The Crankbrothers Synthesis XCT 11 Carbon tuned wheel system is designed to provide ultimate control and stability for XC and light trail riding and racing. Rim design, spoke gauge and spoke count are formulated specifically for the front or rear wheel, providing compliance up front and stability out back. The result? A fast-rolling, lightweight wheel system that features intuitive handling and durability for use beyond just race day.Details:
Tuned Front and Rear Carbon Wheel System for XC and trail riding and racing.
Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.
Compliant tuned front wheel improves handling and maximizes grip and control in turns.
Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed.
Rims covered by lifetime warranty.
Specs:
Compatibility - Tubeless ready / compatible
Engagement - 0.52º
Hub - Industry Nine Hydra
Hub Type - 6 Bolt
Inner Rim Width - 24.5mm
Outer Rim Width - 29.5mm
Rim Height - 19mm
Spoke Count - 32
Spokes - Sapim CX-Ray
Weight - 859g
Warranty - Lifetime (rim only)
Front-end ComplianceSynthesis XCT Carbon front rims feature a bespoke rim profile, internal width, and carbon layup to provide lateral and vertical compliance characteristics where you need it most. Plow through rock gardens and root sections with increased directional control and reduced unwanted torsional feedback through the handlebars. And, a wider internal 26.5mm internal width allows for a large tire contact patch, resulting in more grip and confidence on the trail.Rear-end StabilitySynthesis XCT Carbon rear rims feature a reinforced rim profile and carbon layup to provide additional stiffness and stability when loaded hard into corners, and also results in a robust wheel with superior impact resistance. A slimmed down internal width of 24.5mm allows for a fast-rolling tire profile relative to the front rim for pedaling efficiency.Ultra-Quick EngagementOur 11-series Synthesis wheels feature Industry Nine's revolutionary Hydra hubs, with a near-instantaneous 0.52° engagement to tackle technical climbs and transfer power to the trail without hesitation. Produced from start to finish in Asheville, North Carolina, Hydra hub shells, axles and endcaps are machined from bar stock 7075-T6 and feature high-quality Enduro® sealed cartridge bearings. It's groundbreaking pawl-based drive system is precision crafted from hardened A2 tool steel. Finally, a gloss-black anodization process with laser-etched Crankbrothers and Industry Nine logos keep things classy. Quality ComponentsAll Synthesis wheels are crafted with quality J-bend spokes from Sapim that are hand-selected for each wheel system's intended riding application - in the case of our XCT 11 wheel system, we choose Sapim's bladed CX-Ray spokes front and rear for compliance and weight savings without skimping on strength.
PUSH YOUR LIMITS TO THE HIGHEST PEAKSNo doubt the RAW 33 will make you perform like the king of the mountains. Every detail is driven to ride faster, easier and more efficient. Especially when it goes uphill. First of all we mention the low weight of only 1350 grams for the pair of wheels.Next to the low weight the carbon spokes deliver perfect balanced stiffness which forces the wheels to move fast forward when standing on the pedals.CUSTOM HUBS WITH CERAMICSPEED INSIDECarbon spokes ask for a special hub design. These level of wheels ask for ceramic bearings. For our custom designed hubs we partnered with CeramicSpeed.CeramicSpeed bearings elevate the performance of the wheels in terms of weight, durability and minimum rolling resistance. As usual this FFWD hub always has an internal ratchet system which enriches the level of performance.Completely new in this top notch family is the option to choose your finish. Within the minimalistic design you can choose an classic matt or exclusive and realy stylish glossy finish. Depending on the best combination with your bike or personal preference you can make yourself really stand out.
Rim height: 33mm;
Internal rim width: 21mm;
Hubs: FFWD CS2;
Brake Type: Centrelock Disc;
Weight: 1,350g;
Weight limit: 120kg;
Max tire pressure: 120psi;
3 year warranty;
Hand built in Holland;Â
Where Comfort Meets Performance.Drawing inspiration from Synthesis mountain bike wheels, crankbrothers new gravel wheelsets are engineered to deliver an unparalleled riding experience, even on the most challenging terrain. Designed with compliance in mind, crankbrothers Synthesis Gravel wheels offer a smooth and comfortable ride thanks to their wider rim profile.With enhanced stability and traction, Synthesis Gravel wheels provide optimal performance for adventurous gravel rides that demand durability and reliability. These wheelsets are crafted to last, making them excellent for long-distance rides and rugged adventures.Wheels sold individually not in sets.Tuned Alloy Wheel System for gravel riding on even the most challenging terrain.Compliant tuned front and rear wheels improve handling and maximize grip and control in turns.Wide 26.5mm inner rim width optimized to support tires from 40mm-48mm, providing increased tire volume and contact patch for maximized grip in turns, while also adding sidewall stability.Welded and sleeved rim joint for additional strength. Specs
COMPATIBILITY: Tubeless ready / compatible
ENGAGEMENT: 17º
HUB: Synthesis Standard
HUB TYPE: Centerlock
AXLE SPACING: 142x12mm TA
RIM MATERIAL: 6013 T6 Alloy
MIN/MAX TIRE SIZE: 30-55mm
INNER RIM WIDTH: 26.5mm
OUTER RIM WIDTH: 31mm
RIM HEIGHT: 21mm
SPOKE COUNT: 28
SPOKES: Sapim D-Light
WEIGHT PER SET: 1769g (650B), 1917g (700C)
WARRANTY: 2 years (rim only)
E-BIKE COMPATIBILITY: No
Where Comfort Meets Performance.Drawing inspiration from Synthesis mountain bike wheels, crankbrothers new gravel wheelsets are engineered to deliver an unparalleled riding experience, even on the most challenging terrain. Designed with compliance in mind, crankbrothers Synthesis Gravel wheels offer a smooth and comfortable ride thanks to their wider rim profile.With enhanced stability and traction, Synthesis Gravel wheels provide optimal performance for adventurous gravel rides that demand durability and reliability. These wheelsets are crafted to last, making them excellent for long-distance rides and rugged adventures.Wheels sold individually not in sets.Tuned Alloy Wheel System for gravel riding on even the most challenging terrain.Compliant tuned front and rear wheels improve handling and maximize grip and control in turns.Wide 26.5mm inner rim width optimized to support tires from 40mm-48mm, providing increased tire volume and contact patch for maximized grip in turns, while also adding sidewall stability.Welded and sleeved rim joint for additional strength. Specs
COMPATIBILITY: Tubeless ready / compatible
ENGAGEMENT: 17º
HUB: Synthesis Standard
HUB TYPE: Centerlock
AXLE SPACING: 142x12mm TA
RIM MATERIAL: 6013 T6 Alloy
MIN/MAX TIRE SIZE: 30-55mm
INNER RIM WIDTH: 26.5mm
OUTER RIM WIDTH: 31mm
RIM HEIGHT: 21mm
SPOKE COUNT: 28
SPOKES: Sapim D-Light
WEIGHT PER SET: 1769g (650B), 1917g (700C)
WARRANTY: 2 years (rim only)
E-BIKE COMPATIBILITY: No
Where Comfort Meets Performance.Drawing inspiration from Synthesis mountain bike wheels, crankbrothers new gravel wheelsets are engineered to deliver an unparalleled riding experience, even on the most challenging terrain. Designed with compliance in mind, crankbrothers Synthesis Gravel wheels offer a smooth and comfortable ride thanks to their wider rim profile.With enhanced stability and traction, Synthesis Gravel wheels provide optimal performance for adventurous gravel rides that demand durability and reliability. These wheelsets are crafted to last, making them excellent for long-distance rides and rugged adventures.Wheels sold individually not in sets.Tuned Carbon Wheel System for gravel riding on even the most challenging terrain.Compliant tuned front and rear wheels improve handling and maximize grip and control in turns.Wide 26.5mm inner rim width optimized to support tires from 40mm-48mm, providing increased tire volume and contact patch for maximized grip in turns, while also adding sidewall stability.Specs
COMPATIBILITY: Tubeless ready / compatible
HUB: Synthesis Ratchet
HUB TYPE: Centerlock
AXLE SPACING: 12x100mm TA
RIM MATERIAL: Carbon
MIN/MAX TIRE SIZE: 30-55mm
INNER RIM WIDTH: 26.5mm
OUTER RIM WIDTH: 31mm
RIM HEIGHT: 21mm
SPOKE COUNT: 28
SPOKES: Sapim D-Light
WEIGHT PER SET: 1517g (650B), 1544g (700C)
WARRANTY: Lifetime (rim only)
E-BIKE COMPATIBILITY: No
Where Comfort Meets Performance.Drawing inspiration from Synthesis mountain bike wheels, crankbrothers new gravel wheelsets are engineered to deliver an unparalleled riding experience, even on the most challenging terrain. Designed with compliance in mind, our Synthesis Gravel wheels offer a smooth and comfortable ride thanks to their wider rim profile.With enhanced stability and traction, Synthesis Gravel wheels provide optimal performance for adventurous gravel rides that demand durability and reliability. These wheelsets are crafted to last, making them excellent for long-distance rides and rugged adventures.Wheels sold individually not in sets.Tuned Carbon Wheel System for gravel riding on even the most challenging terrain.Compliant tuned front and rear wheels improve handling and maximize grip and control in turns.Wide 26.5mm inner rim width optimized to support tires from 40mm-48mm, providing increased tire volume and contact patch for maximized grip in turns, while also adding sidewall stability.Specs
COMPATIBILITY: Tubeless ready / compatible
ENGAGEMENT: 10º
HUB: Synthesis Ratchet
HUB TYPE: Centerlock
AXLE SPACING: 142x12mm TA
RIM MATERIAL: Carbon
MIN/MAX TIRE SIZE: 30-55mm
INNER RIM WIDTH: 26.5mm
OUTER RIM WIDTH: 31mm
RIM HEIGHT: 21mm
SPOKE COUNT: 28
SPOKES: Sapim D-Light
WEIGHT PER SET: 1517g (650B), 1544g (700C)
WARRANTY: Lifetime (rim only)
E-BIKE COMPATIBILITY: No
The Dirt Hero off-road balance bike takes 12" & 14" wheel sizes. The wheel kits come with everything you need to change your wheel size.2 x wheels with Vee Tire Co Crown Gem 2.25" off-road tyres Dropout adapters
Spokes: 2mm stainless steel
Lacing: 16x radial lacing
Front hub: KRS custom through axle 100mm
Rear hub: KRS custom through axle with disc brake mount 100mm
Tyres: Vee Tire Co Crown Gem 2.25†14â€
The Dirt Hero off-road balance bike takes 12" & 14" wheel sizes. The wheel kits come with everything you need to change your wheel size.2 x wheels with Vee Tire Co Crown Gem 2.25" off-road tyres Dropout adapters
Spokes: 2mm stainless steel
Lacing: 16x radial lacing
Front hub: KRS custom through axle 100mm
Rear hub: KRS custom through axle with disc brake mount 100mm
Tyres: Vee Tire Co Crown Gem 2.25†12"
Details
Mountain bike tuned carbon wheel system for e-bikes.
Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.
Compliant tuned front wheel improves handling and maximizes grip and control in turns.
Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed.
 Specs
Engagement: 17º six pawls
ETRTO: 622mm (29)
Hub: crankbrothers Synthesis standard
Inner Rim Width: Front 31.5mm, Rear 31.5mm
Outer Rim Width: Front 38.7mm, Rear 39.5mm
Rim Height 18.75mm
Spoke Count: Front 32, Rear 32
Spoke Type: 
Warranty: Lifetime (rim only)
Mountain bike's first tuned carbon wheel system for enduro riding and racing.Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning.Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.Specs
Engagement: 17º (x6)
ETRTO (27.5): 585mm
ETRTO (29): 622mm
Hub: Synthesis Standard
Inner rim width front: 31.5mm
Inner rim width rear: 29.5mm
Outer rim width front: 37.5mm
Outer rim width rear: 36.5mm
Rim height: 18mm
Spoke count front: 28
Spoke count rear: 32
Spokes front: Sapim D-Light
Spokes rear: Sapim Race
Warranty: Lifetime (rim only)
Weight per set (27.5): 1845g
Weight per set (29): 1905g
Â
Details:
Mountain bike's first tuned carbon wheel system for enduro riding and racing.
Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.
Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning.
Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.
 Specs:
Engagement: 0.52º quiet engagement / six pawls
ETRTO: 585mm (27.5), 622mm (29)
Hub: Industry Nine Hydra
Inner Rim Width: Front 31.5mm, Rear 29.5mm
Outer Rim Width: Front 37.5mm, Rear 36.5mm
Rim Height 18mm
Spoke Count: Front 28, Rear 32
Spoke Type: Sapim CX-Ray (front), CX-Sprint (Rear)
Warranty: Lifetime (rim only)
Weight: 1760g per set (27.5), 1825g per set (29)
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stiff rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stiff rear wheel enhances stability and tracking at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight. The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Rear wheel
Inner rim width - 29.5
Spoke count - 32
Spokes - Sapim Race
Weight - 1018g 27.5 / 1048g 29
Hub engagement - 4 degrees
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stiff rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stiff rear wheel enhances stability and tracking at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight. The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Rear wheel
Inner rim width - 29.5
Spoke count - 32
Spokes - Sapim Race
Weight - 1062g 27.5 / 1095g 29
Hub engagement - 17 degrees
The DRIFT, what's in the name, is the FFWD's first wheelset specifically designed for gravel bikes. The rims with an inner width of 24mm makes it possible to fit tires from 30 up to even 60mm wide. And of course the DRIFT wheels fully tubeless ready out of the box.Because wheels have to suffer a lot during gravel rides, the DRIFT is equipped with thicker spokes for more stability and durability. Yet the total weight of the DRIFT wheelset is only 1515 grams.FULL CARBON TUBELESS READY RIMSWith a medium rim profile of 36mm high, the DRIFT offers the perfect balance between stiffness and comfort, with great handling as a result. Do you really want to get everything out of your DRIFT wheels? Pick the ultimate experience with tubeless tires. Minimal rolling resistance and a combination of optimum handling and protection at low tire pressures. With the DRIFT you are all set!HIGH-END HUBS TO CHOOSE FROMWithout any doubt hubs are an critical part, perhaps the most critical part of high-end wheels. The DRIFT wheels offer you to choose our own branded FFWD hubs, which offer you a very solid and reliable technology without compromising on quality and durability. You want to save extra weight in combination with a higher precision and stiffness? Then the DT 240 hubs with the improved EXP ratchet system may be the best choice!All are 12mm thru axles compatible, but thanks to the conversion kits they can be converted to a 15mm thru axle or quick release mount in no time.WHAT'S IN THE BOX
DRIFT wheelset (front and rear)
FFWD branded wheel bag
Pre-installed tubeless tape
Tubeless valves
Disc rotors not included!
OUR REBEL WITH OUTSTANDING PERFORMANCEUltra-light, super fast acceleration, and sublime driving characteristics: the RYOT 55 is your perfect partner in crime!With a very low weight of only 1700 grams a pair and optimized aerodynamics, the RYOT 55 is the wheelset of choice wherever the wind blows. These full carbon wheels with a medium rim profile offer great comfort whatever surface you ride on.MEMBER OF THE RYOT FAMILYThis is our No. 1 all-rounder which include a perfect balance between low weight, excellent aerodynamics and razor-sharp handling. Sprints, explosive climbs and crazy road surfaces: the RYOT 55 will guide you through all elements that cross your roads.RIMS BASED ON LAW TECHNOLOGYThe RYOT 55 rim is based on the LAW (Laminair Airflow Wing) technology. The wider LAW rim profile results in improved aerodynamics and also provides higher comfort, partly due to the use of wider tires. Thanks to the internal width of the rim, it is suitable for mounting tyres up to 42mm, this makes the RYOT 55 a great wheelset for gravel and cyclocross.HIGH-END HUBS TO CHOOSE FROMWithout any doubt hubs are a critical part, perhaps the most critical part of high-end wheels. These RYOT 55 wheels offer you our own branded FFWD hubs, which give you very solid and reliable technology without compromising on quality and durabilityAll are 12mm thru axles compatible, but thanks to the conversion kits they can be converted to a 15mm thru axle or quick release mount in no time.WHAT'S IN THE BOX
RYOT 55 wheelset front only
FFWD branded wheel bag
Pre-installed tubeless tape
Tubeless valves
Disc rotors not included!
GENERAL
Aero Shape: LAW
Brakes: Disc brake
Max Rider Weight 120 kg
Tubeless Ready Yes
Innertube Compatible Yes
RIM
Rim Type Full Carbon Clincher
Height 55 mm
Internal Width 21 mm
External Width 31 mm
Tire Range 23 mm - 42 mm
Max Tire Pressure 8.3 bar / 120.4 psi
SPOKES
Spokes Type Straight pull
Count 24/24
NIPPLESNipples Type 15mm prolock
Tuned Front and Rear Alloy Wheel System for e-mtb riding and racing.Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning.Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.Welded and sleeved rim joint for additional strength. Rims sold individually not in sets.Specs
ETRTO: 585mm (27.5) / 622mm (29)
Rim material: 6013 T6 Alloy
Inner rim width: 31.5mm (27.5 and 29) / 35.5mm (27.5+)
Outer rim width: 36.5mm (27.5 and 29) / 40.3mm (27.5+)
Rim height: 21mm
Spoke holes: 28 (front) / 32 (rear)
Weights: 928g (27.5+, front), 980g (29, front), 1174g (27.5, rear), 1181g (27.5+, rear), 1238g (29, rear)
Tubular - The choice of many pro’s!Where teams are more and more experimenting with a tubeless setup, some wheel brands are not putting effort in the development of tubular wheels or even stop producing them.Due to a close relation with many (professional) teams FFWD has learned that the tubular wheels remain popular and are the preferred choice for most teams. As believers of tubular wheels and its benefits for teams FFWD will continue the development and production of this category.Two years ago a development process started with Team Direct Energie and in specific classics specialist Niki Terpstra. Following the team in the recognition of the Tour of Flanders and Paris-Roubaix the goal was to develop a set that would have all it needs on any terrain and in any condition.The new tubular rim profile is based on the feedback from the field-test together with the aero tests done in the development of the LAW rim shape. Therefore the rims carry the label 'TEAM Tech'.The new tubular rims are optimised for minimal 25mm tires and also work perfectly with 28mm tires. Both sizes have a perfect airflow around the tire and a smooth transition to the rim to get aerodynamic advantage. The ability to fit wider tires also brings flexibility for teams to choose the right material for challenging conditions such as cobbled roads.The RYOT family has been introduced with a new FFWD decal design. Based on the hexagons which come from the SynergySix profile all new models got a spectacular new look. Where all new models are only available in black the 'TEAM Tech' wheels will have white logo's to ensure visibility in the races.As riders always require the best material and their mechanics look for the most durable parts these wheels are only available with the DT240 hubs.
Rim height: 55mm
External rim width: 25mm
Hubs: DT Swiss 240
Brake Type: Centrelock Disc
Weight: 1,470g
Weight limit: 120kg
Max tyre pressure: 120psi
3 year warranty
Hand built in Holland
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stiff rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stiff rear wheel enhances stability and tracking at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight. The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Rear wheel
Inner rim width - 31.5 27.5/29, 35.5 27.5+Â
Spoke count - 32
Spokes - Sapim E-Strong
Weight - 1238g 29 / 1174g 27.5 / 1181g 27.5+
Hub engagement - 17 degrees Â
Details:
Mountain bike's first tuned carbon wheel system for enduro riding and racing.
Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.
Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning.
Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.
 Specs:
Engagement: 0.52º quiet engagement / six pawls
ETRTO: 585mm (27.5), 622mm (29)
Hub: Industry Nine Hydra
Inner Rim Width: Front 31.5mm, Rear 29.5mm
Outer Rim Width: Front 37.5mm, Rear 36.5mm
Rim Height 18mm
Spoke Count: Front 28, Rear 32
Spoke Type: Sapim CX-Ray (front), CX-Sprint (Rear)
Warranty: Lifetime (rim only)
Weight: 1760g per set (27.5), 1825g per set (29)
The FFWD Full Carbon Clincher DISC Wheel serves a demand especially in the Triathlon scene. Benefit from a Full Carbon DISC wheel for clincher tires and choose your optimal combination with front wheels from 45mm (F4R), 60mm (F6R) or even 90mm (F9R)!The FFWD DISC wheels are built for optimal aerodynamics and stiffness.Available in both disc and rim brake versions with Shimano/SRAM XDR freehub body.FFWD wheels are always shipped as a complete package including most common accessories protected by a nice wheel bag.
Weight: Rim Brake - 1,430g, DB - 1440g
External rim width: 22.4mm
Weight limit: 100kg
Max tyre pressure: 130psi
3 year warranty
Hand built in Holland
The FFWD Full Carbon Tubular DISC Wheel serves a demand especially in the Triathlon scene. Benefit from a Full Carbon DISC wheel for tubular tires and choose your optimal combination with front wheels from 45mm (F4R), 60mm (F6R) or even 90mm (F9R)!The FFWD DISC wheels are built for optimal aerodynamics and stiffness.Available in both disc and rim brake versions with Shimano/SRAM XDR freehub body.FFWD wheels are always shipped as a complete package including most common accessories protected by a nice wheel bag.
Weight: Rim Brake - 1,160g, DB - 1240g
External rim width: 22.4mm
Weight limit: 100kg
Max tyre pressure: 130psi
3 year warranty
Hand built in Holland
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stiff rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stiff rear wheel enhances stability and tracking at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight.  The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Front wheel
Inner rim width - 31.5
Spoke count - 28
Spokes - Sapim D-Light
Weight - 877g 27.5 / 902 29
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stiff rear wheel to achieve optimum ride characteristics for each.  The compliant front wheel improves handling and control in the turns, while a stiff rear wheel enhances stability and tracking at speed.  In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight. The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible.  There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement.  Enduro and XCT rim only availability also gives the option for custom wheel building.Front wheel
Inner rim width - 31.5 27.5/29, 35.5 27.5+ 
Spoke count - 28
Spokes - Sapim E-Light 
Weight - 980g 29 / 915g 27.5 / 928g 27.5+
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stiff rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stiff rear wheel enhances stability and tracking at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight. The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Front wheel
Inner rim width - 31.5
Spoke count - 28
Spokes - Sapim D-Light
Weight - 837g 27.5 / 865 29
