Enduro's ABEC 5 is the next performance step up from the popular ABEC 3 range. By using military level, high precision HRC-64 hardened Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing.
Bearing Code: 61901
Dimensions: 12mm x 24mm x 6mm
ABEC: 5
Grade: 5
Seals: LLU/LLB
Grease: Kyodo Yushi PS-2
Application: Hubs, Bottom Brackets
Ceramic Hybrid combines the chromium steel races found in Enduro's ABEC 5 range with Grade 5 ceramic (Silicon Nitride - Si3n4) balls found in Zero Ceramic bearings. This combination creates a lighter, more efficient and more affordable ceramic bearing, perfect for use in hubs or bottom brackets. The low contact LLB seals provide protection from water or dirt ingress, but without causing any friction or drag.
Bearing Code: 689
Dimensions: 9mm x 17mm x 5mm
ABEC: 5
Grade: 5
Seals: 2RS
Grease: Kyodo Yushi PS-2
Application: Hubs, Bottom Brackets
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S6200
Dimensions: 10mm x 30mm x 9mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease: Mobile HP 222
Application: Hubs, Bottom Brackets
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S6800
Dimensions: 10mm x 19mm x 5mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease: Mobile HP 222
Application: Hubs, Bottom Brackets
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S6801
Dimensions: 12mm x 21mm x 5mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease: Mobile HP 222
Application: Hubs, Bottom Brackets
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.
Bearing Code: SMR 22378
Dimensions: 22 x 37 x 8/11,5mm
ABEC: 3Â
Grade: 10
Seals: LLB-E
Grease: Kyodo Yushi PS-2
Application: Bottom Brackets
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: SMR 2437
Dimensions: 24mm x 37mm x 7mm
ABEC: 3
Grade: 10
Seals: LLB
Grease: Mobile HP 222
Application: Hubs, Bottom Brackets
Enduro's Stainless Steel MAX bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S6901
Dimensions: 12mm x 24mm x 6mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease: Mobile HP 222
Application: Hubs, Bottom Brackets
Weight: 10.88g
Enduro's Stainless Steel MAX bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S6902
Dimensions: 15mm x 28mm x 7mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease: Mobile HP 222
Application: Hubs, Bottom Brackets
Weight: 15.85g
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S6000
Dimensions: 10mm x 26mm x 8mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease:Â Mobile HP 222
Application:Â Hubs, Bottom Brackets
Weight: 10.41g
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S608
Dimensions: 8mm x 22mm x 7mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease:Â Mobile HP 222
Application:Â Hubs, Bottom Brackets
Weight: 11.16g
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S6201
Dimensions: 12mm x 32mm x 10mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease:Â Mobile HP 222
Application:Â Hubs, Bottom Brackets
Weight: 34.70g
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S6803
Dimensions: 17mm x 26mm x 5mm
ABEC: 3
Grade: 10
Seals:Â LLB
Grease:Â Mobile HP 222
Application:Â Hubs, Bottom Brackets
Weight: 7.34g
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S6806
Dimensions: 30mm x 42mm x 7mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease:Â Mobile HP 222
Application:Â Hubs, Bottom Brackets
Weight: 21.25g
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S688
Dimensions: 8mm x 16mm x 5mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease: Mobile HP 222
Application: Hubs, Bottom Brackets
Weight: 3.70g
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S6901
Dimensions: 12mm x 24mm x 6mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease: Mobile HP 222
Application: Hubs, Bottom Brackets
Weight: 10.41g
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.
Bearing Code: S698
Dimensions: 8mm x 19mm x 6mm
ABEC: 3
Grade: 10
Seals: 2RS
Grease:Â Mobile HP 222
Application:Â Hubs, Bottom Brackets
Weight: 6.69g
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.
Bearing Code: BA 85 Z
Dimensions: 1/2 x 11/16 x 5/16"
Application: Frame Pivot, Pedals
Weight: 4.39g
Radial Bottom Bracket Bearing featuring 52100 High-Carbon Chromium alloy races paired with grade 5 Balls with 90% fill, high-pressure, water-proof grease. Designed specifically bicycle applications, the LLU/LLB seal combination on these bearings utilizes a more protective LLU seal facing outward, towards the elements, to reduce contamination from water or dirt, while the lighter-contact (less seal-drag) LLB seal face inward to keep the grease where it belongs.The most common use for this bearing is as a direct replacement bearing for Shimano external cup BBs when using the plastic Shimano bearing insert. If you wish to avoid using the plastic insert MR 2437 is the correct bearing for the job.
Bearing Code: 6805 (61805)
Dimensions: 25mm x 37mm x 7mm
ABEC: 5
Grade: 5
Seals: llu/LLB
Grease: Kyodo Yushi PS-2
Application: Hubs, Bottom Brackets
Weight: 20.37g
The ultimate bearing. XD-15 uses an angular contact design to provide the perfect preload. Combined with the advanced lightweight nitrogen steel races and oversized grade 3 Cerbec ceramic balls, XD-15 is smoother and has a greater load capacity than any other bearing on the market. Now with Limited Lifetime Warranty against manufacturing defect.
Bearing Code: ACB 6808 CC
Dimensions: 40mm x 52mm x 6.5mm
ABEC: 5
Grade: 3
Seals: LLB
Grease: Kyodo Yushi PS-2
Application: Headsets
CXD 3802 LLB W - XD-15 Ceramic-Hybrid, ABEC-5, Double-Row, Radial Bearing (C3 Clearance) - 15mm x 24mm x 10mmAn Enduro Bearings exclusive, our XD-15 Ceramic-Hybrid bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 3 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. Dual-lip labyrinth (LLB) seals protect from the elements, and contain the 90% fill Kluber NBU52 grease that runs smoother with time and is highly resistant to being washed out.The most impressive feature of XD-15 ceramic-hybrid bearings is, unlike other bearings, they only get better with time and use. As the bearings wear-in, the super-hard ceramic balls actually make the XD-15 races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will become faster and smoother with time and use, while the other ceramic-hybrid options will only get slower. We are so confident in the performance of XD-15 Ceramic-Hybrid bearings that we offer an unlimited lifetime bearing and race warranty.This bearing is used primarily by White Industries in their rear hubs. The extra-wide double-row design greatly reduces flex in the axle of the rear hub, while precisely filling the same space as two 6802 single-row bearings.The Enduro line of bearings are available in High-Carbon Chromium Steel, 440C Stainless Steel, Ceramic-Hybrid and XD-15 with Ceramic or Stainless Balls. Our bearings are always engineered with deep groove races to accommodate the largest balls possible. All of our standard bearings feature dual-lip seals that ride in a micro groove creating a full labyrinth to provide ultimate protection against the elements.
Static Load - 520 lbf, 2.31 Kn
Weight: 10.5g
MR 15267 LLU/LLB A5 CN - ABEC-5 Radial Bearing (CN Clearance) - 15mm x 26mm x 7mmRadial bearing generally used as a hub bearing and can be used as a pivot bearing, though the MAX-type version of this bearing is better suited for suspension use. This ABEC-5 bearing features deep-groove design races, with Grade 10 balls, dual-lip, full-contact LLU seals facing outwards to withstand daily abuse of use and the elements, and to contain 90% fill with Mobil XHP 22 high-pressure water-proof grease. The Enduro line of bearings are available in High-Carbon Chromium Steel, 440C Stainless Steel, Ceramic-Hybrid and XD-15 with Ceramic or Stainless Balls. Our bearings are always engineered with deep groove races to accommodate the largest balls possible. All of our standard bearings feature dual-lip seals that ride in a micro groove creating a full labyrinth to provide ultimate protection against the elements.
Static Load: 390 lbf, 1.73 Kn
Weight: 11.2g
61902 LLU/LLB A5 - ABEC-5 Radial Bearing (CN Clearance) - 15mm x 28mm x 7mmEnduro ABEC-5 radial bearings feature 52100 High-Carbon Chromium alloy races paired with grade 10 Balls. Enduro engineers all of our radial bearings with deeper grooves to accommodate the largest balls possible, providing maximum bearing contact area and greatly increased bearing life. Designed specifically bicycle applications, the LLU/LLB seal combination on these bearings utilizes a more protective LLU seal facing outward, towards the elements, to reduce contamination from water or dirt, while the lighter-contact (less seal-drag) LLB seals facing inward keep the 90% fill Mobil XHP 222 high pressure grease where it belongs.This size bearing is generally used as a hub bearing and can be used as a pivot bearing, though the MAX-type version of this bearing is better suited for suspension use.The Enduro line of bearings are available in High-Carbon Chromium Steel, 440C Stainless Steel, Ceramic-Hybrid and XD-15 with Ceramic or Stainless Balls. Our bearings are always engineered with deep groove races to accommodate the largest balls possible. All of our standard bearings feature dual-lip seals that ride in a micro groove creating a full labyrinth to provide ultimate protection against the elements.
Static Load: 563 lbf, 2.5 Kn
Weight: 27.4g
MR 18287 LLB - ABEC-3, Radial Bearing (C3 Clearance) - 18mm x 28mm x 7mmThis ABEC-5 bearing features deep-groove design races, with Grade 10 balls, dual-lip, labyrinth, LLB seals to withstand daily abuse of use and the elements and contain the 90% fill Mobil XHP 222 high-pressure water-proof synthetic grease.  Radial bearing generally used as a hub bearing, and can be used as a pivot bearing though the MAX-type version of this bearing is better suited for suspension use.The Enduro line of bearings are available in High-Carbon Chromium Steel, 440C Stainless Steel, Ceramic-Hybrid and XD-15 with Ceramic or Stainless Balls. Our bearings are always engineered with deep groove races to accommodate the largest balls possible. All of our standard bearings feature dual-lip seals that ride in a micro groove creating a full labyrinth to provide ultimate protection against the elements.
Static Load: 438 lbf, 1.94 Kn
Weight - 15.1g
