Chain holder for use when performing maintenance with the rear wheel removed. Suitable for both thru-axles and quick releases.
Material: Aluminum / Hardened steel / Engineering grade polymerÂ
Size: 10 x 8.5 x 5 cmÂ
Weight: 72 g
Multifunctional pedal wrench that includes 6mm and 8mm hex wrenches and a 15mm open-end wrench plus a handy bottle opener.
Material: Aluminum / Hardened steel
Size: 32 x 6.2 x 2.4 cm
Weight: 512 g
SOS (Save Our Shred) tool range offers a complete solution for cycling's most common mechanicals.The SOS Bottle cage is reversable for left / right entry with a tyre lever, tyre plug and 2 plugs handily stored behind your bottle (bottle not inlcuded).FEATURES
Reversible left / right entry bottle cage design
Tyre plug tool + 2x plugs
Tyre lever
73g
SOS (Save Our Shred) tool range offers a complete solution for cycling's most common mechanicals.The SOS Bottle cage is reversable for left / right entry with a tyre lever, tyre plug and 2 plugs handily stored behind your bottle (bottle not included). When buying the kit you benefit from the addition of the SOS Multi-Tool and storage for either a hand pump or CO2 cartridge (pump and CO2 not included).SOS Multi tool
Crankbrothers' versatile take on the multi-tool can be used similar to a T-handle, in-line screwdriver, or a typical set of L-key tools.
Gain a bit of extra leverage by extending the tool with the alloy Tool Tube or leaving it attached to the CO2 Chain Breaker.
Store a spare chain link with the magnetic holder.
S.O.S. CO2 CHAIN BREAKERThis tool helps with tyre inflation, loose tire valves and spokes. Attaching the tire lever serves as a sturdy handle when repairing chains.PROPER TYRE TOOLSCapable tyre levers and tyre plugs ensure you’ll have the tools needed.FEATURES
Reversible left / right entry bottle cage design
2, 2.5, 3, 4, 5, 6, 8mm hex
T10, T25 torx tools
Flat screwdriver
Tyre plug tool + 4x plugs
Tyre lever
Chain tool
Spoke wrenches 0, 1, 2
Valve core tool
CO2 head
247g
Fits a spare chain link + 16/20/25g CO2 or Crankbrothers Klic HV pump, sold separately
Optimized width for maximum pedalling clearance
Elevate your repair game with the new F-series multi tools. Perfect for riders with tubeless setup. The F11 multi tool makes it easy to plug a punctured tyre and even store extra plugs and a chain link. The magnetic case doubles as a handle, providing the convenience of the feel of a full size set of tools at all times. Features
2, 2.5, 3, 4, 5, 6, 8mm hex
T25 torx tool
Phillips screwdriver
Tyre plug tool and 3x plugs
Weight 136g
5 year warranty
Bonus features
Chain link holder (chain link not included)
Magnetic case / handle
Bottle opener
This tool allows you to remove and replace the lockring for Rotor cranks. Available in two different size options:
30mm - for removing and installing the lockring on Rotor 30mm cranksets
24mm - for removing and installing the lockring on Rotor 24mm cranksets
Compact - This tool allows you to remove and replace the lockring - for the spider on the Rotor Standard 30 mm crankset
Everything you need to fix and make precise adjustments to your bike while on the road. Featuring a fine tooth ratchet mechanism with adjustable torque TorqBit for accuratly setting component torque values.
2 - 6 Nm torque range
2, 2.5, 3, 4, 5, 6, 8mm Allend bits
T10, T15, T25 Torx bits
#2 Phillips screw driver
CrMo steel chain tool
Ratchet tool
Chrome vanadium steel construction
Nylon carry pouch
13x6.5x3.3cm
240g
Display Box 25pcsAn ingenious multifunction tool! Two tyre levers connect to form power link pliers for removing or installing a chain's master link. Integrated removing or installing master link.Includes:
Master link pliers
Tyre levers
Chain hook
Master link storage compartment
Presta valve core tool
11.5x2.3x1.8cm
45g
Designed for the home mechanic. This simple and effective bearing press will extract and insert linkage bearings with ease. Thanks to a CNC construction this tool is ultra durable. A wide range of adaptors are available to suit almost any linkage bearing. The bearing press and adaptors are supplied separately so you can customize the bearing press kit to suit your requirements for greater value for money. Adaptor kits are supplied with full extraction and insertion fittings. For more information on adaptor kits see the below table.NOTE - Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing bore hole
Designed for the home mechanic. This simple and effective bearing press will extract and insert linkage bearings with ease. Thanks to a CNC construction this tool is ultra durable. A wide range of adaptors are available to suit almost any linkage bearing. The bearing press and adaptors are supplied separately so you can customize the bearing press kit to suit your requirements for greater value for money. Adaptor kits are supplied with full extraction and insertion fittings. For more information on adaptor kits see the below table.NOTE - Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing bore hole
UNIOR: The Unior Home Kit Tool Case is a smart, compact solution for home mechanics who want high-end tools without the clutter. With 38 carefully selected Unior tools, it covers far more than just the basics—this is a foundation for a dream workshop that grows with you.Designed for easy organisation and future customisation, the case features two precision-cut SOS foam trays (one in the lid, one in the base) and an additional blank tray so you can expand your setup with tools that match your specific bike, riding style, or preferences. Whether you're tackling drivetrain overhauls, brake servicing, or suspension tweaks, this kit has you covered.Features
38 high-quality Unior tools for comprehensive home bike maintenance
Custom-cut SOS foam trays with laser-engraved tool names/codes for easy organisation
Blank foam tray allows for custom personalisation or additional storage
Heavy-duty case is IP67 certified waterproof and dustproof
Automatic pressure release valve for air travel or altitude changes
Double-throw latches and soft-grip handle for easy, secure transport
Compact yet expandable design, perfect for any home workshop
SPECIFICATIONSTool count: 38Wrenches
Ball-end hex wrenches (1.5 to 10mm)
Torx wrenches (T8–T40)
Cone wrenches (13–17mm)
Specialty tools:
Crowfoot pedal wrench
Rotor wear indicator
Cassette lockring tool + chain whip (6–12 speed)
Chain tool (11/12 speed)
Master link pliers (open/close function)
Chain wear indicator (6–13 speed including SRAM flat top)
Round spoke wrench (8 sizes)
16-notch bottom bracket wrench
2-in-1 disc brake tool (pad spreader + rotor truer)
Cable cuttersCrank cap tool + chainring nut wrenchOther:
Screwdrivers (flat and PH)
Tyre levers x2
2m/6ft measuring tape
Storage:
2 x SOS foam trays with tool cutouts
1 x blank foam tray
Case material: Heavy-duty compositeSeal rating: IP67 waterproof/dustproofExtras: Automatic pressure valve, secure latches, ergonomic handle
UNIOR: Disc Brake Rotor Truing Fork A disc brake rotor truing fork is designed to straighten bent or warped disc brake rotors. It ensures proper rotor alignment for optimal braking performance and prevents rubbing against brake pads. Multiple notches on the tool provide access to the rotor from different angles, allowing for precise and accurate truing. Compatible with rotors up to 2.4mm thick, it suits a wide range of bicycle disc brake systems.Advantages Made from laser-cut tool steel Heat-treated for long-lasting performance Suitable for rotors up to 2.4mm thick Includes a hole for easy hangingSafety Tip Always ensure disc calipers and rotors are completely cool before beginning any work.
UNIOR: Unior suspension top cap sockets are precision CNC-machined tools designed for the installation and removal of various low-profile hex-shaped top caps on suspension forks. Entirely machined from aluminum billet and anodized red for a durable finish and precise fit, these sockets ensure that top caps are not damaged during installation or removal. The sockets are designed without a chamfer to enable a tight fit and prevent part damage. Their short height prevents the socket from coming off low top cap profiles during wrenching and the 1/2? square drive makes them easy to use with torque wrenches, ratchets, and fixed handles.
Made from aluminum, CNC machined, and red anodized.
No chamfer socket design for an improved fit with the low top cap profile.
Short socket design to reduce the socket coming off the top caps during wrenching
1/2? square drive makes it easy to use with torque wrenches, ratchets and fixed handles such as our Pro Socket Handle.
New advanced technologyThe use of new technological methods and top quality materials result in tools with a long life span, safety designs ensure repair jobs without damages, customized solutions, excellent effectiveness, modern materials and ergonomic design provide good looks and safe use.Customized solutions for excellent resultsOur solutions offer adaptability to the bicycle parts of all producers. Our tradition, our own design, and constant technical development and modern technology keep us one step ahead.Excellent durabilityUnior hand tools finish many jobs faster and make working in tight areas easier. They are adapted to work on the latest bicycle models.
UNIOR: For fitting circlips on shafts
material: premium plus carbon steel
drop forged, entirely hardened and tempered
head polished
surface finish: trivalent chrome plated according to ISO 1456:2009
tips black finish
handles plastic dipped
made according to standard DIN 5254 form A
30% higher endurance in comparison to convenient lock rings pliers
UNIOR: Introducing the Hanger Genie 2.0, the next generation of the original Hanger Genie, now with improved performance. With improved tolerance and a new welded head design featuring a sealed bearing thread-in axle, the Hanger Genie 2.0 is the ultimate tool for re-aligning rear derailleur hangers and ensuring precise gear shifting.
Compact, foldable and highly accurate tool.
Fits the bikes with the most common wheel sizes, including 26", 27.5"/650B, and 29"/700.
Rotating Bottom Part for easy cleanse of the frame and accessories, allowing for seamless work around the wheel.
Lockable measuring gauge, securely lock measurements in place to maintain accuracy while repositioning.
Extended thread-in axle, providing additional clearance, perfect for full suspension frames.
Sealed bearing ensures smooth operation of the thread-in axle and longevity.
Handy gauge storage clips keep your measuring gauge conveniently stored and protected
The Hanger Genie 2.0 screws directly into rear derailleur hanger threads and features a precise measuring gauge that locks in place, ensuring you don’t lose your measurement as you adjust the tool against the wheel in various positions. The rotating bottom part of the tool allows for easy clearance around the frame, making it an essential tool for any bike maintenance kit.
UNIOR: For fitting circlips on bore holes
material: premium plus carbon steel
drop forged, entirely hardened and tempered
head polished
surface finish: trivalent chrome plated according to ISO 1456:2009
tips black finish
handles plastic dipped
made according to standard DIN 5256 form C
30% higher endurance in comparison to convenient lock rings pliers
with inserted tips
for diameter 12 to 60mm
UNIOR: For fitting circlips on bore holes
material: premium plus carbon steel
drop forged, entirely hardened and tempered
head polished
surface finish: trivalent chrome plated according to ISO 1456:2009
tips black finish
handles plastic dipped
made according to standard DIN 5256 form C
30% higher endurance in comparison to convenient lock rings pliers
with inserted tips
for diameter 12 to 60mm
