/2? square drive makes it easy to use with torque wrenches, ratchets and fixed handles.
T47 double sided bottom bracket socket features 16 and 12 notch interface with exchangeable adaptor to cover all different T47 bottom bracket standards.
UNIOR: Product features
Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. Locking mechanism keeps pliers closed for the easier storing. To unlock the locking mechanism simply squeeze and release the pliers.
In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.
UNIOR: Product features
Torque wrench specially designed for work on bikes. Both versions in a size to best fit the intended use, precise and easy to use. Smaller version features a ¼? square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features ½? square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors.
antislip handle
target torque warning: buzzer + 2 LED lights
operation mode: peak hold / track
unit selection: N-m, in-lb, ft-lb, kg-cm
gear teth: 60
battery: 1×AAA (not included), compatible with rechargeable battery
warranty: 10.000 cycle / one year
auto power off after 5 min
UNIOR: Product features
Pedal Genie is used as a substitute for pedals while adjusting derailleurs on a bicycle without pedals. It’s especially useful for building new bikes that usually come without pedals.
The tool features a strong double injected handle, which enables comfortable and efficient grip.
The Pedal Genie comes with two adaptors that offer two different ways of use. Threaded version for more efficient work and a conical version for quick checks.
Threaded part is designed to work on the drive-side crank only (9/16" x 20 tpi thread).
UNIOR: Product features
Fork seal driver tool is specially designed for dust seal installation on the suspension forks. The drivers are designed to use the forks bushing as a guide, eliminating crocked seal installation, and ensuring perfect fit of the seal. The tool is made from reinforced plastic and does not damage the seal or the fork housing during the installation. Available in different sizes, each of them corresponding to specific stanchion diameter, and is compatible with both flangeless and flanged seals, making them compatible with most modern forks.
Better compatibility is the biggest virtue of the newest version of this tool, but it also has laser engraved logos & spec, which will stay clearly visible for extended period of time.
