Zipp: The Zipp 303 XPLR SW is big enough for your biggest gravel goals. Just how big? This wheelset is the fastest on gravel, thanks to its mega-wide rim that integrates seamlessly with approved gravel racing tires.* Most gravel wheels are modified versions of existing road wheels, focusing on stiffness and lightweight. Zipp takes a different approach. In gravel, resistance and vibrations from bumpy surfaces create a barrier that slows riders down. To combat this, Zipp applied Total System Efficiency specifically to the challenges of gravel. The wide profile increases air volume, allowing for lower tire pressures without squirm. That means you mitigate surface vibrations while maintaining grip when cornering or traction while climbing. The rim profile also creates a seamless transition with gravel tires for unsurpassed aero efficiency on gravel. And while the 303 XPLR SW is built big, it’s still lightweight to keep you fast and fresh for those long, fulfilling days in the saddle. The Zipp 303 XPLR SW is compatible only with approved tires. FEATURES
Fastest race wheel on gravel, features tubeless and hookless rim profile
Ultra-wide internal profile for decreased rolling resistance, ability to run pressures under 30psi (2.1 bars)
Wide and deep profile integrates seamlessly with gravel tires to increase aerodynamic efficiency
Applies Zipp’s Total System efficiency to high performance gravel
Max tire pressure 50 psi/3.45 bar
ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement
Center locking rotor interface. Lockring is included with the wheels.
XDR or SRAM/Shimano driver bodies
Campagnolo N3W Driver body sold separately
Ships with 12mm front and rear end caps
Lifetime Warranty
*303 XPLR SW IS ONLY COMPATIBLE WITH APPROVED TIRES. The Goodyear XPLR Slick and Goodyear XPLR Inter are specifically designed and optimized for the 303 XPLR SW.
Size (wheels) 700cRim construction Carbon – HooklessTire compatibility Tubeless tires onlyRim depth 54mmBrake compatibility Disc (Center Lock)Rim - inside width 32mmRim profile SymmetricalRim finish UD Fiber, Impress valve graphic, Adhesive decalsNipple material AluminiumSpoke type CX-Ray - BlackSpoke count 24Spoke pattern 2 CrossDriver body type n/a, SRAM XDR, SRAM/Shimano RoadAxle type (Wheels) TA 12x100Bearings Cartridge - Carbon SteelDriver Mechanism 6 Pawls, Compression Springs, n/aMax tire pressure 50psi/3.45barMax recommended system weight 286lbs/130kgMax outside width 40mmWeight Based On Estimated lightest weight for wheelset configuration: 12mm through axles and XDR body. Tape and valve included in weight.Weight (g) 1452
Zipp: The Zipp 303 XPLR SW is big enough for your biggest gravel goals. Just how big? This wheelset is the fastest on gravel, thanks to its mega-wide rim that integrates seamlessly with approved gravel racing tires.* Most gravel wheels are modified versions of existing road wheels, focusing on stiffness and lightweight. Zipp takes a different approach. In gravel, resistance and vibrations from bumpy surfaces create a barrier that slows riders down. To combat this, Zipp applied Total System Efficiency specifically to the challenges of gravel. The wide profile increases air volume, allowing for lower tire pressures without squirm. That means you mitigate surface vibrations while maintaining grip when cornering or traction while climbing. The rim profile also creates a seamless transition with gravel tires for unsurpassed aero efficiency on gravel. And while the 303 XPLR SW is built big, it’s still lightweight to keep you fast and fresh for those long, fulfilling days in the saddle. The Zipp 303 XPLR SW is compatible only with approved tires. FEATURES
Fastest race wheel on gravel, features tubeless and hookless rim profile
Ultra-wide internal profile for decreased rolling resistance, ability to run pressures under 30psi (2.1 bars)
Wide and deep profile integrates seamlessly with gravel tires to increase aerodynamic efficiency
Applies Zipp’s Total System efficiency to high performance gravel
Max tire pressure 50 psi/3.45 bar
ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement
Center locking rotor interface. Lockring is included with the wheels.
XDR or SRAM/Shimano driver bodies
Campagnolo N3W Driver body sold separately
Ships with 12mm front and rear end caps
Lifetime Warranty
*303 XPLR SW IS ONLY COMPATIBLE WITH APPROVED TIRES. The Goodyear XPLR Slick and Goodyear XPLR Inter are specifically designed and optimized for the 303 XPLR SW.
Size (wheels) 700cRim construction Carbon – HooklessTire compatibility Tubeless tires onlyRim depth 54mmBrake compatibility Disc (Center Lock)Rim - inside width 32mmRim profile SymmetricalRim finish UD Fiber, Impress valve graphic, Adhesive decalsNipple material AluminiumSpoke type CX-Ray - BlackSpoke count 24Spoke pattern 2 CrossDriver body type n/a, SRAM XDR, SRAM/Shimano RoadAxle type (Wheels) TA 12x142Bearings Cartridge - Carbon SteelDriver Mechanism 6 Pawls, Compression SpringMax tire pressure 50psi/3.45barMax recommended system weight 286lbs/130kgMax outside width 40mmWeight Based On Estimated lightest weight for wheelset configuration: 12mm through axles and XDR body. Tape and valve included in weight.Weight (g) 1452
Zipp: The Zipp 303 XPLR S is big upgrade for gravel riders without a big price tag. This wheelset borrows key innovations from our premium wide gravel wheelset, it is affordable and robust for discerning gravel riders. This wheelset is the fastest on gravel, thanks to its mega-wide rim that integrates seamlessly with approved gravel racing tires.* In gravel, resistance and vibrations from bumpy surfaces create a barrier that slows riders down. To combat this, Zipp applied Total System Efficiency specifically to the challenges of gravel. The wide profile increases air volume, allowing for lower tire pressures without squirm. That means you mitigate surface vibrations while maintaining grip when cornering or traction while climbing. The rim profile also creates a seamless transition with gravel tires for unsurpassed aero efficiency on gravel. And while the 303 XPLR S is built big, it’s light to keep you fast and fresh for those long, fulfilling days in the saddle. The Zipp 303 XPLR S is compatible only with approved tires. FEATURES
Fast and robust gravel wheel, features tubeless and hookless rim profile
Ultra-wide internal profile for decreased rolling resistance, ability to run pressures under 30psi (2.1 bars)
Wide and deep profile integrates seamlessly with gravel tires to increase aerodynamic efficiency
Applies Zipp’s Total System Efficiency to high-performance gravel
76 / 176 DB hubs with Center locking interface XDR or SRAM/Shimano driver bodies
Ships with 12mm front and rear end caps
Max tire pressure 50 psi/3.45 bar
Lifetime Warranty
*303 XPLR S IS ONLY COMPATIBLE WITH APPROVED TIRES. The Goodyear XPLR Slick and Goodyear XPLR Inter are specifically designed and optimized for the 303 XPLR S.
Size (wheels) 700cRim construction Carbon – HooklessTire compatibility Tubeless tires onlyRim depth 54mmBrake compatibility Disc (Center Lock)Rim - inside width 32mmRim profile SymmetricalRim finish UD fiber, adhesive decalsNipple material BrassSpoke type CX-SprintSpoke count 24Spoke pattern 2 CrossDriver body type n/a, SRAM XDR, SRAM/Shimano RoadAxle type (Wheels) TA 12x100, TA 12x142Bearings Cartridge - Stainless SteelDriver Mechanism 3 Pawls Leaf Spring, n/aMax tire pressure 50psi/3.45barMax recommended system weight 286lbs/130kgMax outside width 40mm
Zipp: The Zipp 303 XPLR S is a big upgrade for gravel riders—without the big price tag. This wheelset borrows key innovations from Zipp's premium wide gravel wheels, offering a robust and affordable option for discerning riders.This is the fastest wheelset on gravel, thanks to its mega-wide rim that integrates seamlessly with approved gravel racing tyres.*Gravel riding presents a unique set of challenges: resistance and vibrations from bumpy surfaces slow you down. To overcome this, Zipp applied Total System Efficiency specifically to gravel conditions.The wide rim profile increases air volume, allowing lower tyre pressures without the tyres squirming. That means you dampen surface vibrations while maintaining grip in corners and traction on climbs.The rim design also creates a smooth transition with gravel tyres for unmatched aerodynamic efficiency on loose terrain.Despite being built for the rigours of gravel, the 303 XPLR S remains lightweight—keeping you fast and fresh for those long, satisfying days in the saddle.FEATURES
Fast and robust gravel wheel, features tubeless and hookless rim profile
Ultra-wide internal profile for decreased rolling resistance, ability to run pressures under 30psi (2.1 bars)
Wide and deep profile integrates seamlessly with gravel tires to increase aerodynamic efficiency
Applies Zipp’s Total System Efficiency to high-performance gravel
76 / 176 DB hubs with Center locking interface XDR or SRAM/Shimano driver bodies
Ships with 12mm front and rear end caps
Max tire pressure 50 psi/3.45 bar
Lifetime Warranty
*303 XPLR S IS ONLY COMPATIBLE WITH APPROVED TIRES. The Goodyear XPLR Slick and Goodyear XPLR Inter are specifically designed and optimized for the 303 XPLR S
SPECIFICATIONS Orientation (wheels) RearSize (wheels )700cRim construction Carbon – HooklessTire compatibility Tubeless tires onlyRim depth 54mmSurface texture SmoothBrake compatibility Disc (Center Lock)Rim inside width 32mmRim profile SymmetricalRim finish UD fiber, adhesive decalsColour (Decal) StandardNipple material BrassNipple anti-rotation Sapim Secure-LocSpoke type CX-SprintSpoke count 24Spoke pattern 2 CrossHub 176D Driver body type SRAM/Shimano RoadColour (hub) BlackAxle type (Wheels) TA 12x142Axle material Aluminum front & rearBearings Cartridge - Stainless SteelDriver Mechanism 3 Pawls Leaf SpringDriver body material AluminiumMax tire pressure 50psi/3.45barMax recommended system weight 286lbs/130kgMax outside width 40mm
Zipp: Zipp’s 353 NSW Tubeless Disc brake is the pinnacle wheelset for today’s endurance rider and road racer. Zipp’s most advanced wheelset in every performance area, the 353 NSW also is Zipp’s first SRAM AXS-connected wheelset. Designed for racers, it’s a lightweight climber’s wheel that comes with ceramic bearings and Zipp’s most advanced rim technology for impressive durability and aero performance.The 353 NSW rim seamlessly integrates the Zipp AXS Wheel Sensor for accurate on-bike tire-pressure monitoring. It allows you to monitor and analyze tire pressure in real-time without an external device mounted to the valve stem. Fine-tuning tire pressure helps riders optimize speed and performance in an ever-changing riding environment. Before you ride, check your pressure immediately; green light means good to go. During the ride, monitor pressure to dial in your ideal setting and detect issues early.Strong just got stronger for Zipp’s lightest wheelset. A revised carbon layup and design infused the already strong 353 NSW with a more than 16 percent higher rim impact strength. With its undulating 35/40mm deep rim shape, the 353 NSW provides speed on the valley road, the mountain climb, and the descent with excellent rolling resistance, crosswind stability, and feather-light weight. The 353 NSW features the premium ZR1 SL hubset with ceramic bearings and 66 points of engagement smooth rolling. The hubset also is 30 g lighter than the predecessor hub in NSW wheels. The 353 NSW is optimized for 30mm tires, with great options available from Goodyear Fitment Series for Zipp tires made exclusively for Zipp. The 353 NSW is not approved for gravel riding. Features
Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
First integrated, connected SRAM AXS wheel with Zipp AXS Wheel Sensor, with ability to monitor pressure with specially designed tube.
ZR1 SL hubset with ceramic bearings
Optimized for 30mm tires
TSE for greater efficiency and reduced rolling resistance
Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth
Center locking rotor interface. Lockring is included with the wheels.
XDR or SRAM/Shimano driver bodies
Campagnolo driver body sold separately
Lifetime warranty
SpecificationsOrientation (wheels): FrontSize (wheels): 700cRim construction: Carbon – HooklessTyre compatibility: Tubeless tyres onlyRim depth: 40mmSurface texture: ABLC HexFinBrake compatibility: Disc (Centre Lock)Rim - inside width: 25mmRim profile: SymmetricalRim finish: UD fibre, Impress technologyNipple material: AluminiumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-Ray - BlackSpoke count: 20Spoke pattern: 2 CrossHub: ZR1 SLColour (Decal): StandardColour (hub): BlackAxle type (wheels): TA 12x100Axle material: Aluminium front & rearBearings: Cartridge - CeramicMax tyre pressure: 73psi / 5.0barMax recommended system weight: 250lbs / 114kgSpoke length DS: 276mmSpoke length NDS: 278mmMax outside width: 30mm
Zipp: Zipp’s 353 NSW Tubeless Disc brake is the pinnacle wheelset for today’s endurance rider and road racer. Zipp’s most advanced wheelset in every performance area, the 353 NSW also is Zipp’s first SRAM AXS-connected wheelset. Designed for racers, it’s a lightweight climber’s wheel that comes with ceramic bearings and Zipp’s most advanced rim technology for impressive durability and aero performance.The 353 NSW rim seamlessly integrates the Zipp AXS Wheel Sensor for accurate on-bike tire-pressure monitoring. It allows you to monitor and analyze tire pressure in real-time without an external device mounted to the valve stem. Fine-tuning tire pressure helps riders optimize speed and performance in an ever-changing riding environment. Before you ride, check your pressure immediately; green light means good to go. During the ride, monitor pressure to dial in your ideal setting and detect issues early.Strong just got stronger for Zipp’s lightest wheelset. A revised carbon layup and design infused the already strong 353 NSW with a more than 16 percent higher rim impact strength. With its undulating 35/40mm deep rim shape, the 353 NSW provides speed on the valley road, the mountain climb, and the descent with excellent rolling resistance, crosswind stability, and feather-light weight. The 353 NSW features the premium ZR1 SL hubset with ceramic bearings and 66 points of engagement smooth rolling. The hubset also is 30 g lighter than the predecessor hub in NSW wheels. The 353 NSW is optimized for 30mm tires, with great options available from Goodyear Fitment Series for Zipp tires made exclusively for Zipp. The 353 NSW is not approved for gravel riding. Features
Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
First integrated, connected SRAM AXS wheel with Zipp AXS Wheel Sensor, with ability to monitor pressure with specially designed tube.
ZR1 SL hubset with ceramic bearings
Optimized for 30mm tires
TSE for greater efficiency and reduced rolling resistance
Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth
Center locking rotor interface. Lockring is included with the wheels.
XDR or SRAM/Shimano driver bodies
Campagnolo driver body sold separately
Lifetime warranty
SpecificationsSize (wheels): 700cRim construction: Carbon – HooklessTyre compatibility: Tubeless tyres onlyRim depth: 40mmBrake compatibility: Disc (Centre Lock)Rim - inside width: 25mmRim profile: SymmetricalRim finish: UD fibre, Impress technologyNipple material: AluminiumSpoke type: CX-Ray - BlackSpoke count: 20Spoke pattern: 2 CrossDriver body type: SRAM XDR, SRAM/Shimano RoadAxle type (wheels): TA 12x100, TA 12x142Bearings: Cartridge - CeramicDriver mechanism: 6 Pawls Compression, 66 POEMax tyre pressure: 73psi / 5.0barMax recommended system weight: 250lbs / 114kgSpoke length DS: 274mm, 276mmSpoke length NDS: 276mm, 278mmMax outside width: 30mmWeight (g): 1310Weight based on: Lightest configuration: 12mm through axles and XDR body. Tape and valve included in weight.
Zipp: Zipp’s 454 NSW Tubeless Disc-brake is the ultimate road racing wheelset. This wheel delivers everything the performance cyclist demands. It’s aerodynamically efficient and stable in all wind conditions. What’s more, a wider rim is designed for tubeless tires at lower pressure for reduced rolling resistance and vibration damping, so you’ll lose as little energy as possible out on the road. For the best combination of aerodynamics and rolling resistance gains a 28mm tire is recommended on this wheel. Its undulating 58mm Sawtooth rim shape with Hyperfoils is our most aerodynamic and stable wheel.The 454 NSW features Zipp’s Total System Efficiency (TSE), our approach at combatting the biggest enemies of speed: wind resistance, gravity, rolling resistance, and vibration losses. And gravity? Zipp’s use of hookless (straight side) rims in the 454 NSW is integral to Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp’s hookless rims have more efficient resin distribution, which means lighter, stronger wheels. The 454 NSW features the premium ZR1 SL hubset with ceramic bearings and 66 points of engagement. The hubset also is 30 g lighter than the predecessor hub in NSW wheels. Features
The 454 NSW Tubeless Disc brake is roughly a pound (more than 400 grams) lighter than its predecessor!
ZR1 SL hubset with ceramic bearings
TSE™ for greater efficiency and reduced rolling resistance
Sawtooth™ rim with Hyperfoil™ nodes and HexFin™ ABLC dimple pattern for top aero and crosswind-stability performance with an undulating 53/58mm rim depth
Zipp graphics applied using Zipp’s ImPress™ direct-print technology
XDR™ or SRAM/Shimano driver bodies
Ships with 12mm front and rear end caps
Center locking rotor interface. Lockring is included with the wheels
Campagnolo driver body sold separately
1400 g
Lifetime warranty
SpecificationsOrientation (wheels): FrontSize (wheels): 700cRim construction: Carbon – HooklessTyre compatibility: Tubeless tyres onlyRim depth: 58mmSurface texture: ABLC SawToothBrake compatibility: Disc (Centre Lock)Rim - inside width: 23mmRim profile: SymmetricalRim finish: UD fibre, Impress technologyNipple material: AluminiumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-Ray - BlackSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 SLColour (Decal): StandardColour (hub): BlackAxle type (wheels): TA 12x100Axle material: Aluminium front & rearBearings: Cartridge - CeramicMax tyre pressure: 73psi / 5.0barMax recommended system weight: 250lbs / 114kgSpoke length DS: 254mmSpoke length NDS: 256mmMax outside width: 28mm
Zipp: Zipp’s 454 NSW Tubeless Disc-brake is the ultimate road racing wheelset. This wheel delivers everything the performance cyclist demands. It’s aerodynamically efficient and stable in all wind conditions. What’s more, a wider rim is designed for tubeless tires at lower pressure for reduced rolling resistance and vibration damping, so you’ll lose as little energy as possible out on the road. For the best combination of aerodynamics and rolling resistance gains a 28mm tire is recommended on this wheel. Its undulating 58mm Sawtooth rim shape with Hyperfoils is our most aerodynamic and stable wheel.The 454 NSW features Zipp’s Total System Efficiency (TSE), our approach at combatting the biggest enemies of speed: wind resistance, gravity, rolling resistance, and vibration losses. And gravity? Zipp’s use of hookless (straight side) rims in the 454 NSW is integral to Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp’s hookless rims have more efficient resin distribution, which means lighter, stronger wheels. The 454 NSW features the premium ZR1 SL hubset with ceramic bearings and 66 points of engagement. The hubset also is 30 g lighter than the predecessor hub in NSW wheels. Features
The 454 NSW Tubeless Disc brake is roughly a pound (more than 400 grams) lighter than its predecessor!
ZR1 SL hubset with ceramic bearings
TSE™ for greater efficiency and reduced rolling resistance
Sawtooth™ rim with Hyperfoil™ nodes and HexFin™ ABLC dimple pattern for top aero and crosswind-stability performance with an undulating 53/58mm rim depth
Zipp graphics applied using Zipp’s ImPress™ direct-print technology
Ships with 12mm front and rear end caps
Center locking rotor interface. Lockring is included with the wheels
Campagnolo driver body sold separately
1400g
Lifetime warranty
SpecificationsOrientation (wheels): RearSize (wheels): 700cRim construction: Carbon – HooklessTyre compatibility: Tubeless tyres onlyRim depth: 58mmSurface texture: ABLC SawToothBrake compatibility: Disc (Centre Lock)Rim - inside width: 23mmRim profile: SymmetricalRim finish: UD fibre, Impress technologyNipple material: AluminiumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-Ray - BlackSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 SLDriver body type: SRAM/Shimano RoadColour (Decal): StandardColour (hub): BlackAxle type (wheels): TA 12x142Axle material: Aluminium front & rearBearings: Cartridge - CeramicDriver mechanism: 6 Pawls Compression, 66 POEDriver body material: AluminiumMax tyre pressure: 73psi / 5.0barMax recommended system weight: 250lbs / 114kgSpoke length DS: 252mmSpoke length NDS: 256mmMax outside width: 28mm
Zipp: Zipp’s ultimate aero weapon is faster than ever, thanks to our proprietary Total System Efficiency technology. With TSE, the 858 NSW Carbon Tubeless Disc-brake wheelset features a tubeless and hookless rim profile for seamless tire interface and huge drop in weight. The 858 gives you the benefits of our deep rims at weight typically associated with rims that are 20mm shallower. The wheel’s internal width is 23mm, ideal for running wider tires with lower pressures for decreased rolling resistance. That’s how TSE technology helps you conquer the four barriers to speed: Wind Resistance, Gravity, Rolling Resistance, and Vibration Losses. The 858 NSW’s undulating 82mm-85mm deep rim shape, our patented Sawtooth profile, is our highest performing design for aero efficiency and crosswind stability. The result is the pure speed, especially for triathletes, time trial specialist, and any other speed freak. What’s more, while this wheelset is optimized for tubeless tires, you still have the option to run tubeless ready tires with tubes.The 858 NSW is fastest with a 28mm tire. In triathlon, running wider tubeless tires at lower pressure makes you faster while also smoothing out the ride so your body is fresher for the run. Disc brakes also offer more reliable speed modulation and braking power in all weather conditions. The 858 NSW features the premium ZR1 SL hubset with ceramic bearings and 66 points of engagement. Features
Zipp’s most advanced and fastest deep-rim wheel for road, triathlon, and time trialing
More than 243 grams lighter that previous model
Optimized tire bed for easy tire installation
TSE for greater efficiency and reduced rolling resistance
Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth
ZR1 SL hubset with ceramic bearings
Ships with 12mm front and rear end caps
Center locking rotor interface. Lockring is included with the wheels
XDR or SRAM/Shimano driver bodies
Zipp graphics applied using Zipp’s ImPress direct-print technology
Minimum 25mm tire width
Campagnolo driver body sold separately
1500 g
Lifetime Warranty
SpecificationsSize (wheels): 700cRim construction: Carbon – HooklessTyre compatibility: Tubeless tyres onlyRim depth: 85mmBrake compatibility: Disc (Centre Lock)Rim - inside width: 23mmRim profile: SymmetricalRim finish: UD fibre, Impress technologyNipple material: AluminiumSpoke type: CX-Ray - BlackSpoke count: 20Spoke pattern: 2 Cross, Radial drive, 2 Cross non-driveDriver body type: SRAM XDR, SRAM/Shimano RoadAxle type (wheels): TA 12x100, TA 12x142Bearings: Cartridge - CeramicDriver mechanism: 6 Pawls Compression, 66 POEMax tyre pressure: 73psi / 5.0barMax recommended system weight: 250lbs / 114kgSpoke length DS: 220mm, 230mmSpoke length NDS: 232mmMax outside width: 27mm
Zipp: Zipp’s ultimate aero weapon is faster than ever, thanks to our proprietary Total System Efficiency technology. With TSE, the 858 NSW Carbon Tubeless Disc-brake wheelset features a tubeless and hookless rim profile for seamless tire interface and huge drop in weight. The 858 gives you the benefits of our deep rims at weight typically associated with rims that are 20mm shallower. The wheel’s internal width is 23mm, ideal for running wider tires with lower pressures for decreased rolling resistance. That’s how TSE technology helps you conquer the four barriers to speed: Wind Resistance, Gravity, Rolling Resistance, and Vibration Losses. The 858 NSW’s undulating 82mm-85mm deep rim shape, our patented Sawtooth profile, is our highest performing design for aero efficiency and crosswind stability. The result is the pure speed, especially for triathletes, time trial specialist, and any other speed freak. What’s more, while this wheelset is optimized for tubeless tires, you still have the option to run tubeless ready tires with tubes.The 858 NSW is fastest with a 28mm tire. In triathlon, running wider tubeless tires at lower pressure makes you faster while also smoothing out the ride so your body is fresher for the run. Disc brakes also offer more reliable speed modulation and braking power in all weather conditions. The 858 NSW features the premium ZR1 SL hubset with ceramic bearings and 66 points of engagement. Features
Zipp’s most advanced and fastest deep-rim wheel for road, triathlon, and time trialing
More than 243 grams lighter that previous model
Optimized tire bed for easy tire installation
TSE for greater efficiency and reduced rolling resistance
Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth
ZR1 SL hubset with ceramic bearings
Ships with 12mm front and rear end caps
Center locking rotor interface. Lockring is included with the wheels
XDR or SRAM/Shimano driver bodies
Zipp graphics applied using Zipp’s ImPress direct-print technology
Minimum 25mm tire width
Campagnolo driver body sold separately
1500 g
Lifetime Warranty
SpecificationsSize (wheels): 700cRim construction: Carbon – HooklessTyre compatibility: Tubeless tyres onlyRim depth: 85mmBrake compatibility: Disc (Centre Lock)Rim - inside width: 23mmRim profile: SymmetricalRim finish: UD fibre, Impress technologyNipple material: AluminiumSpoke type: CX-Ray - BlackSpoke count: 20Spoke pattern: 2 Cross, Radial drive, 2 Cross non-driveDriver body type: SRAM XDR, SRAM/Shimano RoadAxle type (wheels): TA 12x100, TA 12x142Bearings: Cartridge - CeramicDriver mechanism: 6 Pawls Compression, 66 POEMax tyre pressure: 73psi / 5.0barMax recommended system weight: 250lbs / 114kgSpoke length DS: 220mm, 230mmSpoke length NDS: 232mmMax outside width: 27mm
Zipp: PURE TRAIL SPEED. INSPIRED BY MOTO.Zipp’s new 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology™, allows the rims to “pivot” from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed THINGS TO REMEMBER
Moto Inspired. Control + Durability = Speed
Each wheel includes TyreWiz tire-pressure monitoring device
Speed Line™ graphics in your choice of 8 colors
Zipp logo graphic available in Chrome or Slate
Single-wall design we call Moto Technology
Available as a wheelset or rims
Lifetime warranty
FEATURES AND BENEFITS
Higher impact resistance
Reduced chance of pinch flatting
More traction in rough corners
More traction in rough corners
Smoother ride in rocky terrain
Ability to run lower tire pressure
Reduced rider fatigue
TyreWiz tire-pressure monitoring device
Frustration-free tire installation
Rim is designed for compliance, creating the feel of extra suspension
SPECIFICATIONS
Size (wheels): 27.5", 29"
Rim construction: Carbon
Tire compatibility: Clincher Tubeless Ready
Rim width: 37.5mm
Rim - inside width: 30mm
Rim finish: NCF, adhesive decals
Rim profile: Asymmetrical
ERD: 575.60mm, 613.40mm
Zipp: PURE TRAIL SPEED. INSPIRED BY MOTO.Zipp’s new 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology™, allows the rims to “pivot” from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed THINGS TO REMEMBER
Moto Inspired. Control + Durability = Speed
Each wheel includes TyreWiz tire-pressure monitoring device
Speed Line™ graphics in your choice of 8 colors
Zipp logo graphic available in Chrome or Slate
Single-wall design we call Moto Technology
Available as a wheelset or rims
Lifetime warranty
FEATURES AND BENEFITS
Higher impact resistance
Reduced chance of pinch flatting
More traction in rough corners
More traction in rough corners
Smoother ride in rocky terrain
Ability to run lower tire pressure
Reduced rider fatigue
TyreWiz tire-pressure monitoring device
Frustration-free tire installation
Rim is designed for compliance, creating the feel of extra suspension
SPECIFICATIONS
Size (wheels): 27.5", 29"
Rim construction: Carbon
Tire compatibility: Clincher Tubeless Ready
Rim width: 37.5mm
Rim - inside width: 30mm
Rim finish: NCF, adhesive decals
Rim profile: Asymmetrical
ERD: 575.60mm, 613.40mm
Zipp: PURE TRAIL SPEED. INSPIRED BY MOTO.Zipp’s new 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology™, allows the rims to “pivot” from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed THINGS TO REMEMBER
Moto Inspired. Control + Durability = Speed
Each wheel includes TyreWiz tire-pressure monitoring device
Speed Line™ graphics in your choice of 8 colors
Zipp logo graphic available in Chrome or Slate
Single-wall design we call Moto Technology
Available as a wheelset or rims
Lifetime warranty
FEATURES AND BENEFITS
Higher impact resistance
Reduced chance of pinch flatting
More traction in rough corners
More traction in rough corners
Smoother ride in rocky terrain
Ability to run lower tire pressure
Reduced rider fatigue
TyreWiz tire-pressure monitoring device
Frustration-free tire installation
Rim is designed for compliance, creating the feel of extra suspension
SPECIFICATIONS
Size (wheels): 27.5", 29"
Rim construction: Carbon
Tire compatibility: Clincher Tubeless Ready
Rim width: 37.5mm
Rim - inside width: 30mm
Rim finish: NCF, adhesive decals
Rim profile: Asymmetrical
ERD: 575.60mm, 613.40mm
Zipp: PURE TRAIL SPEED Zipp’s 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. Already this wheelset and its MOTO Technology are proven with multiple victories in the Enduro World Series with our pioneering partnership with Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp’s Moto Technology’s single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call “ankle compliance.” Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub’s improved seal design means better durability on rough terrain. Quarq’s TyreWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. Zipp’s Speed Line graphics give you the choice of five colors for a wheel with high-performance aesthetics.FEATURES
Higher impact resistance
Reduced chance of pinch flatting
More traction in rough corners
Smoother ride in rocky terrain
Ability to run lower tire pressure
Reduced rider fatigue
Frustration-free tire installation
Rim is designed for compliance, creating the feel of extra suspension
German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability
Lifetime Warranty
SPECIFICATIONSOrientation (wheels): FrontSize (wheels): 27.5"Rim construction: Carbon – HooklessTire compatibility: Tubeless tires onlyRim depth: n/aSurface texture: SmoothBrake compatibility: Disc (6-bolt)Rim - inside width: 30mmRim profile: AsymmetricalRim finish: NCF carbon, adhesive decalsNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 32Spoke pattern: 3 CrossHub: ZM2Driver body type: n/aAxle type (Wheels): TA 15x110 Torque Caps (dia. 31mm)Axle material: Aluminum front & rearBearings: Cartridge - SteelDriver Mechanism: n/aDriver body material: n/aMax tire pressure: 65psiMax recommended rider weight: 250lbsSpoke Length DS: 280mmSpoke Length NDS: 284mmMax outside width: 37.5mm
Zipp: PURE TRAIL SPEED Zipp’s 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. Already this wheelset and its MOTO Technology are proven with multiple victories in the Enduro World Series with our pioneering partnership with Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp’s Moto Technology’s single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call “ankle compliance.” Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub’s improved seal design means better durability on rough terrain. Quarq’s TyreWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. Zipp’s Speed Line graphics give you the choice of five colors for a wheel with high-performance aesthetics.FEATURES
Higher impact resistance
Reduced chance of pinch flatting
More traction in rough corners
Smoother ride in rocky terrain
Ability to run lower tire pressure
Reduced rider fatigue
Frustration-free tire installation
Rim is designed for compliance, creating the feel of extra suspension
German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability
Lifetime Warranty
SPECIFICATIONSOrientation (wheels): FrontSize (wheels): 29"Rim construction: Carbon – HooklessTire compatibility: Tubeless tires onlyRim depth: n/aSurface texture: SmoothBrake compatibility: Disc (6-bolt)Rim - inside width: 30mmRim profile: AsymmetricalRim finish: NCF carbon, adhesive decalsNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 32Spoke pattern: 3 CrossHub: ZM2Driver body type: n/aColor (hub): BlackAxle type (Wheels): TA 15x110 Torque Caps (dia. 31mm)Axle material: Aluminum front & rearBearings: Cartridge - SteelDriver Mechanism: n/aDriver body material: n/aMax tire pressure: 65psiMax recommended rider weight: 250lbsSpoke Length DS: 302mmSpoke Length NDS: 298mmMax outside width: 37.5mm
Zipp: PURE TRAIL SPEED Zipp’s 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. Already this wheelset and its MOTO Technology are proven with multiple victories in the Enduro World Series with our pioneering partnership with Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp’s Moto Technology’s single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call “ankle compliance.” Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub’s improved seal design means better durability on rough terrain. Quarq’s TyreWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. Zipp’s Speed Line graphics give you the choice of five colors for a wheel with high-performance aesthetics.FEATURES
Higher impact resistance
Reduced chance of pinch flatting
More traction in rough corners
Smoother ride in rocky terrain
Ability to run lower tire pressure
Reduced rider fatigue
Frustration-free tire installation
Rim is designed for compliance, creating the feel of extra suspension
German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability
Lifetime Warranty
SPECIFICATIONSOrientation (wheels): RearSize (wheels): 29"Rim construction: Carbon – HooklessTire compatibility: Tubeless tires onlyRim depth: n/aSurface texture: SmoothBrake compatibility: Disc (6-bolt)Rim - inside width: 30mmRim profile: AsymmetricalRim finish: NCF carbon, adhesive decalsNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 32Spoke pattern: 3 CrossHub: ZM2Driver body type: SRAM/Shimano MTBColor (hub): BlackAxle type (Wheels): TA 12x148Axle material: Aluminum front & rearBearings: Cartridge - SteelDriver Mechanism: 12 Pawls Leaf Spring, 132 POEDriver body material: AluminumMax tire pressure: 65psiMax recommended rider weight: 250lbsSpoke Length DS: 298mmSpoke Length NDS: 302mmMax outside width: 37.5mm
Zipp: PURE TRAIL SPEED Zipp’s 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. Already this wheelset and its MOTO Technology are proven with multiple victories in the Enduro World Series with our pioneering partnership with Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp’s Moto Technology’s single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call “ankle compliance.” Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub’s improved seal design means better durability on rough terrain. Quarq’s TyreWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. Zipp’s Speed Line graphics give you the choice of five colors for a wheel with high-performance aesthetics.FEATURES
Higher impact resistance
Reduced chance of pinch flatting
More traction in rough corners
Smoother ride in rocky terrain
Ability to run lower tire pressure
Reduced rider fatigue
Frustration-free tire installation
Rim is designed for compliance, creating the feel of extra suspension
German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability
Lifetime Warranty
SPECIFICATIONSOrientation (wheels): RearSize (wheels): 29"Rim construction: Carbon – HooklessTire compatibility: Tubeless tires onlyRim depth: n/aSurface texture: SmoothBrake compatibility: Disc (6-bolt)Rim - inside width: 30mmRim profile: AsymmetricalRim finish: NCF carbon, adhesive decalsNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 32Spoke pattern: 3 CrossHub: ZM2Driver body type: SRAM XDColor (hub): BlackAxle type (Wheels): TA 12x148Axle material: Aluminum front & rearBearings: Cartridge - SteelDriver Mechanism: 12 Pawls Leaf Spring, 132 POEDriver body material: AluminumMax tire pressure: 65psiMax recommended rider weight: 250lbsSpoke Length DS: 298mmSpoke Length NDS: 302mmMax outside width: 37.5mm
Zipp: Riding is believing with the Zipp 1ZERO HiTOP SW MTB wheelset. With modern cross-country courses becoming rougher and more challenging, trail compliance is vital. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1ZERO HiTOP SW carbon rim's design complies with the terrain thanks to Zipp's proprietary HiTOP Technology for carbon layup. The result is a lightweight XC wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. You don’t have to work hard to spin it up to speed or fight your bike when things get chunky. The 1ZERO HiTOP SW also comes with the TyreWiz tire-pressure monitoring system, so you'll always have your tire pressure dialed in for optimal performance. The 1ZERO HiTOP SW is smooth running with the ZM2 SL hubset with its 66 points of engagement.FEATURES
HiTOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough
Low weight for effortless accelerations and climbing
Wide lips on top of the rim provide a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit
ZM2 SL hub with 66 points of engagement
Standard or Torque Cap options on front hub
XD or Microspline drive-body options
Graphics match SRAM's new XX, X0 drivetrains, and RockShox
SPECIFICATIONSOrientation (wheels): FrontSize (wheels): 29"Rim construction: Carbon – HooklessTire compatibility: Tube-type or Tubeless tiresRim depth: 21.2mmSurface texture: SmoothBrake compatibility: Disc (Center Lock)Rim - inside width: 30mmRim profile: AsymmetricalRim finish: UD fiber, Bake-On labelsColour (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-Ray - BlackSpoke count: 24Spoke pattern: 2 CrossHub: ZM2 SLDriver body type: n/aColor (hub): Black / SilverAxle type (Wheels): TA 15x110 Torque Caps (dia. 31mm)Axle material: Aluminum front & rearBearings: Cartridge - SteelDriver Mechanism: n/aDriver body material: n/aMax tire pressure: 50psi/3.45barMax recommended system weight: 286lbs/130kgSpoke Length DS: 294mmSpoke Length NDS: 290mmMax outside width: 37.7mm
Zipp: Riding is believing with the Zipp 1ZERO HiTOP SW MTB wheelset. With modern cross-country courses becoming rougher and more challenging, trail compliance is vital. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1ZERO HiTOP SW carbon rim's design complies with the terrain thanks to Zipp's proprietary HiTOP Technology for carbon layup. The result is a lightweight XC wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. You don’t have to work hard to spin it up to speed or fight your bike when things get chunky. The 1ZERO HiTOP SW also comes with the TyreWiz tire-pressure monitoring system, so you'll always have your tire pressure dialed in for optimal performance. The 1ZERO HiTOP SW is smooth running with the ZM2 SL hubset with its 66 points of engagement.FEATURES
HiTOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough
Low weight for effortless accelerations and climbing
Wide lips on top of the rim provide a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit
ZM2 SL hub with 66 points of engagement
Standard or Torque Cap options on front hub
XD or Microspline drive-body options
Graphics match SRAM's new XX, X0 drivetrains, and RockShox
SPECIFICATIONSOrientation (wheels): FrontSize (wheels): 29"Rim construction: Carbon – HooklessTire compatibility: Tube-type or Tubeless tiresRim depth: 21.2mmSurface texture: SmoothBrake compatibility: Disc (Center Lock)Rim - inside width: 30mmRim profile: AsymmetricalRim finish: UD fiber, Bake-On labelsColor (Decal): BlueNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-Ray - BlackSpoke count: 24Spoke pattern: 2 CrossHub: ZM2 SLDriver body type: n/aColor (hub): Black / SilverAxle type (Wheels): TA 15x110 Torque Caps (dia. 31mm)Axle material: Aluminum front & rearBearings: Cartridge - SteelDriver Mechanism: n/aDriver body material: n/aMax tire pressure: 50psi/3.45barMax recommended system weight: 286lbs/130kgSpoke Length DS: 294mmSpoke Length NDS: 290mmMax outside width: 37.7mm
Zipp: Riding is believing with the Zipp 1ZERO HiTOP SW MTB wheelset. With modern cross-country courses becoming rougher and more challenging, trail compliance is vital. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1ZERO HiTOP SW carbon rim's design complies with the terrain thanks to Zipp's proprietary HiTOP Technology for carbon layup. The result is a lightweight XC wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. You don’t have to work hard to spin it up to speed or fight your bike when things get chunky. The 1ZERO HiTOP SW also comes with the TyreWiz tire-pressure monitoring system, so you'll always have your tire pressure dialed in for optimal performance. The 1ZERO HiTOP SW is smooth running with the ZM2 SL hubset with its 66 points of engagement.FEATURES
HiTOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough
Low weight for effortless accelerations and climbing
Wide lips on top of the rim provide a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit
ZM2 SL hub with 66 points of engagement
Standard or Torque Cap options on front hub
XD or Microspline drive-body options
Graphics match SRAM's new XX, X0 drivetrains, and RockShox
SPECIFICATIONSOrientation (wheels): RearSize (wheels): 29"Rim construction: Carbon – HooklessTire compatibility: Tube-type or Tubeless tiresRim depth: 21.2mmSurface texture: SmoothBrake compatibility: Disc (Center Lock)Rim - inside width: 30mmRim profile: AsymmetricalRim finish: UD fiber, Bake-On labelsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-Ray - BlackSpoke count: 24Spoke pattern: 2 CrossHub: ZM2 SLDriver body type: 00.1918.720.000- SRAM XD, 00.1918.720.002 - MicrosplineColor (hub): Black / SilverAxle type (Wheels): TA 12x148Axle material: Aluminum front & rearBearings: Cartridge - SteelDriver Mechanism: 6 Pawls Compression, 66 POEDriver body material: AluminumMax tire pressure: 50psi/3.45barMax recommended system weight: 286lbs/130kgSpoke Length DS: 286mmSpoke Length NDS: 290mmMax outside width: 37.7mm
Zipp: Riding is believing with the Zipp 1ZERO HiTOP SW MTB wheelset. With modern cross-country courses becoming rougher and more challenging, trail compliance is vital. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1ZERO HiTOP SW carbon rim's design complies with the terrain thanks to Zipp's proprietary HiTOP Technology for carbon layup. The result is a lightweight XC wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. You don’t have to work hard to spin it up to speed or fight your bike when things get chunky. The 1ZERO HiTOP SW also comes with the TyreWiz tire-pressure monitoring system, so you'll always have your tire pressure dialed in for optimal performance. The 1ZERO HiTOP SW is smooth running with the ZM2 SL hubset with its 66 points of engagement.FEATURES
HiTOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough
Low weight for effortless accelerations and climbing
Wide lips on top of the rim provide a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit
ZM2 SL hub with 66 points of engagement
Standard or Torque Cap options on front hub
XD or Microspline drive-body options
Graphics match SRAM's new XX, X0 drivetrains, and RockShox
SPECIFICATIONSOrientation (wheels): RearSize (wheels): 29"Rim construction: Carbon – HooklessTire compatibility: Tube-type or Tubeless tiresRim depth: 21.2mmSurface texture: SmoothBrake compatibility: Disc (Center Lock)Rim - inside width: 30mmRim profile: AsymmetricalRim finish: UD fiber, Bake-On labelsColor (Decal): BlueNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-Ray - BlackSpoke count: 24Spoke pattern: 2 CrossHub: ZM2 SLDriver body type: SRAM XDColor (hub): Black / SilverAxle type (Wheels): TA 12x148Axle material: Aluminum front & rearBearings: Cartridge - SteelDriver Mechanism: 6 Pawls Compression, 66 POEDriver body material: AluminumMax tire pressure: 50psi/3.45barMax recommended system weight: 286lbs/130kgSpoke Length DS: 286mmSpoke Length NDS: 290mmMax outside width: 37.7mm
Zipp: Zipp’s HiTOP S MTB wheelset melds high value with high performance for a simply better ride.With modern cross-country courses becoming rougher and more challenging, trail compliance is vital. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1ZERO HiTOP S carbon rim’s design complies with the terrain thanks to Zipp's proprietary HiTOP Technology for carbon layup. The result is a light XC wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. The 1ZERO HiTOP S features the dependable ZM 900 hubset.FEATURES
HiTOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough
Low weight for effortless accelerations and climbing
Wide lips on top of the rim provide a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit
ZM 900 SL hub with 52 points of engagement
Standard or Torque Cap options on front hub
XD or Microspline drive-body options
TyreWiz sold separately
SPECIFICATIONSOrientation (wheels): FrontSize (wheels): 29"Rim construction: Carbon – HooklessTire compatibility: Tube-type or Tubeless tiresRim depth: 21.2mmSurface texture: SmoothBrake compatibility: Disc (6-bolt)Rim - inside width: 30mmRim profile: AsymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHub: ZM 900Driver body type: n/aColor (hub): BlackAxle type (Wheels): TA 15x110 Torque Caps (dia. 31mm)Axle material: Aluminum front & rearBearings: Cartridge - SteelDriver Mechanism: n/aDriver body material: n/aMax tire pressure: 50psi/3.45barMax recommended system weight: 286lbs/130kgSpoke Length DS: 292mmSpoke Length NDS: 288mmMax outside width: 37.7mm
Zipp: OVERVIEWZipp’s HiTOP S MTB wheelset melds high value with high performance for a simply better ride.With modern cross-country courses becoming rougher and more challenging, trail compliance is vital. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1ZERO HiTOP S carbon rim’s design complies with the terrain thanks to Zipp's proprietary HiTOP Technology for carbon layup. The result is a light XC wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. The 1ZERO HiTOP S features the dependable ZM 900 hubset.FEATURES
HiTOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough
Low weight for effortless accelerations and climbing
Wide lips on top of the rim provide a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit
ZM 900 SL hub with 52 points of engagement
Standard or Torque Cap options on front hub
XD or Microspline drive-body options
TyreWiz sold separately
SPECIFICATIONS Orientation (wheels) RearSize (wheels) 29"Rim construction Carbon – HooklessTire compatibility Tube-type or Tubeless tiresRim depth 21.2mmSurface texture SmoothBrake compatibility Disc (6-bolt)Rim - inside width 30mmRim profile AsymmetricalRim finish UD fiber, adhesive decalsColour (Decal) StandardNipple material AluminumNipple anti-rotation Sapim Secure-LocSpoke type CX-SprintSpoke count 24Spoke pattern 2 CrossHub ZM 900Driver body type 00.1918.722.000 - SRAM XD, 00.1918.722.001 - MicrosplineColour (hub) BlackAxle type (Wheels) TA 12x148Axle material Aluminum front & rearBearings Cartridge - SteelDriver Mechanism 4 Pawls Leaf Spring, 52 POEDriver body material AluminumMax tire pressure 50psi/3.45barMax recommended system weight 286lbs/130kgSpoke Length DS 288mmSpoke Length NDS 290mmMax outside width 37.7mm
Ritchey: Tom Ritchey believes in high quality aluminum road wheels because they offer incredible performance and durability that’s hard to beat at any price. He designed the critically acclaimed Zeta to be wide, light and laterally stiff—perfect for a great road riding experience, yet still tough enough to endure gravel road rides and cyclocross races that would chew lesser wheels to pieces. Updated for 2024 with a 4-pawl freewheel and DT Competition spokes, the tubeless-ready Classic Zeta Disc wheels combine decades of historic ride-proven research, testing with modern standards, and a sophisticated aesthetic to deliver the legendary Ritchey ride quality at an attainable price.Each Zeta wheel set is hand built by a qualified Ritchey wheel technicianRear OCR® (Off Center Rim) design reduces wheel dish to balance spoke tension for a stronger, stiffer wheel Tom Ritchey believes in high quality aluminum road wheels because they offer incredible performance and durability that’s hard to beat at any price. He designed the critically acclaimed Zeta to be wider, lighter and laterally stiffer—perfect for a great road riding experience, yet still tough enough to endure gravel road rides and cyclocross races that would chew lesser wheels to pieces. Combining decades of historic ride-proven research and testing with modern standards, the Zeta Disc is now available in a tubeless-ready Classic finish version that is sure to add a timeless aesthetic to any build. Each Zeta wheelset is hand-built by a qualified wheel technician. OCR® rims design (Off Center Rim) reduces wheel dish to balance spoke tension for a stronger, stiffer wheel. TECH SPECS
Rims alloy Tubeless Ready - OCR 3mm offset
Rim diameter 700c
Rim depth 23.4mm
Outer rim width 24.4 mm
Inner rim width 19.5mm
Suggested tire size range 25-40mm
Hubs forged disc thru-axle hubs and sealed bearings
Hub spacing 100x12mm front / 142x12mm rear
Axle Compatibility thru-axle (12mm) - standard quick release (conversion kits available separately)
Freewheel patented 6-pawl, 12-point micro-clutch engagement system
Freehub material alloy
Freehub options Shimano / SRAM XD-Road
Compatibility Shimano 9/10/11-speed and 12-speed road cassette - SRAM XD/XDR (freehub conversion kits available separately)
Disc brake compatibility 6-bolts
Spokes DT Competition 2.0/1.8 double butted / silver
Front 24 spokes / 12x283mm / 12x285mm / 2x lacing
Rear 24 spokes / 12x283mm / 12x285mm / 2x lacing
Nipples 2.0 brass 12mm / silver
Weight 1750g/set
Colour high-polish silver
Do not use sealants containing ammonia
