Low Profile high strength steel spoke wrench easily works on different nipples to adjust spoke tension and true wheelset. Each wrench works on two different sizes of spoke nipples
13G (3.5mm)/Shimano® 4.3mm
14G (3.4mm)/15G (3.2mm)
Mavic® M7/M9
DT T20/Campag 6.0mm
Hardened Steel
5.3x3.8x2.3cm
The original crankbrothers tool range. Compact and lightweight tools for any eventuality. Whether its making a minor adjustment or an on the trail repair these tools have you covered.
Frame: 6061-T6 aluminium
Tools: 6150 high tensile steel
Warranty: Lifetime
Weight: 175g
Length: 3.5" / 89mm
Chain tool: 8/9/10 speed compatible
Spoke wrench: #0, 1, 2, 3
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Screwdrivers: 2-phillips, 1-flat
Open wrench: 8mm, 10mm
Torx: T-25, T-10
Carrying case: Stainless and polymer
UNIOR:
Cone wrench, single sided – 13, 14, 15, 16, 17, 32
Adjustable wrench – 200
Open end wrench – 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 32
Flat wrench for suspension service
Suspension wrench with strap
Measuring tape – 3 m
Empty tray for SET2-2600D – 560x570x40
UNIOR: The Unior SET3-2600AC (code 629835) is a wheel-specific tool tray designed for integration with the 2600A and 2600C modular workbench systems. Developed for professional workshops, this tray includes a wide selection of wheel service tools including spoke wrenches, rotor truing tools, tyre levers, and a full set of single-sided cone wrenches. Each tool fits into a designated foam cut-out for organised storage and fast access during wheel builds, truing, and brake adjustments. The tray measures 560 × 570 × 40 mm and fits directly into the third drawer of the 2600A or 2600C setup.Included tools
Single-sided cone wrenches (1617/2DP-US) in 13 mm (x2), 14 mm (x2), 15 mm (x2), 16 mm (x2), 17 mm (x2), 18 mm, 19 mm (x2), 20 mm, 22 mm, 23 mm, 24 mm, 26 mm, 27 mm, 30 mm, 32 mm, 36 mm
Plastic tyre levers 1657ORANGE (1 pair)
Metal tyre levers 1657/2A (1 pair)
Flat spoke holder 1632
Spoke wrenches 1630/5 in 4 mm, TX20, 3.30 mm, 3.45 mm
Pro spoke wrenches 1633/2P-US in 3.3 × 3.45 mm and 4 × 4.4 mm
Double-sided Shimano spoke wrench 1634/2P-US (4.3 × 4.4 mm)
Double-sided spoke wrenches 1636/2P-US in 5 × 5.5 mm and 5.5 × 6 mm
Mavic spoke wrench 1635/2P-US
Mavic R-Sys nipple wrench 1635/2AP-US (6.8 mm)
Disc brake rotor lockring wrench 1727/2DP-US
Disc brake piston spreader 1750/2DP-US
Rotor truing fork 1666/2DP-US with 2.2 mm correction prong
Foam tray insert with cut-outs for all tools, size 560 × 570 × 40 mm
UNIOR: The Unior 2600D Suspension Workbench is designed to meet the highest standards of bike suspension professionals. With its robust construction, dedicated tools, and thoughtful design, it is ideal for anyone needing a reliable and efficient workspace for suspension maintenance and repairs. Upgrade your workshop with the Unior 2600D Suspension Workbench and experience the superior quality and functionality it offers. Tool Trays:Suspension tools 1 (SET1-2600D): Tools for maintenance and repair of suspension forks.Suspension tools 2 (SET2-2600D): Tools for maintenance and repair of suspension forks.Suspension tools 3(SET3-2600D): Specialized tools for suspension servicing.Unior 990WD7 BLACK Tool CabinetThe workbench also includes the Unior 990WD7 BLACK tool chest, offering extensive storage space to keep your workshop organized.Unior 990WD7 BLACK Tool Chest Features:material: premium PLUS sheet metalCentral Locking System: Cabinets come with a lock and folding keyDrawers: Fully extendable drawers with top quality ball-bearing slidesSynthetic Covering: Protects drawers and tools from damageEco-Friendly Coating: Coated with Qualicoat quality standard paint7 Drawers: 5 x shallow drawers (L 564 x W 570 x H 70mm), 2x high drawers (L 564 x W 605 x H 150mm)Basic Dimensions: L 663 x W 650 x H 870 mmTotal volume capacity: 214LLoad capacity/drawer: 50kg
Added Vice: The workbench is equipped with a vice, size 150mm, for precise work, ensuring secure clamping of components during maintenance.
Bench Mount Clamp: The benchtop-mounted clamp allows easy holding of suspension forks during servicing.
Paper Roll Holder: Mounted under the bench, the paper roll holder allows for quick and easy cleaning of oil spills and residues.
UNIOR: This all-in-one bleed kit tray is the ultimate solution for home or workshop mechanics, covering nearly every major hydraulic brake system on the market. With separate kits for both mineral oil and DOT systems, it includes high-quality TPX syringes, precision fittings, and all the blocks, adapters, and extras needed to service Shimano, SRAM, Magura, TRP, Tektro, and more. Thoughtfully organised with durable components, this set ensures a hassle-free, professional bleed every time—just add your own fluid. MINERAL OIL PART INCLUDES: Lever-end 30 ml transparent funnel (syringe body) with brass M5 thread Threaded stainless steel plug (oil stopper) with hanger Lever-end 20 ml Luer slip-type transparent funnel (syringe body) for Magura MT levers Caliper-end 20 ml TPX syringe with long-lasting tube Stainless steel tube insert providing a guided fitment between the tube and the bleed nipple Tube with M6 brass fitting for Magura and TRP/Tektro hydraulic brakes Clamps for easier gravity bleed Brass M5-M6 adapter for TRP/Tektro hydraulic brakes Brass adapter for Shimano drop-bar hydraulic brakes (Dura-Ace, Ultegra, 105, GRX, Tiagra) Base for funnel and adapters with spare O-ring studs at the bottom Bleed block for Shimano flat-bar hydraulic brakes (2 or 4-piston type), also suitable for TRP/Tektro Bleed block for Shimano drop-bar hydraulic brakes Bleed blocks for Magura MT hydraulic brakes Rubberised one-side hook and loop strap, 25 cm (for securing the caliper syringe to frame or fork) Spare O-rings (5 pcs)Compatibility: This kit is compatible with all Shimano hydraulic brakes (XTR, XT, Saint, Zee, SLX, Deore, Alivio, Acera, Alfine, Metrea), including Shimano drop-bar models (Dura-Ace, Ultegra, 105, Tiagra, GRX). Also compatible with all Magura MT, TRP, and Tektro hydraulic brakes.DOT OIL PART INCLUDES: 3x 20 ml TPX syringes 2x M5 assembly 1x Bleeding Edge assembly Spare O-rings Bleed block for older SRAM hydraulic brakes (2 or 4-piston type) Bleed block for latest SRAM hydraulic brakesSuitable for: Compatible with all SRAM hydraulic brakes including post-2017 models with Bleeding Edge ports. Also works with all Avid brakes (Elixir, Juicy, etc.) and older Formula brakes (Oro, C1, R1, R0, K24, K18). Not compatible with Formula Cura hydraulic brakes.
UNIOR: Our tire levers come as a set of two, shaped to interlock with each other for storage. They're made of glass fiber-reinforced plastic so they're super strong and durable. The broad tip makes it safer for use on carbon wheels, and the spoke hook makes it easy to use multiple levers for those really tight tires. Optimised for effective leverage and ergonomics. Product features
Useful for every professional mechanic or home user.
Ergonomic and easy to use
High strength plastic ensures durability and no damage to rims
Provide excellent leverage
UNIOR: This comprehensive wheel building kit contains every tool a professional or home mechanic might need to build a wheel from components to finished item and keep wheels straight and true. Includes 19 wheel specific tools in a workshop friendly storage box with pre-cut foam inlays Product features
Manufactured with high quality carbon steel to ensure minimal wear to tools and wheel components being worked on.
Includes tools compatible with the most common nipple and spoke types.
The Nipple Insertion Tool makes seating nipples through double wall rims quick and easy.
Compact two layer foam storage box.
Kit includes the following tools:
Speed nipple bit 2.5 mm
Speed nipple bit 1.5 mm
DT Swiss® SQUORX nipple tool
Inverted square nipple driver
Spoke nipple driver
Spoke nipple insertion tool
Mavic R-sys nipple wrench
Spoke wrench, Mavic
Spoke, bearing and cotter gauge
Spoke wrench sizes TX20, 3.23, 3.30, 3.45, 4.0, 4.3, 4.4, 5.0, 5.5 mm
Socket wrench 5.5
Flat spoke holder
Straight Pull Spoke Pliers
UNIOR: This double-sided wrench features a 7mm and 8mm opening on each side, making it versatile and suitable for a wide range of brake systems Introducing the Flare Nut Wrench. This double-sided wrench features a 7mm and 8mm opening on each side, making it versatile and suitable for a wide range of brake systems. The five-sided head holds the nut on five sides, spreading the force evenly and preventing damage to the fasteners. This wrench is specifically designed to be used on any hydraulic brake system, including compression hydraulic hose nuts and bleed nipples. Its low-profile design allows for easy access to fittings in tight spaces. Additionally, the Flare Nut Wrench can be used as a standalone tool or in combination with a torque wrench via its built-in 1/4" square drive. Product features
Double sided wrench with 7 and 8mm opening,
Each side features five sided flare wrench head that holds the nut on five sides and spreads the force evenly, preventing damaging the fasteners.
Designed to be used on any hydraulic brake system - to be used with compression hydraulic hose nuts and bleed nipples.
Low profile design for easier access to the fitting in tight spaces
Designed to work as a standalone wrench or be used as a crow foot in combination with torque wrench via 1/4? built in square drive.
UNIOR: Product features
Calibration tool allows you to calibrate the Pro truing stand and ensure the calipers and arms are centered with each other.
For best calibration results choose the correct calibration tool for your truing stand.
Pro truing stand V1, black and chromed finish, choose calibration tool 629229.
Pro truing stand V2, black finish (available from June 2022), choose calibration tool 629288.
UNIOR: Product features
Set features dust seal drivers in size 30, 32, 34, 35, 36, 37, 38 and 40.
Fork seal driver tool is specially designed for dust seal installation on the suspension forks. The drivers are designed to use the forks bushing as a guide, eliminating crocked seal installation, and ensuring perfect fit of the seal. The tool is made from reinforced plastic and does not damage the seal or the fork housing during the installation. Available in different sizes, each of them corresponding to specific stanchion diameter, and is compatible with both flangeless and flanged seals, making them compatible with most modern forks.
Better compatibility is the biggest virtue of the newest version of this tool, but it also has laser engraved logos & spec, which will stay clearly visible for extended period of time.
UNIOR: Product featuresCrowfoot is compatible with 1/2" torque wrenches and used to verify if pedals are tightened to correct specification. When used with 1/2" ratchet or fixed handle it can be also used as regular pedal wrench. Laser cut from tool steel and heat-treated for strength and durability.
UNIOR: Master Kit Tool Case is a perfect starting point for the ultimate toolbox of your dreams. Equip it with the tools of your own selection and enjoy all the customization options this case provides.
The toolbox is designed especially for bike tools; it’s made of heavy duty plastic and is waterproof and dustproof.
Flaps in the lid can be closed tightly with the Velcro straps; when closed, they also secure the tools in place. Open flaps and inner part of the lid are equipped with 44 individual pockets to carry your tools. The biggest pockets can take our T-handle hexes up to size 10, and a special small pockets can securely hold L-shaped hex down to size 1.5 or similar small tools, so nothing ever gets lost.
Two side tool trays with cut out SOS foam, dimensions 280 mm × 250 mm, will keep your tools in place. When not in use the trays are stored in the case, when working the trays can be fixed on the side of the case, enabling you to have all of the tools always at hand and more space on the table for other items. Side trays are built with metal chassis for stability and strength.
Additional SOS foam tray for tools storage (dimensions 385 mm × 280 mm) at the bottom of the case.
Additional space for spare parts and/or lubes.
Advantages:
Wheels and retractable handle with safety latch for easy transportation
The pockets are sewed together with durable nylon thread
Blank trays for customization available separately, cut them yourself and create the ultimate tool case for your needs. We suggest using hot wire foam cutter or utility knife for cutting.
Waterproof and dustproof in accordance with IP67 certificate
Watertight seal around lid
Automatic pressure release valve
Easy to open/close double throw latches
Load tested soft grip handle
Robust case from heavy-duty composite
Corrosion free nylon pins
Option to lock the case with a padlock (not included)
Aluminum divider at the bottom of the tool case to keep your tools organized
Flaps neatly close into the lid of the tool case
The lid can carry T handle hexes up to size 10
Special safety tight pockets to hold small tools
44 pockets in total, three SOS foam trays that can fit 50 or more tools, small parts organizer
UNIOR: Product featuresModern replacement of the traditional chain whip. Pins on the tool engage with the smallest 10T sprocket on the cassette and hold it in place, while the opening in the middle allows for easy access to the cassette lockring.
material: premium flex plus carbon steel
surface finish: chrome plated according to ISO 1456:2009
ergonomic heavy duty double component handle
Single sided, compatible only with Sram X-Range cassettes
Ridges on the outside of the pins provide a secure grip on the cassette
Access hole allows for a cassette lockring tool to fit.
UNIOR: Product featuresSet contains cone and open wrenches, tape measure and digital vernier and suspension strap with wrench.Set of tools in tray 2 for 2600D
6 x Cone wrench, single sided (13, 14, 15, 16, 17, 32)
1 x Adjustable wrench (200)
11 x Open end wrench (6 x 7, 8 x 9, 10 x 11, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 32)
1 x Measuring tape (3m)
1 x Digital calliper (0 - 150)
1 x Suspension wrench with strap
UNIOR: Product features
Repair bike stand with fixed plate is designed for service workshops and every day use.
Fixed plate is ergonomically designed. Maximum load capacity is 30kg, which enables the servicing of heavier bikes.
Clamp can grip tubes of any shape, with diameter of minimum Ø22mm to maximum Ø60mm.
Stand is adjustable by height between 947 and 1570 mm.
weight of the stand is 36kg
Replaceable rubber jaw covers, item 1693.11
Code 623226 article 1693B1 is stand with jaw with spring and without fixed plate
Code 623223 article 1693BS is stand with fixed plate and jaw with adjustable nut
Code 623227 article 1693BS1 is stand with jaw with adjustable nut and without fixed plate
Repair bike stand 1693B1 and 1693BS1 is designed for floor or ceiling mount.
UNIOR: Product featuresAll models of bottom bracket sockets are precision CNC machined tools for installation and removal of different external bottom bracket cups. They are made of aluminum billet and anodized red for durable finish and precise fit, that won´t damage aluminum external bottom bracket cups. Knurling on the side of the socket creates better grip when threading cups by hand, meanwhile 1/2? square drive makes it easy to use with torque wrenches, ratchets and fixed handles.
UNIOR: Product featuresAll models of bottom bracket sockets are precision CNC machined tools for installation and removal of different external bottom bracket cups. They are made of aluminum billet and anodized red for durable finish and precise fit, that won´t damage aluminum external bottom bracket cups. Knurling on the side of the socket creates better grip when threading cups by hand, meanwhile 1/2? square drive makes it easy to use with torque wrenches, ratchets and fixed handles.
UNIOR: Guide threads into adaptor to hold taps in place and centers the tool during usage. Guide is compatible with both 1697.1 and 1698.1 taps and 1697.2/4 and 1698.2/4 adaptors. It consists of male and female part with a precise fit.
